WP_Cloudy

Section

Archive

November 2022
M T W T F S S
« Oct    
 123456
78910111213
14151617181920
21222324252627
282930  
  • milltek Comments Off
    Milltek-Res-3in-R-Style-Cat-Back-Race-Exhaust-System-Suits-VW-Golf-MK6-GTI-01-lmpo Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI

    Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI
    Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI. A Milltek Catback Exhaust System replaces the rear half of your exhaust from the catalytic converter back. This gives you the best of both worlds, improved sound and looks, but no worries about legality. Replacing stock pipework with wider, better designed Milltek pipework releases more performance from your cars engine. A new Milltek backbox and silencers will give your car a sporty, but refined sound. Sporty but refined sound. Lightweight and durable stainless steel. Outstanding fit and quality. A Cat-back exhaust hooks up to your factory system behind the main cat, replacing the pipework, silencers, and back-boxes with new Milltek kit. Millteks pipework will be carefully computer designed to increase flow-rate with wider pipework and carefully designed mandrel bends. This means your engine can breathe more freely and means getting the exhaust gasses out is not limiting how quickly it can get air in. A badly designed exhaust can actually reduce torque low down the rev range, but Milltek have the depth of engineering know-how necessary to increase top-end without loss of drivability. Genuine power increases are often achievable with just the exhaust, but it gets really good when the exhaust is paired up with new software and other breathing mods for the engine. Milltek use either hard-wearing T304 Stainless Steel or Titanium. Both are durable and sound great. Milltek put a lot of work into engineering the sound of the exhaust. Anyone can make a car louder. Milltek carefully tune the silencers in the system to offer a sporty, but refined sound. The exhaust is designed to sound fierce when you drive the car hard, but not to drone at idle or when cruising. On some systems there will be a choice of “resonated” or “non-resonated”. Resonated typically have either extra or quieter silencers in place and will be quieter. Milltek take fit and build quality very seriously. Any of their exhausts should just fit directly in place of the original equipment. For a great all-round upgrade, that will leave your car road-legal and refined, but increase power and noise a Milltek Cat-Back is easy to recommend. 27.11.2022, 07:05:59. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone, fax and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. OVERSEAS DELIVERIES: We can send items anywhere in the world! We work hard to bring you the most competitive pricing available and we won’t stop there. If you have seen the same product elsewhere for less, let us know and we’ll endeavour to match the price. Printed evidence of offer may be required; our staff will verify the offer. The competitor’s price must be available to all customers and exclude any personal discounts. We will only price match on like for like purchasing routes i. This price promise cannot be used in conjunction with any offer or discount. This price promise is undertaken in good faith and within the bounds of the law; it can be withdrawn at any time without notice. Final decision on the validity of a price promise request will rest with Demon Tweeks. For the sizing guide. Oil, Fluid & Liquid Shop. Demon Tweeks, 75 Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG, United Kingdom. GB 840 2501 70. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “demontweeksdirect” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Bahrain, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Brunei Darussalam, Egypt, Guernsey, Gibraltar, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Oman, Pakistan, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Kuwait, Philippines, Qatar, Vietnam.
    • Manufacturer: Milltek
    • Brand: Milltek
    • MPN: SSXVW243
    • Manufacturer Part Number: SSXVW243
    • NOTE: 2x 100mm Round GT Cerakote Black Tailpipes

    Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI

    Tags: , , , , , , ,

  • milltek Comments Off
    Milltek-3-Race-Cat-Back-Exhaust-System-Volkswagen-Golf-Mk6-GTi-01-qeyo Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi
    Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi

    Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi
    Milltek Sport exhaust systems are manufactured using aircraft grade stainless steel and machined to precision for maximum performance. Lower pressures within the Milltek Sport systems means performance is not restricted, resulting in greater driveability, sharper throttle response and, of course, increased horsepower and torque. On most after market exhaust systems, any power gains come with an unacceptable increase in volume levels. Milltek Sport pride themselves on offering exhaust systems that are engineered for performance rather than noise. Fitting a Milltek Sport exhaust will improve the tone of your engine’s voice, but will do so with a subdued deeper tone. Model: Golf GTi MK6. If you require your parts quickly then please check stock before ordering to avoid any unexpected lead time. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “amber-performance” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Manufacturer Part Number: SSXVW244
    • Classic Car Part: No
    • Brand: Milltek

    Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi

    Tags: , , , , , ,

  • milltek Comments Off
    Milltek-Citroen-DS3-1-6-16V-DSport-Racing-Stainless-Exhaust-System-Res-EC-TUV-01-wgj Milltek Citroen DS3 1.6 16V DSport & Racing Stainless Exhaust System Res EC/TUV
    Milltek Citroen DS3 1.6 16V DSport & Racing Stainless Exhaust System Res EC/TUV
    Milltek Citroen DS3 1.6 16V DSport & Racing Stainless Exhaust System Res EC/TUV
    Milltek Citroen DS3 1.6 16V DSport & Racing Stainless Exhaust System Res EC/TUV

    Milltek Citroen DS3 1.6 16V DSport & Racing Stainless Exhaust System Res EC/TUV
    BRAND NEW MILLTEK STAINLESS STEEL CAT BACK SYSTEM RESONATED TO FIT CITROEN DS3. A Milltek Stainless Steel. (Includes – Front Silencer, Axle Pipe, Rear Silencer Assembly & Trim Assembly Twin 80mm GT80). EC / TUV Approval. For The European Community. Citroen DS3 1.6 THP 16v. 155bhp DSport & DS3 Racing 207bhp. MSCN123 – Front Silencer Assembly. MSCN124 – Axle Pipe. MSCN125 – Rear Silencer Assembly. MSVW370 x 2 – Trim Assembly Twin 80mm GT80. Pipe Diameter Size O. 2.50 (63.50mm). The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. Life Time Guarantee For The First Purchaser. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. UK MAINLAND & MOST AREAS OF SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. There is an Additional Courier Charge. To Send Items To These Areas Listed Below. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Other Exhaust & Emission Parts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Manufacturer: Citroen
    • Subtype: Cat Back System – Resonated Quieter EC/TUV
    • Type: Exhaust
    • Part Manufacturer: Milltek
    • Manufacturer Part Number: SSXCN101
    • Model/ Series: DS3 1.6 THP 16v DSport 155bhp & DS3 Racing 207bhp
    • Part Manufacturer Number: SSXCN101
    • Intended Use: Modification/ Enhancement
    • Other Part Number: SSXCN101
    • Brand: Milltek

    Milltek Citroen DS3 1.6 16V DSport & Racing Stainless Exhaust System Res EC/TUV

    Tags: , , , , , , ,

  • milltek Comments Off
    Milltek-GPF-Back-Race-Non-Resonated-Exhaust-System-For-Audi-RS3-8Y-Sportback-22-01-noex Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22

    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22
    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22- Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware. Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance. Rear Silencers / Axle back systems are designed to directly replace ther OE rear silencer with a freer flowing option, improving sound and aesthetics of the system. Milltek exhausts offers a significant increase in performance and torque due to reduction of back pressure and flow optimization. Less weight and the well-known Milltek sound are additional features, which puts Milltek sport exhausts aside from the rest. MSAU764REP: Centre Silencer Replacement Pipe (80mm Version). MSAU827: Race Rear Silencer. MSAU822: LH Inner Outlet Pipe. MSAU823: RH Inner Outlet Pipe. MSAU824: LH Valved Outlet Pipe. MSAU825: RH Valved Outlet Pipe. Available As Resonated (Quietest), Non-Resonated (Louder), Race (Loudest) – This listing is for the race varient (loudest system). Performance increase, low back pressure. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Perfect shape and fitment. Pipe Diameter is 3.15-inch (80.00mm). Audi RS3 8Y Sportback / Hatchback 2022. OPF/GPF equipped cars only. If there will be any delays in your order you will be informed within 24-48 hours. Distributed By Haz Motorsport. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “haz_motorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Pipe Diameter: 3.15-inch (80.00mm)
    • Product Type: GPF Back Exhaust
    • Manufacturer Part Number: SSXAU975
    • Vehicle Make: Audi
    • Vehicle Model: RS3 8Y 2022- Hatback / Sportback Only
    • Reference OE/OEM Number: SSXAU975, Milltek, Audi RS3 8Y Hatchback / Sportback, Race System
    • Brand: Milltek

    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22

    Tags: , , , , , , ,

  • yoshimura Comments Off
    Yoshimura-Racing-Exhaust-System-Suzuki-GSXR1100-H-1987-Slabside-Stainless-Steel-01-brh Yoshimura Racing Exhaust System Suzuki GSXR1100 H 1987 Slabside Stainless Steel
    Yoshimura Racing Exhaust System Suzuki GSXR1100 H 1987 Slabside Stainless Steel
    Yoshimura Racing Exhaust System Suzuki GSXR1100 H 1987 Slabside Stainless Steel

    Yoshimura Racing Exhaust System Suzuki GSXR1100 H 1987 Slabside Stainless Steel
    Chain and Sprocket Kits. DC / AFAM Chains & Sprockets. Yoshimura Racing Exhaust System Suzuki GSXR1100 H 1987 Slabside Stainless Steel. Genuine Brand New Yoshimura Exhaust The Cyclone race series exhausts are one of the classic Yoshimura exhausts. Their retro look, accompanied with their great sound and power have helped contribute the legacy today which is Yoshimura. This legendary exhaust system has been released for a limited period only. Genuine Brand New Yoshimura Exhaust. The Cyclone race series exhausts are one of the classic Yoshimura exhausts. (G, H and J Models). Baffle / DB Killer. Yes, Straight-Through When Removed. 96.5 / 104.5 dB at 4,750 rpm. System Removes Pillion Footrest Optional Bracket Available to Retain Footrest. Since “Yoshimura Motors” founded in Fukuoka, Japan in 1954, Pop Yoshimura started engine tuning in his own way. There was no information of engine tuning at that time, and he tuned many engines all by himself with his inspiration and knowledge in engineering. Soon, he later became famous for tuning among American armies, and he started to be called God Hand. He challenged everything to overcome problems and improve tuning ability by himself and his continuous challenges made many victories in various races. His years of experience made the name “Yoshimura” famous for the quality and the performance. Still more, the reputation has been created from various racing victories around the world. And they were the result of his unremitting effort. The company Yoshimura has done an expansion abroad in 1973 and Yoshimura companies Yoshimura Japan Co. And Yoshimura Research & Development of America, inc. Have been both started to grow dealing with motorcycle performance products. Pop became a man of legend with his achievement. And his son, Fujio, who inherited the spirit and the concept has been leading further growth of motor sports under the name of “Yoshimura”. The revolutionary design of Duplex exhaust system, MJN carburetor and Tri-Oval silencer were created from his idea and the technologies of the products have been achieving victories in races. His unflagging energy, the effort and the talent of creativity has been making Yoshimura name more firmly. Yoshimura keeps challenging from its establishment 1954. Since then the sprits live in all the Yoshimura products and the quality and the performance are the proof of it. Established in 1999, Performance Parts Ltd are the UK’s leading high performance motorcycle component wholesale distribution company. It is not by accident that many top racing teams use the same products that we distribute. All of our products are tough tested and evaluated before they make it into our portfolio. Very often this can mean that there are cheaper alternatives to our brands, but there is usually a very good reason why! We summarise this situation by using the phrase “The quality remains long after the price is forgotten”. Our dedicated team of well-trained, experienced staff are on hand Monday – Friday, 9.00 – 5.30 to take trade enquiries and offer technical advice. We pride ourselves on customer service and always attempt to operate with the common sense philosophy of “Treat your customer how you would like to be treated yourself”. Do I need to refuel my bike? Yoshimura dyno-develop their exhausts to run safely on a standard fuelling setup. Simply fit and enjoy! How loud is this exhaust? Yoshimura sound-engineer their exhausts to offer a much-improved sporty sound over standard. Models with removable baffle can be adapted to offer a straight-through racing sound once removed. Please note that not all products advertised are in stock at all times. Many sell out, and some are manufactured to order. Please note that we will not accept exhaust products for return if the engine has been started with the product fitted. Units 3-4, Broad March. Long March Industrial Estate. Yoshimura RS4 Exhaust Carbon Fibre End Cap Kit Suzuki RMZ 250 2015. Yoshimura Full Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Titanium. Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium. This item is in the category “Vehicle Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “ppl-1″ and is located in this country: GB. This item can be shipped worldwide.
    • To Fit Make: Suzuki
    • Manufacturer Part Number: 180-511-5250
    • Type: Header Back Exhaust
    • Brand: Yoshimura
    • Reference OE/OEM Number: 14305-06B01-000, 14305-06B61-000, 14305-06B21-000, 14305-06B51-000, 14305-06B31-000
    • Country/Region of Manufacture: Japan
    • Part Manufacturer: Yoshimura
    • Part Manufacturer Number: 180-511-5250

    Yoshimura Racing Exhaust System Suzuki GSXR1100 H 1987 Slabside Stainless Steel

    Tags: , , , , , , , ,

  • termignoni Comments Off
    Termignoni-Full-System-Race-Force-Titanium-Ducati-Panigale-1299-2016-16-2017-17-01-ffzb Termignoni Full System Race Force Titanium Ducati Panigale 1299 2016 16 2017 17
    Termignoni Full System Race Force Titanium Ducati Panigale 1299 2016 16 2017 17
    Termignoni Full System Race Force Titanium Ducati Panigale 1299 2016 16 2017 17
    Termignoni Full System Race Force Titanium Ducati Panigale 1299 2016 16 2017 17

    Termignoni Full System Race Force Titanium Ducati Panigale 1299 2016 16 2017 17
    TERMIGNONI FULL SYSTEM RACE FORCE TITANIUM DUCATI PANIGALE 1299. DOES NOT FIT WITH GENUINE PLATE AND REAR PEGS. The courier delivers from Monday to Friday. This item is in the category “Vehicle Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Exhaust & Emission Systems\Silencers, Mufflers & Baffles”. The seller is “mototopgun” and is located in this country: IT. This item can be shipped worldwide.
    • Brand: TERMIGNONI
    • Manufacturer Part Number: D17009400ITC
    • Product Type: Slip-On Exhausts & Silencers
    • Country/Region of Manufacture: Italy
    • Warranty: 2 Year
    • Compatibility: DUCATI
    • Model: PANIGALE 1299
    • Compatibility year: 2016 16 2017 17
    • Product: FULL SYSTEM RACING
    • Shape Exhaust: FORCE
    • Material Exhaust: TITANIUM
    • Inner Material Exhaust: STAINLESS STEEL
    • Exhaust Endcap: CARBON END CAP
    • Info 1: DOES NOT FIT WITH GENUINE PLATE AND REAR PEGS

    Termignoni Full System Race Force Titanium Ducati Panigale 1299 2016 16 2017 17

    Tags: , , , , , , ,

  • yoshimura Comments Off
    Yoshimura-Racing-Exhaust-System-Suzuki-GSXR1100-G-1986-Slabside-Stainless-Steel-01-cz Yoshimura Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Stainless Steel
    Yoshimura Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Stainless Steel
    Yoshimura Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Stainless Steel

    Yoshimura Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Stainless Steel
    Chain and Sprocket Kits. DC / AFAM Chains & Sprockets. Yoshimura Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Stainless Steel. Genuine Brand New Yoshimura Exhaust The Cyclone race series exhausts are one of the classic Yoshimura exhausts. Their retro look, accompanied with their great sound and power have helped contribute the legacy today which is Yoshimura. This legendary exhaust system has been released for a limited period only. Genuine Brand New Yoshimura Exhaust. The Cyclone race series exhausts are one of the classic Yoshimura exhausts. (G, H and J Models). Baffle / DB Killer. Yes, Straight-Through When Removed. 96.5 / 104.5 dB at 4,750 rpm. System Removes Pillion Footrest Optional Bracket Available to Retain Footrest. Since “Yoshimura Motors” founded in Fukuoka, Japan in 1954, Pop Yoshimura started engine tuning in his own way. There was no information of engine tuning at that time, and he tuned many engines all by himself with his inspiration and knowledge in engineering. Soon, he later became famous for tuning among American armies, and he started to be called God Hand. He challenged everything to overcome problems and improve tuning ability by himself and his continuous challenges made many victories in various races. His years of experience made the name “Yoshimura” famous for the quality and the performance. Still more, the reputation has been created from various racing victories around the world. And they were the result of his unremitting effort. The company Yoshimura has done an expansion abroad in 1973 and Yoshimura companies Yoshimura Japan Co. And Yoshimura Research & Development of America, inc. Have been both started to grow dealing with motorcycle performance products. Pop became a man of legend with his achievement. And his son, Fujio, who inherited the spirit and the concept has been leading further growth of motor sports under the name of “Yoshimura”. The revolutionary design of Duplex exhaust system, MJN carburetor and Tri-Oval silencer were created from his idea and the technologies of the products have been achieving victories in races. His unflagging energy, the effort and the talent of creativity has been making Yoshimura name more firmly. Yoshimura keeps challenging from its establishment 1954. Since then the sprits live in all the Yoshimura products and the quality and the performance are the proof of it. Established in 1999, Performance Parts Ltd are the UK’s leading high performance motorcycle component wholesale distribution company. It is not by accident that many top racing teams use the same products that we distribute. All of our products are tough tested and evaluated before they make it into our portfolio. Very often this can mean that there are cheaper alternatives to our brands, but there is usually a very good reason why! We summarise this situation by using the phrase “The quality remains long after the price is forgotten”. Our dedicated team of well-trained, experienced staff are on hand Monday – Friday, 9.00 – 5.30 to take trade enquiries and offer technical advice. We pride ourselves on customer service and always attempt to operate with the common sense philosophy of “Treat your customer how you would like to be treated yourself”. Do I need to refuel my bike? Yoshimura dyno-develop their exhausts to run safely on a standard fuelling setup. Simply fit and enjoy! How loud is this exhaust? Yoshimura sound-engineer their exhausts to offer a much-improved sporty sound over standard. Models with removable baffle can be adapted to offer a straight-through racing sound once removed. Please note that not all products advertised are in stock at all times. Many sell out, and some are manufactured to order. Please note that we will not accept exhaust products for return if the engine has been started with the product fitted. Units 3-4, Broad March. Long March Industrial Estate. Yoshimura RS4 Exhaust Carbon Fibre End Cap Kit Suzuki RMZ 250 2015. Yoshimura Full Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Titanium. Yoshimura Racing Exhaust System Suzuki GSXR1100 H 1987 Slabside Stainless Steel. Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium. This item is in the category “Vehicle Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “ppl-1″ and is located in this country: GB. This item can be shipped worldwide.
    • To Fit Make: Suzuki
    • Manufacturer Part Number: 180-511-5250
    • Type: Header Back Exhaust
    • Brand: Yoshimura
    • Reference OE/OEM Number: 14305-06B01-000, 14305-06B61-000, 14305-06B21-000, 14305-06B51-000, 14305-06B31-000
    • Country/Region of Manufacture: Japan
    • Part Manufacturer: Yoshimura
    • Part Manufacturer Number: 180-511-5250

    Yoshimura Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Stainless Steel

    Tags: , , , , , , , ,

  • yoshimura Comments Off
    Yoshimura-Full-Racing-Exhaust-System-Suzuki-GSXR1100-J-1988-Slabside-Titanium-01-jr Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium
    Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium
    Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium
    Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium
    Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium
    Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium
    Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium

    Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium
    Chain and Sprocket Kits. DC / AFAM Chains & Sprockets. Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium. Genuine Brand New Yoshimura Exhaust. The Cyclone race series exhausts are one of the classic Yoshimura exhausts. Their retro look, accompanied with their great sound and power have helped contribute the legacy today which is Yoshimura. This legendary exhaust system has been released for a limited period only. (G, H and J Models). Baffle / DB Killer. Yes, Straight-Through When Removed. 96.5 / 104.5 dB at 4,750 rpm. System Removes Pillion Footrest Optional Bracket Available to Retain Footrest. Since “Yoshimura Motors” founded in Fukuoka, Japan in 1954, Pop Yoshimura started engine tuning in his own way. There was no information of engine tuning at that time, and he tuned many engines all by himself with his inspiration and knowledge in engineering. Soon, he later became famous for tuning among American armies, and he started to be called God Hand. He challenged everything to overcome problems and improve tuning ability by himself and his continuous challenges made many victories in various races. His years of experience made the name “Yoshimura” famous for the quality and the performance. Still more, the reputation has been created from various racing victories around the world. And they were the result of his unremitting effort. The company Yoshimura has done an expansion abroad in 1973 and Yoshimura companies Yoshimura Japan Co. And Yoshimura Research & Development of America, inc. Have been both started to grow dealing with motorcycle performance products. Pop became a man of legend with his achievement. And his son, Fujio, who inherited the spirit and the concept has been leading further growth of motor sports under the name of “Yoshimura”. The revolutionary design of Duplex exhaust system, MJN carburetor and Tri-Oval silencer were created from his idea and the technologies of the products have been achieving victories in races. His unflagging energy, the effort and the talent of creativity has been making Yoshimura name more firmly. Yoshimura keeps challenging from its establishment 1954. Since then the sprits live in all the Yoshimura products and the quality and the performance are the proof of it. Established in 1999, Performance Parts Ltd are the UK’s leading high performance motorcycle component wholesale distribution company. It is not by accident that many top racing teams use the same products that we distribute. All of our products are tough tested and evaluated before they make it into our portfolio. Very often this can mean that there are cheaper alternatives to our brands, but there is usually a very good reason why! We summarise this situation by using the phrase “The quality remains long after the price is forgotten”. Our dedicated team of well-trained, experienced staff are on hand Monday – Friday, 9.00 – 5.30 to take trade enquiries and offer technical advice. We pride ourselves on customer service and always attempt to operate with the common sense philosophy of “Treat your customer how you would like to be treated yourself”. Do I need to refuel my bike? Yoshimura dyno-develop their exhausts to run safely on a standard fuelling setup. Simply fit and enjoy! How loud is this exhaust? Yoshimura sound-engineer their exhausts to offer a much-improved sporty sound over standard. Models with removable baffle can be adapted to offer a straight-through racing sound once removed. Please note that not all products advertised are in stock at all times. Many sell out, and some are manufactured to order. Please note that we will not accept exhaust products for return if the engine has been started with the product fitted. Units 3-4, Broad March. Long March Industrial Estate. Yoshimura RS4 Exhaust Carbon Fibre End Cap Kit Suzuki RMZ 250 2015. Yoshimura Full Racing Exhaust System Suzuki GSXR1100 G 1986 Slabside Titanium. Yoshimura Racing Exhaust System Suzuki GSXR1100 H 1987 Slabside Stainless Steel. This item is in the category “Vehicle Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “ppl-1″ and is located in this country: GB. This item can be shipped worldwide.
    • To Fit Make: Suzuki
    • Type: Header Back Exhaust
    • Brand: Yoshimura
    • Manufacturer Part Number: 180-511-5280
    • Reference OE/OEM Number: 14305-06B01-000, 14305-06B61-000, 14305-06B21-000, 14305-06B51-000, 14305-06B31-000
    • Country/Region of Manufacture: Japan
    • Part Manufacturer: Yoshimura
    • Part Manufacturer Number: 180-511-5280

    Yoshimura Full Racing Exhaust System Suzuki GSXR1100 J 1988 Slabside Titanium

    Tags: , , , , , , , ,

  • pumaspeed Comments Off
    Pumaspeed-Racing-Toyota-GR-Yaris-GPF-Back-Resonated-Race-Exhaust-System-01-ri Pumaspeed Racing Toyota GR Yaris GPF-Back Resonated Race Exhaust System

    Pumaspeed Racing Toyota GR Yaris GPF-Back Resonated Race Exhaust System
    Amazing Flow and Louder Noise. Increased Performance Potential – Perfect for Remapped Cars. Designed here in-house, and fabricated in the UK. Class & Quality of the Pumaspeed Racing Brand. Supplied with Factory-Look 100mm Polished Tips. The NEW Toyota GR Yaris performance exhaust from Pumaspeed is the quality system this car deserves. Custom fabricated here in the UK to the design spec developed here in house. Crafted in high-quality type 304 aircraft grade stainless steel, which is anti-magnetic and therefore less susceptible to discoloration and wear. The full 76mm (3 inch) bore allows for estimated power outputs of over 400bhp due to our complex research and analysis across the many months of owning our own GR Yaris. The pipes to the rear tips are perfectly scultped to aid in faster airflow without blockage or voids, making not only the best potential for performance, but a perfect’roar’ tone without any drone. This design is perfect for those looking for a nicer noise note on the standard car, or for those who plan to add a GPF/OPF delete or uprated downpipe. What comes included in this system? The Resonated Race version of this system features a Race Y section at the rear with NO silencers, plus a middle section with a silencer, making this the second loudest GPF back system that we offer. We recommend this system to anyone who is craving far more noise than the stock system, with the possibility of changing GPF/downpipe options in the future. The system is also supplied with all the necessary hardware to fit: nuts, bolts and a connecting gasket. Do you offer any other exhaust volumes? Absolutely, our aim has always been to design an exhaust system which is suitable to any GR Yaris owner, we therefore have developed 4 different systems to cater for the wide range of customer requirements. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “pumaspeedperformance” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Toyota
    • Classic Car Part: No
    • Custom Bundle: No
    • Manufacturer Part Number: PSGRResRace
    • Modified Item: No

    Pumaspeed Racing Toyota GR Yaris GPF-Back Resonated Race Exhaust System

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-Audi-R8-V10-Spyder-Stainless-Steel-Exhaust-System-RACE-VERSION-01-ikz Milltek Audi R8 V10 Spyder Stainless Steel Exhaust System RACE VERSION
    Milltek Audi R8 V10 Spyder Stainless Steel Exhaust System RACE VERSION
    Milltek Audi R8 V10 Spyder Stainless Steel Exhaust System RACE VERSION

    Milltek Audi R8 V10 Spyder Stainless Steel Exhaust System RACE VERSION
    Milltek Audi R8 V10 Spyder Stainless Steel Exhaust System RACE VERSION. Covered 1500 miles on my 2011 Gen 1 V10 R8. Sounds great with no modifications needed. Cash on collection prefered. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “c_r_motorsport” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Brand: Milltek Sport
    • Type: cat back exhaust system
    • Part Manufacturer: Milltek

    Milltek Audi R8 V10 Spyder Stainless Steel Exhaust System RACE VERSION

    Tags: , , , , , , , ,

« Previous Entries