WP_Cloudy

Section

Archive

November 2022
M T W T F S S
« Oct    
 123456
78910111213
14151617181920
21222324252627
282930  
  • series Comments Off
    BMW-4-Series-M4-Milltek-Sport-Race-GPF-OPF-Cat-Back-Exhaust-Carbon-Jet-90-01-zbr BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Carbon Jet-90

    BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Carbon Jet-90
    Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Carbon Jet-90. BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust System Carbon Jet-90 Trims. Genuine Brand New Milltek Sport GPF/OPF Cat Back Exhaust System. Milltek Sport GPF/OPF Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXBM1121 Cat Back Exhaust System. MSBM312: Centre Section (Race). MSBM269: Rear Silencer Connecting Pipe Left Hand. MSBM270: Rear Silencer Connecting Pipe Right Hand. MSBM256: Rear Silencer {Requires the valve motors from the OE exhaust system}. MSTIP225 x4: Carbon Jet-90 Trims. Pipe Diameter: 2.76-inch (70.00mm). Fits: BMW 4 Series F82/83 M4 Coupe/Convertible & M4 Competition CoupĂ© (OPF/GPF equipped models only) 2019 and Later. Pictures for illustration purposes. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Genuine OEM and Performance Parts. We care that items arrive safely, our aim is quality over quanity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. These charges are the buyers responsibility. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such behavior. The home of OEM and performance parts for VW Audi Seat Skoda and now we merge Ford, BMW, Vauxhall and many more parts into the shop. You can see Part Werx legacy feedback via the old part werx profile. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Type: Cat Back Exhaust Kit
    • Features: 100% Accuracy of Fit, Easy to Replace, Cat Back
    • Items Included: Muffler, Clamp, Pipe, Tip
    • Placement on Vehicle: Rear Bumper, Rear, Lower
    • Manufacturer Part Number: SSXBM1121
    • Material: Stainless Steel
    • Classic Part: No
    • Country/Region of Manufacture: United Kingdom
    • Performance Part: Yes
    • Universal Fitment: No
    • Mounting Style: Clamp-On
    • Manufacturer Warranty: Lifetime

    BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Carbon Jet-90

    Tags: , , , , , , , ,

  • series Comments Off
    BMW-4-Series-M4-Milltek-Sport-Race-GPF-OPF-Cat-Back-Exhaust-Cerakote-Black-GT90-01-uden BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Cerakote Black GT90

    BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Cerakote Black GT90
    Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Cerakote Black GT90. BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust System Cerakote Black GT-90 Trims. Genuine Brand New Milltek Sport GPF/OPF Cat Back Exhaust System. Milltek Sport GPF/OPF Cat Back Exhaust System. Cerakote Black GT-90 Trims. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXBM1118 Cat Back Exhaust System. MSBM312: Centre Section (Race). MSBM269: Rear Silencer Connecting Pipe Left Hand. MSBM270: Rear Silencer Connecting Pipe Right Hand. MSBM256: Rear Silencer {Requires the valve motors from the OE exhaust system}. MSAU532 x4: Cerakote Black Tip Assembly. Pipe Diameter: 2.76-inch (70.00mm) Tip Style: Quad 90mm GT90. Fits: BMW 4 Series F82/83 M4 Coupe/Convertible & M4 Competition CoupĂ© (OPF/GPF equipped models only) 2019 and Later. Pictures for illustration purposes. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Genuine OEM and Performance Parts. We care that items arrive safely, our aim is quality over quanity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. These charges are the buyers responsibility. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such behavior. The home of OEM and performance parts for VW Audi Seat Skoda and now we merge Ford, BMW, Vauxhall and many more parts into the shop. You can see Part Werx legacy feedback via the old part werx profile. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Type: Cat Back Exhaust Kit
    • Features: 100% Accuracy of Fit, Easy to Replace, Cat Back
    • Items Included: Muffler, Clamp, Pipe, Tip
    • Placement on Vehicle: Rear Bumper, Rear, Lower
    • Manufacturer Part Number: SSXBM1118
    • Material: Stainless Steel
    • Classic Part: No
    • Country/Region of Manufacture: United Kingdom
    • Performance Part: Yes
    • Universal Fitment: No
    • Mounting Style: Clamp-On
    • Manufacturer Warranty: Lifetime

    BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Cerakote Black GT90

    Tags: , , , , , , , , ,

  • series Comments Off
    BMW-1-Series-M135i-F20-F21-Milltek-Sport-Race-Cat-Back-Exhaust-Titanium-Tips-01-swag BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Titanium Tips
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Titanium Tips
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Titanium Tips
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Titanium Tips
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Titanium Tips

    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Titanium Tips
    Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Titanium Tips. BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust System Titanium Tips. Genuine Brand New Milltek Sport Race Cat Back Exhaust System. Milltek Sport Race Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXBM1024 Cat Back Exhaust System. MSBM219: Flexible Connecting Pipe. MSBM220: Centre Connecting Pipe. MSBM221: Rear Silencer Connecting Pipe. MSBM223: Rear Silencer – Race. MSBM224 x2: Rear Silencer Connecting Pipes. MSTIP193 x2: Titanium Tip Assembly. Pipe Diameter: 3.00? (76.20mm) Tip Style: Twin 90mm GT90. Fits: BMW 1 Series M 135i 3 & 5 door (F21 & F20) 2012 and later. Pictures for illustration purposes only. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine OEM and Performance Parts. We care that items arrive safely, our aim is quality over quanity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. These charges are the buyers responsibility. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such behavior. The home of OEM and performance parts for VW Audi Seat Skoda and now we merge Ford, BMW, Vauxhall and many more parts into the shop. You can see Part Werx legacy feedback via the old part werx profile. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Type: Cat Back Exhaust Kit
    • Features: 100% Accuracy of Fit, Easy to Replace, Cat Back
    • Items Included: Muffler, Clamp, Pipe, Tip
    • Placement on Vehicle: Rear Bumper, Rear, Lower
    • Manufacturer Part Number: SSXBM1024
    • Material: Stainless Steel
    • Classic Part: No
    • Country/Region of Manufacture: United Kingdom
    • Performance Part: Yes
    • Universal Fitment: No
    • Mounting Style: Clamp-On
    • Manufacturer Warranty: Lifetime

    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Titanium Tips

    Tags: , , , , , , , ,

  • mustang Comments Off
    2015-2017-Mustang-Gt-Magnaflow-Exhaust-Sound-Clip-Race-Series-Axle-Back-Review-U0026-Install-01-vv

    Tags: , , , , , , , , , , ,

  • mustang Comments Off
    2018-2022-Mustang-Install-Mbrp-Black-Series-Cat-Back-Exhaust-01-rut

    Tags: , , , , , ,

  • series Comments Off
    BMW-2-Series-M240i-F22-Milltek-Race-Cat-Back-Non-Res-Exhaust-Burnt-Titanium-GT90-01-qhc BMW 2 Series M240i F22 Milltek Race Cat Back Non Res Exhaust Burnt Titanium GT90

    BMW 2 Series M240i F22 Milltek Race Cat Back Non Res Exhaust Burnt Titanium GT90
    BMW 2 Series M240i F22 Milltek Sport Race Cat Back Non Resonated Exhaust Burnt Titanium GT90 Tips. Genuine Brand New Milltek Sport Race Cat Back Non Resonated Exhaust System. Milltek Sport Race Cat Back Non Resonated Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. 2x Burnt Titanium GT90 Tail Pipes. Louder – This is a non resonated system, louder than resonated. If you want the quieter resonated system please see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in System SSXBM1059. MSBM275: Front Connecting Pipe. MSBM276: Centre Connecting Pipe. MSBM246: Rear Silencer Assembly (Race). MSBM247: Outlet Pipe (With Electronic Valve Base)(Requires The Electronic Valve Motor From The OEM BMW System). MSBM279: Left Hand Mounting Bracket. MSBM280: Right Hand Mounting Bracket. MSTIP217 x2: 90mm Burnt Titanium GT90 Tips/Trims. Pipe Diameter: 2.62 inch (66.5mm). Fits: BMW 2 Series M240i Coupe (F22 LCI- Non-OPF equipped models only) 2015 to 2018. Please see our shop for 1000s more Performance and Genuine OEM Parts. You can see Part Werx legacy feedback via the old part werx profile. Made with in Great Britain. Template Managed & Developed by Dev VIP. 30-06-2019 16:06:19. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Manufacturer Part Number: SSXBM1059
    • Country/Region of Manufacture: United Kingdom
    • Brand: Milltek Sport

    BMW 2 Series M240i F22 Milltek Race Cat Back Non Res Exhaust Burnt Titanium GT90

    Tags: , , , , , , , ,

  • magnaflow Comments Off
    Magnaflow-Axle-Back-Race-Series-2019-Chevy-Camaro-1lt-V6-Camaro-Magnaflow-01-xxl

    Tags: , , , , , ,

  • milltek Comments Off
    Milltek-BMW-M135i-Cat-Back-Exhaust-1-Series-3-5-Door-F21-F20-RACE-Ti-SSXBM1024-01-ivji Milltek BMW M135i Cat Back Exhaust 1 Series 3&5 Door F21 F20 RACE Ti SSXBM1024
    Milltek BMW M135i Cat Back Exhaust 1 Series 3&5 Door F21 F20 RACE Ti SSXBM1024
    Milltek BMW M135i Cat Back Exhaust 1 Series 3&5 Door F21 F20 RACE Ti SSXBM1024
    Milltek BMW M135i Cat Back Exhaust 1 Series 3&5 Door F21 F20 RACE Ti SSXBM1024
    Milltek BMW M135i Cat Back Exhaust 1 Series 3&5 Door F21 F20 RACE Ti SSXBM1024
    Milltek BMW M135i Cat Back Exhaust 1 Series 3&5 Door F21 F20 RACE Ti SSXBM1024

    Milltek BMW M135i Cat Back Exhaust 1 Series 3&5 Door F21 F20 RACE Ti SSXBM1024
    BRAND NEW MILLTEK STAINLESS STEEL RACE CAT BACK EXHAUST SYSTEM TO FIT BMW 1 SERIES M135I 3 & 5 DOOR (F21 & F20) 2012 ON. BMW 1 Series M135i 3 & 5 Door (F21 & F20) 2012 on. Milltek 3 Race Cat Back Exhaust System – Titanium Tips SSXBM1024. The latest F20 chassis car features BMW’s impressive twin scroll turbo engine and is the ideal recipient powerplant for Milltek’s class-leading extraction technology and craftsmanship. Many people have heralded the new 1-series as the spiritual successor to the original E30 series, in terms of its well-balanced RWD drivetrain and compact packaging. The new Milltek system picks up the baton from BMW’s engineers and endows the capable car with tangible gains in power, torque and sound quality! Initially, the system will be launched as a cat-back only set-up, with the additional option of a turbo-back system, complete with large bore downpipe and high-flow cat configurations. All terminate in a smart dual outlet, with options of polished or black GT-90 trims. There are two different cat-back systems on offer, Race, and EC-Approved. The Race option features minimal internals in the rear silencer for a sonorous exhaust note without droning – perfect for those who want to use their car on the road or on the race track. When designing the system, Milltek’s engineers took the unusual step of marginally reducing the OEM’s systems 80mm diameter down to 76mm. This was because the factory system is actually squashed in a number of places to allow clearance for underbody components, whereas the 76mm design can run unfettered from front to back, improving gas-speeds – and therefore performance – overall. As usual, Milltek has fabricated the entire system in its Ilkeston factory from the very highest 304 grade of non-magnetic stainless steel, ensuring a long and effective fitment. Sound quality is carefully tuned to give a powerful growl under heavy throttle loads, but factory-esque noise levels under cruising and town driving. The very best of both worlds! A Brand New Milltek Stainless Steel. 3 Cat Back System. M135i 3 & 5 Door (F21 & F20). Rear Silencer Connecting Pipe. Rear Silencer – Race. Rear Silencer Connecting Pipes. Titanium Tip Assembly Twin 90mm GT90. Titanium Tip Assembly 90mm GT9. Pipe Diameter Size O. 3.00-inch (76.20mm). The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. Life Time Guarantee For The First Purchaser. A t Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek are the exhaust specialists! Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge – noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW4-KW3, KW5-KW17, PA20-PA38, PA40-PA49. PA60-PA78, PA87 – PA88 PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Intended Use: Modification/ Enhancement
    • Model/ Series: BMW 1 Series M 135i 3 & 5 Door (F21 & F20) 2012 on
    • Part Manufacturer: Milltek
    • Manufacturer Part Number: SSXBM1024
    • Part Manufacturer Number: SSXBM1024
    • Subtype: 3\
    • PIPE DIAMETER OD: 3.00-inch (76.20mm)
    • SYSTEM TYPE: Race Type Exhaust
    • TAILPIPE: Titanium Tip Assembly 2 x 90mm GT90
    • EC APPROVED: No
    • Brand: Milltek

    Milltek BMW M135i Cat Back Exhaust 1 Series 3&5 Door F21 F20 RACE Ti SSXBM1024

    Tags: , , , , , , ,

  • series Comments Off
    BMW-1-Series-M135i-F20-F21-Milltek-Sport-Race-Cat-Back-Exhaust-Ceramic-Black-01-nobm BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Ceramic Black
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Ceramic Black
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Ceramic Black
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Ceramic Black
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Ceramic Black

    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Ceramic Black
    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust System Ceramic Black Tips. Genuine Brand New Milltek Sport Race Cat Back Exhaust System. Milltek Sport Race Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXBM966 Cat Back Exhaust System. MSBM219: Flexible Connecting Pipe. MSBM220: Centre Connecting Pipe. MSBM221: Rear Silencer Connecting Pipe. MSBM223: Rear Silencer – Race. MSBM224 x2: Rear Silencer Connecting Pipes. MSAU532 x2: Cerakote Black Tip Assembly. Pipe Diameter: 3.00? (76.20mm) Tip Style: Twin 90mm GT90. Fits: BMW 1 Series M 135i 3 & 5 door (F21 & F20) 2012 and later. Pictures for illustration purposes only. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine OEM and Performance Parts. You can see Part Werx legacy feedback via the old part werx profile. Made with in Great Britain. Template Managed & Developed by Dev VIP. 30-06-2019 16:06:19. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Manufacturer Part Number: SSXBM966
    • Country/Region of Manufacture: United Kingdom
    • Brand: Milltek Sport

    BMW 1 Series M135i F20 F21 Milltek Sport Race Cat Back Exhaust Ceramic Black

    Tags: , , , , , , , ,

  • series Comments Off
    BMW-2-Series-F22-M235i-Coupe-Milltek-Cat-Back-Race-Exhaust-Twin-Polished-GT90-01-kuv BMW 2 Series F22 M235i Coupe Milltek Cat Back Race Exhaust Twin Polished GT90
    BMW 2 Series F22 M235i Coupe Milltek Cat Back Race Exhaust Twin Polished GT90
    BMW 2 Series F22 M235i Coupe Milltek Cat Back Race Exhaust Twin Polished GT90
    BMW 2 Series F22 M235i Coupe Milltek Cat Back Race Exhaust Twin Polished GT90
    BMW 2 Series F22 M235i Coupe Milltek Cat Back Race Exhaust Twin Polished GT90

    BMW 2 Series F22 M235i Coupe Milltek Cat Back Race Exhaust Twin Polished GT90
    BMW 2 Series F22 M235i Coupe Milltek Sport Cat Back Race Exhaust Twin Polished GT90 Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System. Milltek Sport Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXBM989 System. MSBM219: Flexible Connecting Pipe. MSBM220: Centre Connecting Pipe. MSBM246: Rear Silencer Assembly (Race). MSBM221: Rear Silencer Connecting Pipe. MSBM247: Outlet Pipe (with Electronic Valve Base – Requires the electric valve motor from the OEM BMW system). MSAU529 x2: Polished Tip Assembly. Pipe Diameter: 3.00? (76.20mm) Tip Style: Twin 90mm GT90. Fits: BMW 2 Series F22 M235i Coupe 2014 and later. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Performance and Genuine OEM Parts. You can see Part Werx legacy feedback via the old part werx profile. Made with in Great Britain. Template Managed & Developed by Dev VIP. 30-06-2019 16:06:19. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Manufacturer Part Number: SSXBM989
    • Country/Region of Manufacture: United Kingdom
    • Brand: Milltek Sport

    BMW 2 Series F22 M235i Coupe Milltek Cat Back Race Exhaust Twin Polished GT90

    Tags: , , , , , , , , ,

« Previous Entries