WP_Cloudy

Section

Archive

February 2023
M T W T F S S
« Jan    
 12345
6789101112
13141516171819
20212223242526
2728  

Recent Search

  • milltek Comments Off
    Milltek-Non-Resonated-Non-Valved-Cat-Back-Race-Exhaust-for-Golf-MK7-R-2-0-300PS-01-mre Milltek Non Resonated Non Valved Cat Back Race Exhaust for Golf MK7 R 2.0 300PS

    Milltek Non Resonated Non Valved Cat Back Race Exhaust for Golf MK7 R 2.0 300PS
    Milltek Non Resonated Non Valved Cat Back Race Exhaust for Golf MK7 R 2.0 300PS. MSAU618REP: Centre Silencer Delete Pipe. MSVW441: Rear Silencer (non-valved). MSVW372: 4 x Cerakote Black Quad 100mm GT100 Round Trims. Milltek Catback Exhaust Systems are a replacement for your stock exhaust system running from the primary catalytic converter back. By partially replacing your OE exhaust system you will enjoy noticeable power gains, Milltek’s signature sound designed to be sporty but not intrusive, and some of the best looking stainless steel exhaust systems around. Milltek have 30 years of continuous ongoing experience of exhaust development. They use only the highest grade T304 Stainless Steel in their exhausts. This is a very hard wearing alloy with a high chromium content offering superb corrosion resistance. It is also evident in the design of Milltek’s exhaust systems. Unlike systems merely designed to be loud Milltek optimise their systems for minimum back pressure and maximum flow-rate. The more exhaust gas you get out of your engine the more air you can get in which in turn leads to power gains as the engine breathes more freely. You will also enjoy performance gains from the reduced weight of these systems against the stock systems. Milltek understand that the grown up motoring enthusiast might not want to wake up the neighbours or listen to a droning exhaust note on long motorway journeys so they offer a choice of resonated and non-resonated systems. Resonated systems come with a special resonator chamber designed to cancel out certain frequencies and so are quieter. Non-resonated systems are a little louder but offer the best power gains and are still engineered not to be excessively loud. Milltek’s slogan is’Performance to blow your mind, not your ears! As these systems run from primary catalyst back they may replace secondary catalytic converters where present. The vehicle should still be able to pass MOT emissions testing without the secondary cats which are generally only present for extra emissions control on cold-start. PLEASE NOTE: Picture For Illustration Purposes Only. While we have endeavoured to have an exact picture of every product this hasn’t always been possible so some products may differ from what is pictured. 29.01.2023, 07:05:53. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone, fax and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. OVERSEAS DELIVERIES: We can send items anywhere in the world! We work hard to bring you the most competitive pricing available and we won’t stop there. If you have seen the same product elsewhere for less, let us know and we’ll endeavour to match the price. Printed evidence of offer may be required; our staff will verify the offer. The competitor’s price must be available to all customers and exclude any personal discounts. We will only price match on like for like purchasing routes i. This price promise cannot be used in conjunction with any offer or discount. This price promise is undertaken in good faith and within the bounds of the law; it can be withdrawn at any time without notice. Final decision on the validity of a price promise request will rest with Demon Tweeks. For the sizing guide. Oil, Fluid & Liquid Shop. Demon Tweeks, 75 Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG, United Kingdom. GB 840 2501 70. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “demontweeksdirect” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Manufacturer: Milltek
    • Brand: Milltek
    • MPN: MSVW441 / msvw372 / MSAU618REP
    • Manufacturer Part Number: SSXVW407
    • NOTE: Quad Cerakote Black 100mm GT100 Tailpipes

    Milltek Non Resonated Non Valved Cat Back Race Exhaust for Golf MK7 R 2.0 300PS

    Tags: , , , , , , ,

  • milltek Comments Off
    Milltek-VW-Golf-Mk6-R-2-0-TFSI-4-Motion-Resonated-Race-Cat-Back-Exhaust-SSXVW222-01-sbwe Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW222

    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW222
    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW222. Tip style: GT100 100mm Titanium Tips. Pipe diameter (mm): 76.2. Pipe diameter (Inches): 3. Founded in 1983 by a true car enthusiast, we have grown to become one of the leading manufacturers of performance exhaust systems for a continually growing range of vehicles. With headquarters in the UK and a development & testing centre at the iconic Nürburgring, Germany; we design, develop and test our range of exhaust systems in-house using state of the art equipment, such as the latest All Electrical CNC Mandrel Tube Benders and Faro 3D Laser Scanners, which combined with one of the most experienced teams of Engineers and Production Staff in the industry, allows us to continue to be the first to deliver market products and innovative designs. Everything we design and produce is only ever made to one quality – and that has to be good enough for the most demanding of customers, our race teams! To fully understand the demands and expectations of the demands and expectations of the motorsport industry, we have over the years fully immersed ourselves within motorsport, and competed in some of the most gruelling races and championships in Europe. We have developed vehicles and exhaust systems for Milltek Sport Racing to compete with in series inclusive of the British Touring Car Championship, the Volkswagen Cup, Time Attack, VLN and N24. Through our own experiences we have been able to come to understand how to manufacture to the exacting tolerances and peerless quality that the world’s leading motorsport teams and manufacturers require. For the past few seasons we have supported race series that we no longer directly participate in by becoming Technical Partners to a number of competing teams, and working closely with them to develop new products in order to continue the evolution of our motorsport understandings. For a number of seasons now we have been Technical Partners to Power Maxed Racing and BMR in the BTCC, which allows us to not only evolve our own understandings but also our motorsport products to the ever-changing requirements of the industry. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gr_technik” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French Guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Bahamas, Colombia, Jamaica, Kuwait, Panama, Philippines, Qatar, Vietnam.
    • Brand: Milltek
    • Manufacturer Part Number: SSXVW222
    • EAN: DoesNotApply

    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW222

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-VW-Golf-Mk6-R-2-0-TFSI-4-Motion-Resonated-Race-Cat-Back-Exhaust-SSXVW221-01-mtp Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW221

    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW221
    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW221. Tip style: GT100 100mm Polished Tips. Pipe diameter (mm): 76.2. Pipe diameter (Inches): 3. Founded in 1983 by a true car enthusiast, we have grown to become one of the leading manufacturers of performance exhaust systems for a continually growing range of vehicles. With headquarters in the UK and a development & testing centre at the iconic Nürburgring, Germany; we design, develop and test our range of exhaust systems in-house using state of the art equipment, such as the latest All Electrical CNC Mandrel Tube Benders and Faro 3D Laser Scanners, which combined with one of the most experienced teams of Engineers and Production Staff in the industry, allows us to continue to be the first to deliver market products and innovative designs. Everything we design and produce is only ever made to one quality – and that has to be good enough for the most demanding of customers, our race teams! To fully understand the demands and expectations of the demands and expectations of the motorsport industry, we have over the years fully immersed ourselves within motorsport, and competed in some of the most gruelling races and championships in Europe. We have developed vehicles and exhaust systems for Milltek Sport Racing to compete with in series inclusive of the British Touring Car Championship, the Volkswagen Cup, Time Attack, VLN and N24. Through our own experiences we have been able to come to understand how to manufacture to the exacting tolerances and peerless quality that the world’s leading motorsport teams and manufacturers require. For the past few seasons we have supported race series that we no longer directly participate in by becoming Technical Partners to a number of competing teams, and working closely with them to develop new products in order to continue the evolution of our motorsport understandings. For a number of seasons now we have been Technical Partners to Power Maxed Racing and BMR in the BTCC, which allows us to not only evolve our own understandings but also our motorsport products to the ever-changing requirements of the industry. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gr_technik” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French Guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Bahamas, Colombia, Jamaica, Kuwait, Panama, Philippines, Qatar, Vietnam.
    • Brand: Milltek
    • Manufacturer Part Number: SSXVW221
    • EAN: DoesNotApply

    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW221

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-VW-Golf-Mk6-R-2-0-TFSI-4-Motion-Resonated-Race-Cat-Back-Exhaust-SSXVW220-01-woxi Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW220

    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW220
    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW220. Tip style: GT100 100mm Cerakote Black Tips. Pipe diameter (mm): 76.2. Pipe diameter (Inches): 3. Founded in 1983 by a true car enthusiast, we have grown to become one of the leading manufacturers of performance exhaust systems for a continually growing range of vehicles. With headquarters in the UK and a development & testing centre at the iconic Nürburgring, Germany; we design, develop and test our range of exhaust systems in-house using state of the art equipment, such as the latest All Electrical CNC Mandrel Tube Benders and Faro 3D Laser Scanners, which combined with one of the most experienced teams of Engineers and Production Staff in the industry, allows us to continue to be the first to deliver market products and innovative designs. Everything we design and produce is only ever made to one quality – and that has to be good enough for the most demanding of customers, our race teams! To fully understand the demands and expectations of the demands and expectations of the motorsport industry, we have over the years fully immersed ourselves within motorsport, and competed in some of the most gruelling races and championships in Europe. We have developed vehicles and exhaust systems for Milltek Sport Racing to compete with in series inclusive of the British Touring Car Championship, the Volkswagen Cup, Time Attack, VLN and N24. Through our own experiences we have been able to come to understand how to manufacture to the exacting tolerances and peerless quality that the world’s leading motorsport teams and manufacturers require. For the past few seasons we have supported race series that we no longer directly participate in by becoming Technical Partners to a number of competing teams, and working closely with them to develop new products in order to continue the evolution of our motorsport understandings. For a number of seasons now we have been Technical Partners to Power Maxed Racing and BMR in the BTCC, which allows us to not only evolve our own understandings but also our motorsport products to the ever-changing requirements of the industry. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gr_technik” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French Guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Bahamas, Colombia, Jamaica, Kuwait, Panama, Philippines, Qatar, Vietnam.
    • Brand: Milltek
    • Manufacturer Part Number: SSXVW220
    • EAN: DoesNotApply

    Milltek VW Golf Mk6 R 2.0 TFSI 4 Motion Resonated Race Cat Back Exhaust SSXVW220

    Tags: , , , , , , , ,

  • scorpion Comments Off
    Scorpion-Exhaust-Fiesta-ST150-Resonated-Cat-Back-System-Fexi-Pipe-RACE-Pipe-01-dh Scorpion Exhaust Fiesta ST150 Resonated Cat Back System, Fexi Pipe & RACE Pipe
    Scorpion Exhaust Fiesta ST150 Resonated Cat Back System, Fexi Pipe & RACE Pipe
    Scorpion Exhaust Fiesta ST150 Resonated Cat Back System, Fexi Pipe & RACE Pipe
    Scorpion Exhaust Fiesta ST150 Resonated Cat Back System, Fexi Pipe & RACE Pipe
    Scorpion Exhaust Fiesta ST150 Resonated Cat Back System, Fexi Pipe & RACE Pipe

    Scorpion Exhaust Fiesta ST150 Resonated Cat Back System, Fexi Pipe & RACE Pipe
    BRAND NEW SCORPION EXHAUST SYSTEM TO FIT FIESTA ST150. A Brand New Scorpion Flexi Pipe, RACE Cat Replacement Pipe. Resonated Cat Back System. Not For Road Use. (A Stage 2 ECU Re-Map is Required). Ford Fiesta MK6 ST150. 2.5 / 63.5mm. SFDP068 – Flexi Pipe. SFDC068 – RACE Cat Replacement Pipe. SFD068 – Cat Back Resonated System. 4 / 100mm Polished Daytona Trim. The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. Life Time Guarantee For The First Purchaser! At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW4, KW5-KW17, PA20-PA38, PA40-PA49. PA60-PA78, PA87 – PA88, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Part Manufacturer: Scorpion
    • Manufacturer: Ford
    • Model/ Series: Fiesta ST 150 MK6 2004 – 2008
    • Manufacturer Part Number: SFD068 SFDP068 SFDC068
    • Intended Use: Modification/ Enhancement
    • PIPE DIAMETER SIZE OD: 2.5\
    • MATERIAL: Stainless Steel
    • FITTING KIT: Yes – Appropriate fitting kit supplied
    • EC APPROVED: NO
    • Brand: Scorpion

    Scorpion Exhaust Fiesta ST150 Resonated Cat Back System, Fexi Pipe & RACE Pipe

    Tags: , , , , , , , , ,

  • subaru Comments Off
    Subaru-Impreza-Turbo-Cat-Back-Cobra-Sport-Exhaust-Race-type-Resonated-SB02z-01-fp Subaru Impreza Turbo Cat Back Cobra Sport Exhaust (Race type Resonated) SB02z
    Subaru Impreza Turbo Cat Back Cobra Sport Exhaust (Race type Resonated) SB02z
    Subaru Impreza Turbo Cat Back Cobra Sport Exhaust (Race type Resonated) SB02z
    Subaru Impreza Turbo Cat Back Cobra Sport Exhaust (Race type Resonated) SB02z

    Subaru Impreza Turbo Cat Back Cobra Sport Exhaust (Race type Resonated) SB02z
    Subaru Impreza Turbo Cat Back Cobra Sport Exhaust (Race type – Resonated) SB02z. Fits – Subaru Impreza WRX / STI Performance Exhaust 2.0L & 2.5L Turbo Year – 01-07 Parts – Cat Back System (Race type – Resonated) Part Code – SB02z Bore Size – 3/76.19mm Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Subaru Impreza performance exhaust is made in 3/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. This resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version (excluding the centre silencer) which is a louder option. All relevant fittings and gaskets are supplied. Please Note- Fitted images show non-resonated 2.5 bore version. Fitting Kit Included – This item includes all sleeves and clamps so you can simply bolt this to your car. Please Read Before Purchasing: The picture shown on this listing is a Cobra Sport stock image. Actual parts may vary slightly in design (pipework is Satin polished not mirror polished as the stock image may show). (Some of the fitted images may show alternative part options). All exhausts are direct fit replacement which have the same connection designs as your old exhaust. Tailpipe styles offered fit direct to the bodywork without modifications (unless specified). Please do not book in your vehicle for any related exhaust work or fitting until you have received and checked your full order. (Excluding Scottish Highlands, Northern Ireland and other offshore or remote areas). For further information please see our terms & conditions. This does not in any way affect your statutory rights. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “jpexhausts-uk” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Manufacturer Part Number: SB02z
    • Brand: Cobra Sport
    • MPN: SB02z

    Subaru Impreza Turbo Cat Back Cobra Sport Exhaust (Race type Resonated) SB02z

    Tags: , , , , , , , , , ,

  • milltek Comments Off
    Milltek-MK7-Golf-R-Cat-Back-Exhaust-System-Resonated-Race-Black-Oval-SSXVW309-01-jye Milltek MK7 Golf R Cat Back Exhaust System Resonated Race Black Oval SSXVW309

    Milltek MK7 Golf R Cat Back Exhaust System Resonated Race Black Oval SSXVW309
    Price Shown is at least 10% off the RRP. Volkswagen Golf MK7 R 2.0 TSI 300PS 2014 to 2016. Cerakote Black Oval Tips. MSVW441: Rear Silencer (non-valved). MSTIP160 x4: Cerakote Black Velvet Oval Tips. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Interchange Part Number: SSXVW309
    • Manufacturer Part Number: SSXVW309
    • Other Part Number: SSXVW309
    • Brand: Milltek Sport
    • Type: cat back exhaust system
    • Part Manufacturer: Milltek

    Milltek MK7 Golf R Cat Back Exhaust System Resonated Race Black Oval SSXVW309

    Tags: , , , , , , , , ,

  • cobra Comments Off
    Cobra-Exhaust-For-Cupra-Formentor-2-0-TSI-Resonated-Race-GPF-Back-SE77TP80-BLK-01-tkg Cobra Exhaust For Cupra Formentor 2.0 TSI Resonated Race GPF Back SE77TP80-BLK

    Cobra Exhaust For Cupra Formentor 2.0 TSI Resonated Race GPF Back SE77TP80-BLK
    For BMW m440i Cobra Sport GPF Back Exhaust BM154TP108-CF. System – GPF Back Exhaust. Vehicle – BMW m440i. Tailpipe – TP108-CF (Carbon Fibre). Specifics – Twin Valved. This exhaust removes the factory exhaust outlets and replaces them with a choice of quad exit exhaust tailpipes. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M440i (G22) performance exhaust is made in 3/76.2mm pipework and fits from the GPF section backwards (GPF-back), this exhaust replaces the centre and rear sections. Single Valved GPF Back Test Results – Sport mode. Twin Valved GPF Back Test Results – Sport mode. This exhaust removes the factory exhaust outlets and replaces them with a choice of quad exit exhaust tailpipes enhancing the styling of the rear of the car. This setup is available in two options. The twin valved setup includes an intricately designed larger rear silencer to fully utilise the M440i’s built in drive modes, allowing the exhaust to change from quieter cruising tones in comfort mode to much louder tones in sport mode. The single valved setup includes a smaller and louder’race’ style rear silencer for a larger upgrade in overall sound in all drive modes. This setup offers improved sound and louder tones in all drive modes. All relevant fittings and gaskets are supplied. For an accurate lead time please feel free to message us. Any Items that are out of stock or have EXTENDED Lead Times, May Take Slightly Longer than Normal. Consistent Quality and Customer Service. Be confident you will get what you ordered; and if by chance a problem occurs we fix the issue very fast w/ no quibbles! Know it will be easy to return. We use high quality bubble lined jiffy bags for all small order to ensure a damage free transit & High Quality Double Walled Boxes for the heavier & larger items. All UK Orders are Sent Via 1st class service or 24 hour courier, All orders are fully insured. Posted w/in 24 hours unless advert dispatch time or description states otherwise. Orders before 3pm are usually sent same day. International Orders are sent Via DHL EXPRESS. All tracking will be added to the order details as soon as it is obtained. Tracking numbers automatically attach to every order once dispatched. Problems should they occur. If you think there is anything we can do to improve our services or product we would love to hear from you- Seriously we can only improve if we have input from our customers. We are always happy to help. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “shopbhp” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Brand: Cobra Sport
    • Manufacturer Part Number: SE77TP80-BLK

    Cobra Exhaust For Cupra Formentor 2.0 TSI Resonated Race GPF Back SE77TP80-BLK

    Tags: , , , , , , ,

  • cobra Comments Off
    Cobra-Exhaust-For-Cupra-Formentor-2-0-TSI-Resonated-Race-GPF-Back-SE81TP115-CF-01-bb Cobra Exhaust For Cupra Formentor 2.0 TSI Resonated Race GPF Back SE81TP115-CF

    Cobra Exhaust For Cupra Formentor 2.0 TSI Resonated Race GPF Back SE81TP115-CF
    For BMW m440i Cobra Sport GPF Back Exhaust BM154TP108-CF. System – GPF Back Exhaust. Vehicle – BMW m440i. Tailpipe – TP108-CF (Carbon Fibre). Specifics – Twin Valved. This exhaust removes the factory exhaust outlets and replaces them with a choice of quad exit exhaust tailpipes. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M440i (G22) performance exhaust is made in 3/76.2mm pipework and fits from the GPF section backwards (GPF-back), this exhaust replaces the centre and rear sections. Single Valved GPF Back Test Results – Sport mode. Twin Valved GPF Back Test Results – Sport mode. This exhaust removes the factory exhaust outlets and replaces them with a choice of quad exit exhaust tailpipes enhancing the styling of the rear of the car. This setup is available in two options. The twin valved setup includes an intricately designed larger rear silencer to fully utilise the M440i’s built in drive modes, allowing the exhaust to change from quieter cruising tones in comfort mode to much louder tones in sport mode. The single valved setup includes a smaller and louder’race’ style rear silencer for a larger upgrade in overall sound in all drive modes. This setup offers improved sound and louder tones in all drive modes. All relevant fittings and gaskets are supplied. For an accurate lead time please feel free to message us. Any Items that are out of stock or have EXTENDED Lead Times, May Take Slightly Longer than Normal. Consistent Quality and Customer Service. Be confident you will get what you ordered; and if by chance a problem occurs we fix the issue very fast w/ no quibbles! Know it will be easy to return. We use high quality bubble lined jiffy bags for all small order to ensure a damage free transit & High Quality Double Walled Boxes for the heavier & larger items. All UK Orders are Sent Via 1st class service or 24 hour courier, All orders are fully insured. Posted w/in 24 hours unless advert dispatch time or description states otherwise. Orders before 3pm are usually sent same day. International Orders are sent Via DHL EXPRESS. All tracking will be added to the order details as soon as it is obtained. Tracking numbers automatically attach to every order once dispatched. Problems should they occur. If you think there is anything we can do to improve our services or product we would love to hear from you- Seriously we can only improve if we have input from our customers. We are always happy to help. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “shopbhp” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Brand: Cobra Sport
    • Manufacturer Part Number: SE81TP115-CF

    Cobra Exhaust For Cupra Formentor 2.0 TSI Resonated Race GPF Back SE81TP115-CF

    Tags: , , , , , , ,

  • citroen Comments Off
    For-Citroen-DS3-Racing-1-6-T-Resonated-cat-back-system-Scorpion-Exhaust-01-nzkg For Citroen DS3 Racing & 1.6 T Resonated cat-back system Scorpion Exhaust
    For Citroen DS3 Racing & 1.6 T Resonated cat-back system Scorpion Exhaust
    For Citroen DS3 Racing & 1.6 T Resonated cat-back system Scorpion Exhaust

    For Citroen DS3 Racing & 1.6 T Resonated cat-back system Scorpion Exhaust
    Citroen DS3 Racing & 1.6 T Resonated cat-back system Scorpion Exhaust. System – Resonated cat-back system. Vehicle – Citroen DS3 Racing & 1.6 T. Year – 2011 – 2015. Fits To – OEM / Scorpion. Tailpipe Diameter – 76mm. Notes – Engine management light may be activated, Stage 2 ECU remap recommended. All pictures are stock images. For an accurate lead time please feel free to message us. Any Items that are out of stock or have EXTENDED Lead Times, May Take Slightly Longer than Normal. Consistent Quality and Customer Service. Be confident you will get what you ordered; and if by chance a problem occurs we fix the issue very fast w/ no quibbles! Know it will be easy to return. We use high quality bubble lined jiffy bags for all small order to ensure a damage free transit & High Quality Double Walled Boxes for the heavier & larger items. All UK Orders are Sent Via 1st class service or 24 hour courier, All orders are fully insured. Posted w/in 24 hours unless advert dispatch time or description states otherwise. Orders before 3pm are usually sent same day. International Orders are sent Via DHL EXPRESS. All tracking will be added to the order details as soon as it is obtained. Tracking numbers automatically attach to every order once dispatched. Problems should they occur. If you think there is anything we can do to improve our services or product we would love to hear from you- Seriously we can only improve if we have input from our customers. We are always happy to help. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “bhpshop” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Scorpion Exhaust
    • Manufacturer Part Number: SCN014

    For Citroen DS3 Racing & 1.6 T Resonated cat-back system Scorpion Exhaust

    Tags: , , , , , ,

« Previous Entries