WP_Cloudy

Section

Archive

November 2022
M T W T F S S
« Oct    
 123456
78910111213
14151617181920
21222324252627
282930  
  • milltek Comments Off
    Milltek-Res-3in-R-Style-Cat-Back-Race-Exhaust-System-Suits-VW-Golf-MK6-GTI-01-lmpo Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI

    Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI
    Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI. A Milltek Catback Exhaust System replaces the rear half of your exhaust from the catalytic converter back. This gives you the best of both worlds, improved sound and looks, but no worries about legality. Replacing stock pipework with wider, better designed Milltek pipework releases more performance from your cars engine. A new Milltek backbox and silencers will give your car a sporty, but refined sound. Sporty but refined sound. Lightweight and durable stainless steel. Outstanding fit and quality. A Cat-back exhaust hooks up to your factory system behind the main cat, replacing the pipework, silencers, and back-boxes with new Milltek kit. Millteks pipework will be carefully computer designed to increase flow-rate with wider pipework and carefully designed mandrel bends. This means your engine can breathe more freely and means getting the exhaust gasses out is not limiting how quickly it can get air in. A badly designed exhaust can actually reduce torque low down the rev range, but Milltek have the depth of engineering know-how necessary to increase top-end without loss of drivability. Genuine power increases are often achievable with just the exhaust, but it gets really good when the exhaust is paired up with new software and other breathing mods for the engine. Milltek use either hard-wearing T304 Stainless Steel or Titanium. Both are durable and sound great. Milltek put a lot of work into engineering the sound of the exhaust. Anyone can make a car louder. Milltek carefully tune the silencers in the system to offer a sporty, but refined sound. The exhaust is designed to sound fierce when you drive the car hard, but not to drone at idle or when cruising. On some systems there will be a choice of “resonated” or “non-resonated”. Resonated typically have either extra or quieter silencers in place and will be quieter. Milltek take fit and build quality very seriously. Any of their exhausts should just fit directly in place of the original equipment. For a great all-round upgrade, that will leave your car road-legal and refined, but increase power and noise a Milltek Cat-Back is easy to recommend. 27.11.2022, 07:05:59. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone, fax and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. OVERSEAS DELIVERIES: We can send items anywhere in the world! We work hard to bring you the most competitive pricing available and we won’t stop there. If you have seen the same product elsewhere for less, let us know and we’ll endeavour to match the price. Printed evidence of offer may be required; our staff will verify the offer. The competitor’s price must be available to all customers and exclude any personal discounts. We will only price match on like for like purchasing routes i. This price promise cannot be used in conjunction with any offer or discount. This price promise is undertaken in good faith and within the bounds of the law; it can be withdrawn at any time without notice. Final decision on the validity of a price promise request will rest with Demon Tweeks. For the sizing guide. Oil, Fluid & Liquid Shop. Demon Tweeks, 75 Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG, United Kingdom. GB 840 2501 70. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “demontweeksdirect” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Bahrain, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Brunei Darussalam, Egypt, Guernsey, Gibraltar, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Oman, Pakistan, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Kuwait, Philippines, Qatar, Vietnam.
    • Manufacturer: Milltek
    • Brand: Milltek
    • MPN: SSXVW243
    • Manufacturer Part Number: SSXVW243
    • NOTE: 2x 100mm Round GT Cerakote Black Tailpipes

    Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI

    Tags: , , , , , , ,

  • milltek Comments Off
    Milltek-3-Race-Cat-Back-Exhaust-System-Volkswagen-Golf-Mk6-GTi-01-qeyo Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi
    Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi

    Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi
    Milltek Sport exhaust systems are manufactured using aircraft grade stainless steel and machined to precision for maximum performance. Lower pressures within the Milltek Sport systems means performance is not restricted, resulting in greater driveability, sharper throttle response and, of course, increased horsepower and torque. On most after market exhaust systems, any power gains come with an unacceptable increase in volume levels. Milltek Sport pride themselves on offering exhaust systems that are engineered for performance rather than noise. Fitting a Milltek Sport exhaust will improve the tone of your engine’s voice, but will do so with a subdued deeper tone. Model: Golf GTi MK6. If you require your parts quickly then please check stock before ordering to avoid any unexpected lead time. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “amber-performance” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Manufacturer Part Number: SSXVW244
    • Classic Car Part: No
    • Brand: Milltek

    Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi

    Tags: , , , , , ,

  • audi Comments Off
    Audi-TT-1-8T-225-quattro-Milltek-3-Race-Non-Res-Cat-Back-Exhaust-Polished-Tips-01-uuas Audi TT 1.8T 225 quattro Milltek 3? Race Non Res Cat Back Exhaust Polished Tips
    Audi TT 1.8T 225 quattro Milltek 3? Race Non Res Cat Back Exhaust Polished Tips

    Audi TT 1.8T 225 quattro Milltek 3? Race Non Res Cat Back Exhaust Polished Tips
    Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi TT 1.8T 225 quattro Milltek 3′ Race Non Res Cat Back Exhaust Polished Tips. Audi TT 1.8T 225 quattro Milltek Sport 3? Race Resonated Cat Back Exhaust System Polished GT100 Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System. Milltek Sport Resonated Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Fits 225 Model Only. Weight Saving: -5.60 kilos. Quieter – (this is a resonated system, quieter than non resonated, if you want the louder non resonated system please see other listing). Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of silencers. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXAU426 System. MSAU610: Rear Silencer Assembly. MSVW373 x2: Polished Tips. Pipe Diameter: 3.00 inch (76.20mm) 1.00 to 1.50 hour(s) to fit. +0.2 for valance fitting on required models {including removing OE system} Tip Style: Dual 100mm GT100. Please note pictures are for illustration purposes only. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Genuine OEM & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Features: 100% Accuracy of Fit
    • Manufacturer Part Number: SSXAU426
    • Material: Stainless Steel
    • Classic Part: No
    • Country/Region of Manufacture: United Kingdom
    • Performance Part: Yes
    • Universal Fitment: No
    • Mounting Style: Clamp-On

    Audi TT 1.8T 225 quattro Milltek 3? Race Non Res Cat Back Exhaust Polished Tips

    Tags: , , , , , , ,

  • scirocco Comments Off
    VW-Scirocco-R-Milltek-3-Race-Turbo-Back-Non-Res-Exhaust-Sport-Cat-Chrome-GT100-01-sz VW Scirocco R Milltek 3 Race Turbo Back Non Res Exhaust Sport Cat Chrome GT100
    VW Scirocco R Milltek 3 Race Turbo Back Non Res Exhaust Sport Cat Chrome GT100

    VW Scirocco R Milltek 3 Race Turbo Back Non Res Exhaust Sport Cat Chrome GT100
    Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Scirocco R Milltek 3 Race Turbo Back Non Res Exhaust Sport Cat Chrome GT100. VW Scirocco MK3 R Milltek Sport 3? Race Turbo Back Non Resonated Exhaust Sport Cat Polished GT100. Genuine Brand New Milltek 3 Race Non Resonated Turbo Back Exhaust System inc Cast Large Bore Downpipe, High Flow Sports Cat and a SuperPro Engine Mount Bush Insert. Milltek Sport Cast Large Bore Downpipe & High Flow Sports Cat. Twin 100mm GT100 Polished Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Sports Cat Is Road Legal + So Will Still Pass An MOT. Louder – this is a non resonated system, Louder than resonated, if you want the quieter resonated system see other listing. Milltek’s Latest Development Now Included – Cast Large Bore Downpipe With 200 cell Race Catalyst. All new downpipes will feature fully CAD designed and optimised casting that is made from 304 stainless steel. The new range will also benefit from improved flow rates due to the superior design as well as better thermal management properties over the traditional downpipe designs previously offered. In-addition all downpipes will now feature “OEM” style soft flexi sections to improve durability and reduce the transfer of unwanted noise, harshness or vibration into the cabin. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXVW152 Turbo Back System. SPF2861-80 or SPF3365-80: SuperPro Lower Engine Mount Insert. MSVAG03: Cast Large Bore Downpipe with 200cell Race Catalyst (Replaces MSAU342SPR). MSVW351: Front Connecting Pipe. MSVW353REP: Non Resonated Rear Silencer Assembly. MSVW354 x2: GT100 Polished Tips. Fits: VW Scirocco R MK3 2009 and later. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine OEM and Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Features: 100% Accuracy of Fit
    • Manufacturer Part Number: SSXVW152
    • Material: Stainless Steel
    • Classic Part: No
    • Country/Region of Manufacture: United Kingdom
    • Performance Part: Yes
    • Universal Fitment: No
    • Mounting Style: Clamp-On
    • Type: Turbo Back inc High Flow Sports Cat

    VW Scirocco R Milltek 3 Race Turbo Back Non Res Exhaust Sport Cat Chrome GT100

    Tags: , , , , , , , ,

  • golf Comments Off
    VW-Golf-MK5-GTI-2-0T-Edition-30-Milltek-Race-Cat-Back-Exhaust-Non-Res-Black-Tips-01-bwxo VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips
    VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips

    VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips
    Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips. VW Golf MK5 GTI 2.0T Edition 30 Milltek Sport 3 Race Cat Back Exhaust Non Resonated Black Tips. Genuine Brand New Milltek 3 Race Non Resonated Cat Back Exhaust System. Milltek Sport Race Non Resonated Cat Back Exhaust System. Twin 80mm GT80 Cerakote Black Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXVW282 Cat Back System. MSVW367: Adaptor to standard OEM downpipe. MSVW352REP: Non-resonated Centre Section. MSVW430: Race Rear Silencer. MSTIP158 x2: Cerakote Black Tips. Pipe Diameter: 3.00-inch (76.20mm). Fits: VW Golf Mk5 GTi 2.0T FSI, GTi Edition 30 2.0T FSi 230PS. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 100’s more Genuine VW & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Features: 100% Accuracy of Fit
    • Manufacturer Part Number: SSXVW282
    • Material: Stainless Steel
    • Classic Part: No
    • Country/Region of Manufacture: United Kingdom
    • Performance Part: Yes
    • Universal Fitment: No
    • Mounting Style: Clamp-On
    • Type: Cat Back Exhaust System

    VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips

    Tags: , , , , , , ,

  • milltek Comments Off
    Milltek-GPF-Back-Race-Non-Resonated-Exhaust-System-For-Audi-RS3-8Y-Sportback-22-01-noex Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22

    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22
    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22- Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware. Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance. Rear Silencers / Axle back systems are designed to directly replace ther OE rear silencer with a freer flowing option, improving sound and aesthetics of the system. Milltek exhausts offers a significant increase in performance and torque due to reduction of back pressure and flow optimization. Less weight and the well-known Milltek sound are additional features, which puts Milltek sport exhausts aside from the rest. MSAU764REP: Centre Silencer Replacement Pipe (80mm Version). MSAU827: Race Rear Silencer. MSAU822: LH Inner Outlet Pipe. MSAU823: RH Inner Outlet Pipe. MSAU824: LH Valved Outlet Pipe. MSAU825: RH Valved Outlet Pipe. Available As Resonated (Quietest), Non-Resonated (Louder), Race (Loudest) – This listing is for the race varient (loudest system). Performance increase, low back pressure. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Perfect shape and fitment. Pipe Diameter is 3.15-inch (80.00mm). Audi RS3 8Y Sportback / Hatchback 2022. OPF/GPF equipped cars only. If there will be any delays in your order you will be informed within 24-48 hours. Distributed By Haz Motorsport. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “haz_motorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Pipe Diameter: 3.15-inch (80.00mm)
    • Product Type: GPF Back Exhaust
    • Manufacturer Part Number: SSXAU975
    • Vehicle Make: Audi
    • Vehicle Model: RS3 8Y 2022- Hatback / Sportback Only
    • Reference OE/OEM Number: SSXAU975, Milltek, Audi RS3 8Y Hatchback / Sportback, Race System
    • Brand: Milltek

    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22

    Tags: , , , , , , ,

  • golf Comments Off
    VW-Golf-MK5-GTI-2-0T-Edition-30-Milltek-Race-Cat-Back-Exhaust-Black-Tips-Res-01-cgvx VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Black Tips Res

    VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Black Tips Res
    Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Black Tips Res. VW Golf MK5 GTI 2.0T Edition 30 Milltek Sport 3 Race Cat Back Exhaust Black Tips Resonated. Genuine Brand New Milltek Sport 3 Race Resonated Cat Back Exhaust System. Milltek Sport Resonated Cat Back Exhaust System. Twin 80mm GT80 Black Cerakote Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Quieter – this is a resonated system, quieter than non resonated, if you want the louder non resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXVW280 Cat Back System. MSVW367: Adaptor to standard OEM downpipe. MSVW352: Resonated Centre Silencer Assembly. MSVW430: Race Rear Silencer. MSTIP158 x2: GT80 Cerakote Black Tips. Pipe Diameter: 3.00-inch (76.20mm). We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine OEM & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Features: 100% Accuracy of Fit
    • Manufacturer Part Number: SSXVW280
    • Material: Stainless Steel
    • Classic Part: No
    • Country/Region of Manufacture: United Kingdom
    • Performance Part: Yes
    • Universal Fitment: No
    • Mounting Style: Clamp-On
    • Type: Cat Back Exhaust System

    VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Black Tips Res

    Tags: , , , , , , ,

  • series Comments Off
    BMW-4-Series-M4-Milltek-Sport-Race-GPF-OPF-Cat-Back-Exhaust-Carbon-Jet-90-01-zbr BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Carbon Jet-90

    BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Carbon Jet-90
    Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Carbon Jet-90. BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust System Carbon Jet-90 Trims. Genuine Brand New Milltek Sport GPF/OPF Cat Back Exhaust System. Milltek Sport GPF/OPF Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXBM1121 Cat Back Exhaust System. MSBM312: Centre Section (Race). MSBM269: Rear Silencer Connecting Pipe Left Hand. MSBM270: Rear Silencer Connecting Pipe Right Hand. MSBM256: Rear Silencer {Requires the valve motors from the OE exhaust system}. MSTIP225 x4: Carbon Jet-90 Trims. Pipe Diameter: 2.76-inch (70.00mm). Fits: BMW 4 Series F82/83 M4 Coupe/Convertible & M4 Competition CoupĂ© (OPF/GPF equipped models only) 2019 and Later. Pictures for illustration purposes. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Genuine OEM and Performance Parts. We care that items arrive safely, our aim is quality over quanity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. These charges are the buyers responsibility. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such behavior. The home of OEM and performance parts for VW Audi Seat Skoda and now we merge Ford, BMW, Vauxhall and many more parts into the shop. You can see Part Werx legacy feedback via the old part werx profile. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Type: Cat Back Exhaust Kit
    • Features: 100% Accuracy of Fit, Easy to Replace, Cat Back
    • Items Included: Muffler, Clamp, Pipe, Tip
    • Placement on Vehicle: Rear Bumper, Rear, Lower
    • Manufacturer Part Number: SSXBM1121
    • Material: Stainless Steel
    • Classic Part: No
    • Country/Region of Manufacture: United Kingdom
    • Performance Part: Yes
    • Universal Fitment: No
    • Mounting Style: Clamp-On
    • Manufacturer Warranty: Lifetime

    BMW 4 Series M4 Milltek Sport Race GPF/OPF Cat Back Exhaust Carbon Jet-90

    Tags: , , , , , , , ,

  • cobra Comments Off
    Cobra-Mazda-MX-5-ND-Mk4-Race-Rear-Axle-Back-Exhaust-2015-on-MZ21-01-ootx Cobra Mazda MX 5 ND Mk4 Race Rear Axle Back Exhaust 2015 on MZ21
    Cobra Mazda MX 5 ND Mk4 Race Rear Axle Back Exhaust 2015 on MZ21

    Cobra Mazda MX 5 ND Mk4 Race Rear Axle Back Exhaust 2015 on MZ21
    Price Shown is at least 10% off the RRP. MODEL – MX-5 (ND) Mk4. YEAR – 2015 0n. PART DESCRIPTION – Race Rear Axle Back Performance Exhaust. BORE SIZE – 2.5/63.5mm. PART NUMBER – MZ21. TAIL PIPE OPTIONS – (some options incur additional cost, these are shown in brackets). If no option is requested, we will send the most suited and popular version for your vehicle, which is usually the tip shown in the main image. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. The Cobra Sport race type rear axle back for the MX-5 ND is the perfect upgrade for the motorist that requires more feel and emotion from their drive without breaking the bank. Offering the simplest solution to enhanced sound, the Cobra Sport race type axle back system replaces the stock rear silencer of the MX-5 with a free flowing stainless steel silencer unlocking a feeling of audible emotion as the ND accelerates through the rev range. Whilst providing the perfect Sunday soundtrack the Cobra Sport system also boasts a visual upgrade to make the rear of the ND stand out with optional carbon fibre tailpipes for those really wishing to make an entrance. This Mk4 Mazda MX-5 (ND) performance exhaust is made in 2.5/63.5mm pipework and fits from the centre section backwards, replacing the rear section only. Sound test results (1.5L RF): Engine at Idle: 68.7dB (+5dB) – Static 4,000rpm test: 93.1dB (+9.2dB). All relevant fittings and gaskets are supplied. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country. Please note – Some systems will be made to order, please allow time for your system to be made. Found this system cheaper elsewhere? Mandrel bends for optimum flow. Remapping is recommended when purchasing / fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sport cats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. How are your exhausts made? All of our exhausts are made from aircraft grade 304 stainless steel and constructed using precision TIG welding with mandrel formed bends in the pipe work for a smoother gas flow. We pride ourselves in producing high quality products. What sound can I expect from your exhausts? Our exhausts will have a more sporty tone than original equipment exhausts. This is an inevitable result of the less restrictive systems we produce. However, with careful design and production methods, we aim to keep a subtle sporty tone. If you prefer a loud system, then one of our non-resonated (no centre box) exhaust systems will provide a louder exhaust note. Many of our products feature a movie of the exhaust and give some idea as to the sound which you can expect. What power gains can I expect to achieve? Of course this varies from engine to engine, our systems are designed and manufactured to maximize gas flow with increased diameter pipe work, free flowing silencers and mandrel bends which provide a much less restrictive exhaust system than original equipment exhausts, resulting in a much better engine response and increased BHP. Typically you can expect to achieve around a 10% increase from the installation of a cat-back system. Some individual products also show approximate power gains. Is it legal to put a de-cat pipe on my car? You can only de-cat your car if it was registered prior to 1992, otherwise it will fail the emissions check at your MOT station. Will my car need remapping? If you are fitting a cat back system to your car, this will have no effect on the engine management operations. However, if you are replacing your original system with a de-cat, sports cat or front pipe your car may need remapping as it may cause the vehicles engine management light to activate. What is the difference between resonated and non-resonated systems? Resonators are box chambers incorporated into the exhaust system, which are used to make the exhaust quieter, by cancelling certain sound frequencies. A non-resonated exhaust system will therefore, give a louder exhaust note and a resonated exhaust system, a quieter exhaust note. Either option will still provide extra performance. What is a Slash-Cut tailpipe? Slash-cut tailpipes are finished and cut off at a 15 degree angle, and suit certain types of vehicles depending upon the shape of the bumper and overall aesthetics of the vehicle. If you require any advice on which tailpipe would be most appropriate for your car, please give us a call. What will be the finish of my exhaust? All our exhausts come with highly polished mirror finish tailpipes and rear boxes. All other pipework and gaskets etc, will be a matt polished finish. How do I keep my exhaust looking like new? If you do not clean your exhaust/tailpipe, it will eventually become discoloured and be more difficult to bring back to its original finish. Regular cleaning with a non-abrasive metal polish such as Solvol Autosol® will ensure that your exhaust continues to look as new. As a company we are committed to continuous improvement and investing in new developments, with a keen focus on quality and service our loyal highly trained team are always happy to help. The production facilities at Cobra Sport exhausts enables us to produce exhausts in high volume and having worked with clients such as Subaru UK, Isuzu UK and Ginetta Cars to name but a few. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, Japan, Australia, Bahrain, New Zealand, Hong Kong, Indonesia, Malaysia, Singapore, Taiwan, Thailand, Bangladesh, Brunei Darussalam, Jordan, Sri Lanka, Macau, Maldives, Saudi Arabia, United Arab Emirates, Kuwait, Philippines, Vietnam.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Interchange Part Number: MZ21
    • Warranty Period: LIFETIME (CONDITIONS APPLY)
    • Unit Quantity: 1
    • Grade: T304 STAINLESS STEEL
    • Manufacturer Part Number: MZ21
    • Classic Car Part: No
    • Other Part Number: MZ21
    • Brand: Cobra Sport

    Cobra Mazda MX 5 ND Mk4 Race Rear Axle Back Exhaust 2015 on MZ21

    Tags: , , , , , , ,

  • magnaflow Comments Off
    Magnaflow-Axle-Back-Race-Exhaust-2017-Camaro-V6-Revs-And-Idles-01-db

    Tags: , , , , , , ,

« Previous Entries