WP_Cloudy

Section

Archive

January 2022
M T W T F S S
« Dec    
 12
3456789
10111213141516
17181920212223
24252627282930
31  

Recent Search

  • milltek Comments Off
    Milltek-Audi-RS5-Cat-Back-Race-Exhaust-Cerakote-Black-Oval-Trims-SSXAU850-01-bomp Milltek Audi RS5 Cat Back Race Exhaust Cerakote Black Oval Trims SSXAU850

    Milltek Audi RS5 Cat Back Race Exhaust Cerakote Black Oval Trims SSXAU850
    Price Shown is at least 10% off the RRP. Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) (Pre-facelift Only) 2019 and Later. Cat Back Non-Resonated Race (Loudest) – with Cerakote Black Oval Trims. MSAU739: LH Lower Downpipe. MSAU724: RH Lower Downpipe. MSAU725REP: Front Silencer Replacement Pipe. MSAU727REP: Centre Silencer Replacement Pipe. MSAU728: LH Rear Silencer (Race) Valved. MSAU729: RH Rear Silencer (Race) Valved. ACTUATOR01 x2: Electronic Valve Motors. MSTIP242: LH Cerakote Black Oval Trim (170x107mm). MSTIP243: RH Cerakote Black Oval Trim (170x107mm). Bore Size (pipe diameter). 2.76 (70.00mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, Japan, Australia, Canada, New Zealand, Indonesia, Malaysia, Singapore, Taiwan, Thailand, Brunei Darussalam, Kuwait, Philippines.
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXAU850
    • Manufacturer Part Number: SSXAU850
    • Other Part Number: SSXAU850
    • Brand: Milltek
    • Material: T304 Stainless Steel

    Milltek Audi RS5 Cat Back Race Exhaust Cerakote Black Oval Trims SSXAU850

    Tags: , , , , , , , , ,

  • milltek Comments Off
    Milltek-MK7-Golf-R-Cat-Back-Exhaust-System-Resonated-Race-Polished-Oval-SSXVW308-01-wry Milltek MK7 Golf R Cat Back Exhaust System Resonated Race Polished Oval SSXVW308

    Milltek MK7 Golf R Cat Back Exhaust System Resonated Race Polished Oval SSXVW308
    Price Shown is at least 10% off the RRP. Volkswagen Golf MK7 R 2.0 TSI 300PS 2014 to 2016. MSVW441: Rear Silencer (non-valved). MSTIP159 x4: Polished Oval Tips. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Interchange Part Number: SSXVW308
    • Manufacturer Part Number: SSXVW308
    • Other Part Number: SSXVW308
    • Brand: Milltek Sport
    • Type: cat back exhaust system
    • Part Manufacturer: Milltek

    Milltek MK7 Golf R Cat Back Exhaust System Resonated Race Polished Oval SSXVW308

    Tags: , , , , , , , , ,

  • milltek Comments Off
    Milltek-Golf-R-MK7-Exhaust-Cat-Back-ROAD-3-RACE-Non-Valved-Polished-Oval-Tips-01-yve Milltek Golf R MK7 Exhaust Cat Back ROAD+ 3 RACE Non Valved Polished Oval Tips
    Milltek Golf R MK7 Exhaust Cat Back ROAD+ 3 RACE Non Valved Polished Oval Tips
    Milltek Golf R MK7 Exhaust Cat Back ROAD+ 3 RACE Non Valved Polished Oval Tips
    Milltek Golf R MK7 Exhaust Cat Back ROAD+ 3 RACE Non Valved Polished Oval Tips
    Milltek Golf R MK7 Exhaust Cat Back ROAD+ 3 RACE Non Valved Polished Oval Tips
    Milltek Golf R MK7 Exhaust Cat Back ROAD+ 3 RACE Non Valved Polished Oval Tips

    Milltek Golf R MK7 Exhaust Cat Back ROAD+ 3 RACE Non Valved Polished Oval Tips
    BRAND NEW MILLTEK STAINLESS STEEL 3 CAT BACK SYSTEM ROAD+ NON VALVED TO FIT GOLF MK7 R 2.0 TSI 300PS 2014 – 2016. Golf MK7 R 2.0 TSI 300PS 2014 – 2016 Pre Facelift. 3 Non Valved Race System – ROAD+ – QUIETER Polish Tips. Milltek Sport Launches Race Exhaust System for the Mk7 VW Golf R. Milltek Sport have released a new Race system option for general sale. While based on their existing system, Milltek’s engineers have removed the two Active Exhaust Valves from the silencer outlet pipes to save weight and cost and revised the internal design of the rear silencer to produce a consistent sound throughout the entire rev-range. The external rear silencer body is unchanged and still features the same compact design of the regular Milltek system – which reduces the size of the silencer considerably over the OE system making it virtually invisible behind the rear bumper. The system is based around 3-inch (76mm) stainless steel pipe diameter. Milltek’s Technicians used advanced gas-flow analysis and extensive road/dyno testing to show this bore size offered the optimal blend of increased power with a perfectly judged rich sound quality. As with the regular road system, the Race system is available with either a centre silencer (referred to as Resonated or ROAD+) or a centre silencer delete pipe (Non-Resonated) allowing you to customise the sound level inside the car. For customers looking to get the best possible performance from their R, Milltek Sport has also developed a range of larger-bore downpipe options which, when combined with the cat-back system, makes a full turbo-back system. Depending on local emissions laws, customers can choose from an ultra-high-performance 200 cell hi-flow sports catalyst or a catalyst removal pipe. Built with racing in mind, the new Race option has been subjected to extensive track testing on their own VW Golf R at the 2014 Hockenheim Tuner GP and done many thousands of miles both on and off the race track. A Milltek Stainless Steel. 3 Race Exhaust System Non Valved. This ROAD+ system is slightly quieter than the non res non valved system but not as quiet as the resonated non valved system. Includes Centre Silencer ROAD+, Rear Silencer Non Valved, Polished Oval Tips & Appropriate Fitting Kit. VW Golf MK7 R. 2.0 TSi 300PS. MSAU622 (Centre Silencer ROAD+). MSVW441 (Rear Silencer Non-Valved). MSTIP159 x 4 (Polished Oval Tips). 3.00-inch (76.20mm). 4 x Polished Oval Trims. The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek are the exhaust specialists! Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge – noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49. PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Brand: Milltek
    • Type: Exhaust
    • Part Manufacturer: Milltek
    • Make: Milltek
    • Intended Use: Modification/ Enhancement
    • Model/ Series: Golf MK7 R 2.0 TSi 300PS 2014 – 2016 Pre Facelift
    • Subtype: 3\
    • Country/Region of Manufacture: United Kingdom
    • Manufacturer Part Number: MSAU622 MSVW441 MSTIP159 x 4
    • Other Part Number: MSAU622, MSVW441, MSTIP159, GOLF R, MK7, R, ROAD+
    • Part Manufacturer Number: MSAU622 MSVW441 MSTIP159 x 4
    • TAILPIPE: 4 x Polished Oval Trims
    • PIPE DIAMETER SIZE OD: 3.00-inch (76.20mm)
    • EXHAUST TYPE: ROAD+ System – (Inbetween Non Res and Resonated)
    • SYSTEM TYPE: Non Valved – ROAD+

    Milltek Golf R MK7 Exhaust Cat Back ROAD+ 3 RACE Non Valved Polished Oval Tips

    Tags: , , , , , , , , ,

  • milltek Comments Off
    Milltek-Audi-RS5-B9-Cat-Back-Race-Exhaust-Non-Res-Titanium-Oval-Trims-SSXAU851-01-kzv Milltek Audi RS5 B9 Cat Back Race Exhaust Non Res Titanium Oval Trims SSXAU851

    Milltek Audi RS5 B9 Cat Back Race Exhaust Non Res Titanium Oval Trims SSXAU851
    Price Shown is at least 10% off the RRP. Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) (Pre-facelift Only) 2019 and Later. Cat Back Non-Resonated Race (Loudest) – with Titanium Oval Trims. MSAU739: LH Lower Downpipe. MSAU724: RH Lower Downpipe. MSAU725REP: Front Silencer Replacement Pipe. MSAU727REP: Centre Silencer Replacement Pipe. MSAU728: LH Rear Silencer (Race) Valved. MSAU729: RH Rear Silencer (Race) Valved. ACTUATOR01 x2: Electronic Valve Motors. MSTIP255: LH Titanium Oval Trim (170×107). MSTIP256: RH Titanium Oval Trim (170×107). Bore Size (pipe diameter). 2.76 (70.00mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, Japan, Australia, Canada, New Zealand, Indonesia, Malaysia, Singapore, Taiwan, Thailand, Brunei Darussalam, Kuwait, Philippines.
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXAU851
    • Manufacturer Part Number: SSXAU851
    • Other Part Number: SSXAU851
    • Brand: Milltek
    • Material: T304 Stainless Steel

    Milltek Audi RS5 B9 Cat Back Race Exhaust Non Res Titanium Oval Trims SSXAU851

    Tags: , , , , , , , ,

  • audi Comments Off
    Audi-S5-3-0-TFSI-B8-Milltek-Sport-Race-Version-Cat-Back-Exhaust-Dual-Polish-Oval-01-bpr Audi S5 3.0 TFSI B8 Milltek Sport Race Version Cat Back Exhaust Dual Polish Oval

    Audi S5 3.0 TFSI B8 Milltek Sport Race Version Cat Back Exhaust Dual Polish Oval
    Audi S5 3.0 TFSI B8 Milltek Sport Race Version Cat Back Exhaust System Dual Polished Oval Tips. Genuine Brand New Milltek Sport Race Version Cat Back Exhaust System. Milltek Sport Race Version Cat Back Exhaust System. Dual Polished Oval Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Not Recommended For Road Use. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts In SSXAU357 Cat Back Exhaust System. MSAU512: Front Silencer Assembly. MSAU464: Centre Silencer Assembly. MSAU467: LH Rear Silencer Bypass Pipe. MSAU468: RH Rear Silencer Bypass Pipe. MSTIP146: LH Polished Tip. MSTIP147: RH Polished Tip. Pipe Diameter Ø: 2.37-inch (60.30mm) Tip Style: 150 x 95mm Polished Oval. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine VW/Audi & Performance Parts. Helping you to stay mobile. Most questions can be answered by reading the listing description below, but if you have any questions please message. Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. The item “Audi S5 3.0 TFSI B8 Milltek Sport Race Version Cat Back Exhaust Dual Polish Oval” is in sale since Sunday, September 2, 2018. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in Lincolnshire. This item can be shipped worldwide.
    • Brand: Milltek Sport
    • Manufacturer Part Number: SSXAU357

    Audi S5 3.0 TFSI B8 Milltek Sport Race Version Cat Back Exhaust Dual Polish Oval

    Tags: , , , , , , , , , ,

  • audi Comments Off
    Audi-RS5-B9-Turbo-Coupe-Milltek-Sport-Race-Cat-Back-Exhaust-Cerakote-Black-Oval-01-dcss Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Cerakote Black Oval
    Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Cerakote Black Oval

    Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Cerakote Black Oval
    Audi RS5 B9 Turbo Coupe Milltek Sport Race Non Resonated Cat Back Exhaust System Cerakote Black Oval Trims. Genuine Brand New Milltek Sport Race Non Resonated Cat Back Exhaust System. Milltek Sport Race Non Resonated Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Cerakote Black Oval Trims. Louder – This is a non resonated system, louder than resonated. If you want the quieter resonated system please see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXAU755 Cat Back System. MSAU723: LH Lower Downpipe. MSAU724: RH Lower Downpipe. MSAU725REP: Front Silencer Replacement Pipe. MSAU727REP: Centre Silencer Replacement Pipe. MSAU728: LH Rear Silencer (Race) Valved. MSAU729: RH Rear Silencer (Race) Valved. MSVS032 x2: Valve Extension Cables. MSTIP242: LH Cerakote Black Oval Trim (170×107). MSTIP243: RH Cerakote Black Oval Trim (170×107). Pipe Ø: 2.76? We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine OEM and Performance Parts. Helping you to stay mobile. Most questions can be answered by reading the listing description, but if you have any questions please message. Car Gaming Racing Simulators. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. All other Non VW Parts. The item “Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Cerakote Black Oval” is in sale since Sunday, May 19, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in UK. This item can be shipped worldwide.
    • Brand: Milltek Sport
    • Manufacturer Part Number: SSXAU755

    Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Cerakote Black Oval

    Tags: , , , , , , , , , ,

  • 97-04 Comments Off
    For-97-04-Chevy-Corvette-Ls1-Z06-Oval-Quad-Tips-Muffler-Axle-Back-Exhaust-System-01-grt For 97-04 Chevy Corvette Ls1 Z06 Oval Quad Tips Muffler Axle Back Exhaust System

    For 97-04 Chevy Corvette Ls1 Z06 Oval Quad Tips Muffler Axle Back Exhaust System
    For 97-04 Chevy Corvette Ls1 Z06 Oval Quad Tips Muffler Axle Back Exhaust System. 100% Brand New, never been used. Super light weight design. SUS-304 Stainless Made Steel with Polish Finish. Designed for high performance with build in resonator to help meet sound level standards. Will dramatically improve response and high RPM / HP. Optimize power band mid range to high RPM power. Racing spec design to gain more horse power, faster response, averaging 15-20 Extra HP. I tems may not always be in stock. S hipping Carriers used will be based on weight/length/destination of the customer. G round Carriers do not deliver to PO BOX and additional charges will be required. Canada and International Countries. W e cannot mark merchandise values below value or mark items as “gifts” – US and International Government Regulations prohibit such behavior. T he customer is responsible for making any changes prior to purchasing. PO BOX , GU , PR , HI , AK , APO/FPO. 9.50% California Customers / 8.25% Texas Customers. A ll return merchandise must be authorized and assigned with a RETURN AUTHORIZATION NUMBER R. N from our customer service representatives before returning a product. M erchandise return without R. Please write the R. T he R. I t is the responsibility of the customer to repack the items for the return. Return labels are not given to return these items. W e specialize in aftermarket automotive car replacement parts carrying a variety of products to power, improve, or just make your ride more enjoyable. W e are a distributor for affordable and quality products who sell the public. O ur feedback showers that we’ve been doing this for a while and work to accommodate your every needs. P lease note it may take up to 24-48 hours before a response is received by the messaging system, but rest assured that your questions will be answered as soon as possible. C ommunication is very important and we will try our best to assist all our customers with any concerns. H ave a question? And we will reply to your message. W e are closed during the weekend and holidays and cannot respond to emails during those times but will respond as soon as we return. Q uestions are answered in the order they arrive as quickly as possilble. The item “For 97-04 Chevy Corvette Ls1 Z06 Oval Quad Tips Muffler Axle Back Exhaust System” is in sale since Monday, January 6, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “awesomecarparts” and is located in La Puente, California. This item can be shipped worldwide.
    • Other Part Number: T304 Stainless Steel Performance Racing Catback System Axle Back
    • Warranty: Yes
    • Manufacturer Part Number: CB-CH62970CH-ACP-D1 1997 1998 1999 2000 2001 2002 2003 2004 Pipe
    • Quantity: 1x Axle Back Exhaust System
    • Piping Diameter: 2.5″ / 65mm
    • Installation Guides: No Installation Guides Included
    • Placement on Vehicle: Rear
    • Brand: Awesomecarparts
    • Interchange Part Number: 97 98 99 00 01 02 03 04 2.5″ 2.5IN 65mm Piping 4.5″ 4.5IN Tip
    • Muffler Tip Size: 4.5″
    • Fitment: 1997-2004 Chevy Corvette
    • Surface Finish: Stainless Steel Polish

    For 97-04 Chevy Corvette Ls1 Z06 Oval Quad Tips Muffler Axle Back Exhaust System

    Tags: , , , , , , , , , ,

  • audi Comments Off
    Audi-S4-3-0-B8-Milltek-Cat-Back-Exhaust-Race-Version-x2-Oval-Cerakote-Black-01-eqt Audi S4 3.0 B8 Milltek Cat Back Exhaust Race Version x2 Oval Cerakote Black

    Audi S4 3.0 B8 Milltek Cat Back Exhaust Race Version x2 Oval Cerakote Black
    Audi S4 3.0 B8 Milltek Sport Cat Back Exhaust System Race Version x2 Oval Cerakote Black Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System Race Version. Milltek Sport Cat Back Exhaust System Race Version. Dual Cerakote Black Oval Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts In SSXAU240 Cat Back Exhaust System. MSAU463: Front Silencer Assembly. MSAU464: Centre Silencer Assembly. MSAU467: LH Rear Silencer Bypass Pipe. MSAU468: RH Rear Silencer Bypass Pipe. MSTIP144: LH Black Tip. MSTIP145: RH Black Tip. Pipe Diameter Ø: 2.37-inch (60.30mm) Tip Style: 150 x 95mm Black Oval Fitting takes from 2.00-3.00 hours (including removing OE system). We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine OEM & Performance Parts. Helping you to stay mobile. Message us if you have any questions. Car Gaming Racing Simulators. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. All other Non VW Parts. Audi S4 3.0 B8 Milltek Cat Back Exhaust Race Version x2 Oval Cerakote Black. RC + Scale Models. Golf MK3 Engine Raisers. For 1000s more of the best available parts. The item “Audi S4 3.0 B8 Milltek Cat Back Exhaust Race Version x2 Oval Cerakote Black” is in sale since Sunday, August 5, 2018. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in UK. This item can be shipped worldwide.
    • Brand: Milltek Sport
    • Manufacturer Part Number: SSXAU240

    Audi S4 3.0 B8 Milltek Cat Back Exhaust Race Version x2 Oval Cerakote Black

    Tags: , , , , , , , ,

  • golf Comments Off
    VW-Golf-MK7-GTI-Milltek-3-Race-R-Style-Cat-Back-Exhaust-Black-Oval-Tips-Non-Res-01-egd VW Golf MK7 GTI Milltek 3 Race R Style Cat Back Exhaust Black Oval Tips Non Res

    VW Golf MK7 GTI Milltek 3 Race R Style Cat Back Exhaust Black Oval Tips Non Res
    VW Golf MK7 GTI Milltek Sport 3 Race R Style Cat Back Exhaust Black Oval Tips Non Resonated. Genuine Brand New Milltek Sport 3 Race Golf R Style Non Resonated Cat Back Exhaust System. Milltek Sport Non Resonated Cat Back Exhaust System. 2x Twin Cerakote Black Oval Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Requires Mk7 Golf R Rear Bumper and Valance. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXVW326 R Style Cat Back System. MSVW402REP: Front Silencer Bypass Pipe. MSVW403: Centre Silencer Assembly. MSVW459: Golf R-Style Twin Outlet Pipe Assembly. MSTIP182: LH Twin Oval Tip Assembly Black Oval. MSTIP183: RH Twin Oval Tip Assembly Black Oval. Pipe Diameter: 3.00-inch (76.20mm). Fits: Volkswagen Golf MK7 GTi (including GTi Performance Pack, Clubsport & Clubsport S models) 2013 to 2016. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine OEM & Performance Parts. Update from the team at VW Parts Int. Helping you to stay mobile. Priority support for key/essential workers, show ID for priority dispatch/assistance. We are working to very strict measures to maintain service and ensure staff and customer safety. Please be safe when working on your car, follow workshop manuals carefully. Vehicles still need to be maintained and kept roadworthy but please work safely and consider impact of works on others. UK, if outside UK check restrictions locally. All postal and courier networks are doing their utmost best to deliver, though there are some delays and to be expected. Global networks are open, with some delays while social distancing is in place. Some manufacturers have temporarily limited or stopped production, though many are stocked so should a part not be available we will message at once. If key worker show ID and we’ll see what can be done! Please have patience and understanding during these times as we try to help you maintain your vehicle. Thanks to everyone keeping networks moving and our key workers saving lives and helping others. Message us if you have any questions. Car Gaming Racing Simulators. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. All other Non VW Parts. VW Golf MK7 GTI Milltek 3′ Race R Style Cat Back Exhaust Black Oval Tips Non Res. RC + Scale Models. Golf MK3 Engine Raisers. For 1000s more of the best available parts. The item “VW Golf MK7 GTI Milltek 3 Race R Style Cat Back Exhaust Black Oval Tips Non Res” is in sale since Friday, May 13, 2016. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in UK. This item can be shipped worldwide.
    • Brand: Milltek Sport
    • Country/Region of Manufacture: United Kingdom
    • Manufacturer Part Number: SSXVW326
    • Type: Catback Exhaust System 2x Twin Tailpipes

    VW Golf MK7 GTI Milltek 3 Race R Style Cat Back Exhaust Black Oval Tips Non Res

    Tags: , , , , , , , ,

  • golf Comments Off
    VW-Golf-MK7-R-Milltek-Sport-3-Race-Non-Valve-Res-Cat-Back-Exhaust-4x-Black-Oval-01-ss VW Golf MK7 R Milltek Sport 3 Race Non Valve Res Cat Back Exhaust 4x Black Oval

    VW Golf MK7 R Milltek Sport 3 Race Non Valve Res Cat Back Exhaust 4x Black Oval
    VW Golf MK7 R Milltek Sport 3 Race Non Valve Resonated Cat Back Exhaust 4x Black Oval Tips. Genuine Brand New Milltek 3 Race Non Valved Resonated Cat Back Exhaust System. Milltek Sport Resonated Cat Back Exhaust System. 4x Cerakote Black Velvet Oval Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Valve motor from the OE exhaust is not used on this system. For valved systems please see other listings. Quieter – this is a resonated system, quieter than non resonated, if you want the louder non resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Cat Back System SSXVW309 Includes. MSVW441: Rear Silencer (non-valved). MSTIP160 x4: Cerakote Black Velvet Oval Tips. Pipe Diameter Ø: 3.00-inch (76.20mm). Fits: VW Golf MK7 R 300PS 2013 and later Valve motor from the OE exhaust is NOT required for fitment. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine OEM & Performance Parts. Want to see a video of this system in action? The check this out. Update from the team at VW Parts Int. Helping you to stay mobile. Priority support for key/essential workers, show ID for priority dispatch/assistance. We are working to very strict measures to maintain service and ensure staff and customer safety. Please be safe when working on your car, follow workshop manuals carefully. Vehicles still need to be maintained and kept roadworthy but please work safely and consider impact of works on others. UK, if outside UK check restrictions locally. All postal and courier networks are doing their utmost best to deliver, though there are some delays and to be expected. Global networks are open, with some delays while social distancing is in place. Some manufacturers have temporarily limited or stopped production, though many are stocked so should a part not be available we will message at once. If key worker show ID and we’ll see what can be done! Please have patience and understanding during these times as we try to help you maintain your vehicle. Thanks to everyone keeping networks moving and our key workers saving lives and helping others. Message us if you have any questions. Car Gaming Racing Simulators. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. All other Non VW Parts. VW Golf MK7 R Milltek Sport 3′ Race Non Valve Res Cat Back Exhaust 4x Black Oval. RC + Scale Models. Golf MK3 Engine Raisers. For 1000s more of the best available parts. The item “VW Golf MK7 R Milltek Sport 3 Race Non Valve Res Cat Back Exhaust 4x Black Oval” is in sale since Sunday, September 18, 2016. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in UK. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Brand: Milltek
    • Manufacturer Part Number: SSXVW309
    • Type: Cat Back Exhaust System

    VW Golf MK7 R Milltek Sport 3 Race Non Valve Res Cat Back Exhaust 4x Black Oval

    Tags: , , , , , , , ,

« Previous Entries