WP_Cloudy

Section

Archive

November 2022
M T W T F S S
« Oct    
 123456
78910111213
14151617181920
21222324252627
282930  
  • milltek Comments Off
    Milltek-GPF-Back-Race-Non-Resonated-Exhaust-System-For-Audi-RS3-8Y-Sportback-22-01-noex Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22

    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22
    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22- Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware. Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance. Rear Silencers / Axle back systems are designed to directly replace ther OE rear silencer with a freer flowing option, improving sound and aesthetics of the system. Milltek exhausts offers a significant increase in performance and torque due to reduction of back pressure and flow optimization. Less weight and the well-known Milltek sound are additional features, which puts Milltek sport exhausts aside from the rest. MSAU764REP: Centre Silencer Replacement Pipe (80mm Version). MSAU827: Race Rear Silencer. MSAU822: LH Inner Outlet Pipe. MSAU823: RH Inner Outlet Pipe. MSAU824: LH Valved Outlet Pipe. MSAU825: RH Valved Outlet Pipe. Available As Resonated (Quietest), Non-Resonated (Louder), Race (Loudest) – This listing is for the race varient (loudest system). Performance increase, low back pressure. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Perfect shape and fitment. Pipe Diameter is 3.15-inch (80.00mm). Audi RS3 8Y Sportback / Hatchback 2022. OPF/GPF equipped cars only. If there will be any delays in your order you will be informed within 24-48 hours. Distributed By Haz Motorsport. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “haz_motorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Pipe Diameter: 3.15-inch (80.00mm)
    • Product Type: GPF Back Exhaust
    • Manufacturer Part Number: SSXAU975
    • Vehicle Make: Audi
    • Vehicle Model: RS3 8Y 2022- Hatback / Sportback Only
    • Reference OE/OEM Number: SSXAU975, Milltek, Audi RS3 8Y Hatchback / Sportback, Race System
    • Brand: Milltek

    Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22

    Tags: , , , , , , ,

  • cobra Comments Off
    Cobra-Citroen-DS3-1-6-Racing-2-5-Non-Resonated-Cat-Back-Exhaust-CT15YTP07R-01-rro Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP07R
    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP07R

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP07R
    Performance Exhausts Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. UK Manufactured All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. The heritage in the UK’s performance exhaust market spans over five decades with a proven track record of a commitment to continuous improvement and investment in new exhaust technology. This commitment has resulted in the company being awarded the “Made In Sheffield” mark which is a symbol of excellence in manufacturing which is recognised worldwide. Cobra Sport’s range of performance exhausts demonstrate the highest quality of manufacturing, each system is hand-made in Sheffield and in-house expertise ensures that all Cobra Sport Exhausts are engineered the highest tolerances ensuring a perfect first-time fit, great performance and a truly pitch perfect exhaust sound. Cobra Sport’s Exhaust production facilities are geared up to producing performance exhausts in high volume, not only for themselves but also for clients such as Subaru UK, Isuzu UK and Ginetta Cars, to name a few. This does not preclude working for clients on an individual’one-off’ basis for proto-type or custom developments whether that be for road, track or race exhausts. Precision power, matched by sensational looks and an inspirational sound is the Cobra Sport promise. Quality Manufacturing Cobra Sport brings four decades of innovative design and unparalleled manufacturing expertise to their range of performance exhausts that match the aspirations of the most demanding driver. Engineered to the highest tolerances with Mandrel tube bending to ensure a smooth unrestricted airflow, advanced manufacturing techniques and superior TIG welding procedures produce a superlative finish, while total precision and extensive testing ensures a perfect first-time fit and a truly pitch-perfect sound. TIG Not MIG All Cobra Sport Exhausts feature tungsten inert gas (TIG) welding rather than metal inert gas (MIG) which is used employed by many competitors in the aftermarket performance exhaust market. Cobra Sport Exhausts are hand crafted by highly trained exhaust technicians in Sheffield, utilising superior TIG welding techniques to create a product of the highest standard. When compared with MIG, TIG welding is a technically superior, intricate and highly precise process requiring a much higher level of operator skill, co-ordination and experience. TIG welding requires the components to be spotlessly clean prepared surfaces and cut to within smaller tolerances enabling an aesthetic weld with no splatter. TIG welding produces a stronger more durable weld that is generally more malleable and less brittle due to the slower cooling rate of the metals. The TIG welding process heats the stainless steel enough to bond with minimal filler needed. This process allows total control over the weld producing a perfect bead with a flatter, intricate and visually striking finish in keeping with the hand crafted quality associated with Cobra Sport Exhausts. MIG welding is more commonly used for lengthier welds where speed is key but lacks precise control of the finish weld leading to splatter, rough edges and overspill. The precision of TIG welding makes it the best option for detailed performance exhaust manufacture where precision, strength, longevity and visual appeal is key. We are dedicated to ensuring the highest possible quality service to our customers. One of our sales team will be on hand to help you as soon as possible. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gnj_automotive” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Warranty Period: Lifetime (Original Purchaser)
    • Material: T304 Stainless Steel
    • Manufacturer Part Number: CT15YTP07R/2
    • Classic Car Part: No
    • Brand: Cobra Sport

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP07R

    Tags: , , , , , ,

  • cobra Comments Off
    Cobra-Citroen-DS3-1-6-Racing-2-5-Non-Resonated-Cat-Back-Exhaust-CT15YTP10R-01-ww Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP10R
    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP10R

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP10R
    Performance Exhausts Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. UK Manufactured All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. The heritage in the UK’s performance exhaust market spans over five decades with a proven track record of a commitment to continuous improvement and investment in new exhaust technology. This commitment has resulted in the company being awarded the “Made In Sheffield” mark which is a symbol of excellence in manufacturing which is recognised worldwide. Cobra Sport’s range of performance exhausts demonstrate the highest quality of manufacturing, each system is hand-made in Sheffield and in-house expertise ensures that all Cobra Sport Exhausts are engineered the highest tolerances ensuring a perfect first-time fit, great performance and a truly pitch perfect exhaust sound. Cobra Sport’s Exhaust production facilities are geared up to producing performance exhausts in high volume, not only for themselves but also for clients such as Subaru UK, Isuzu UK and Ginetta Cars, to name a few. This does not preclude working for clients on an individual’one-off’ basis for proto-type or custom developments whether that be for road, track or race exhausts. Precision power, matched by sensational looks and an inspirational sound is the Cobra Sport promise. Quality Manufacturing Cobra Sport brings four decades of innovative design and unparalleled manufacturing expertise to their range of performance exhausts that match the aspirations of the most demanding driver. Engineered to the highest tolerances with Mandrel tube bending to ensure a smooth unrestricted airflow, advanced manufacturing techniques and superior TIG welding procedures produce a superlative finish, while total precision and extensive testing ensures a perfect first-time fit and a truly pitch-perfect sound. TIG Not MIG All Cobra Sport Exhausts feature tungsten inert gas (TIG) welding rather than metal inert gas (MIG) which is used employed by many competitors in the aftermarket performance exhaust market. Cobra Sport Exhausts are hand crafted by highly trained exhaust technicians in Sheffield, utilising superior TIG welding techniques to create a product of the highest standard. When compared with MIG, TIG welding is a technically superior, intricate and highly precise process requiring a much higher level of operator skill, co-ordination and experience. TIG welding requires the components to be spotlessly clean prepared surfaces and cut to within smaller tolerances enabling an aesthetic weld with no splatter. TIG welding produces a stronger more durable weld that is generally more malleable and less brittle due to the slower cooling rate of the metals. The TIG welding process heats the stainless steel enough to bond with minimal filler needed. This process allows total control over the weld producing a perfect bead with a flatter, intricate and visually striking finish in keeping with the hand crafted quality associated with Cobra Sport Exhausts. MIG welding is more commonly used for lengthier welds where speed is key but lacks precise control of the finish weld leading to splatter, rough edges and overspill. The precision of TIG welding makes it the best option for detailed performance exhaust manufacture where precision, strength, longevity and visual appeal is key. We are dedicated to ensuring the highest possible quality service to our customers. One of our sales team will be on hand to help you as soon as possible. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gnj_automotive” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Warranty Period: Lifetime (Original Purchaser)
    • Material: T304 Stainless Steel
    • Manufacturer Part Number: CT15YTP10R/2
    • Classic Car Part: No
    • Brand: Cobra Sport

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP10R

    Tags: , , , , , ,

  • cobra Comments Off
    Cobra-Citroen-DS3-1-6-Racing-2-5-Non-Resonated-Cat-Back-Exhaust-CT15TP102-CF-01-cxg Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15TP102-CF
    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15TP102-CF

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15TP102-CF
    Performance Exhausts Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. UK Manufactured All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. The heritage in the UK’s performance exhaust market spans over five decades with a proven track record of a commitment to continuous improvement and investment in new exhaust technology. This commitment has resulted in the company being awarded the “Made In Sheffield” mark which is a symbol of excellence in manufacturing which is recognised worldwide. Cobra Sport’s range of performance exhausts demonstrate the highest quality of manufacturing, each system is hand-made in Sheffield and in-house expertise ensures that all Cobra Sport Exhausts are engineered the highest tolerances ensuring a perfect first-time fit, great performance and a truly pitch perfect exhaust sound. Cobra Sport’s Exhaust production facilities are geared up to producing performance exhausts in high volume, not only for themselves but also for clients such as Subaru UK, Isuzu UK and Ginetta Cars, to name a few. This does not preclude working for clients on an individual’one-off’ basis for proto-type or custom developments whether that be for road, track or race exhausts. Precision power, matched by sensational looks and an inspirational sound is the Cobra Sport promise. Quality Manufacturing Cobra Sport brings four decades of innovative design and unparalleled manufacturing expertise to their range of performance exhausts that match the aspirations of the most demanding driver. Engineered to the highest tolerances with Mandrel tube bending to ensure a smooth unrestricted airflow, advanced manufacturing techniques and superior TIG welding procedures produce a superlative finish, while total precision and extensive testing ensures a perfect first-time fit and a truly pitch-perfect sound. TIG Not MIG All Cobra Sport Exhausts feature tungsten inert gas (TIG) welding rather than metal inert gas (MIG) which is used employed by many competitors in the aftermarket performance exhaust market. Cobra Sport Exhausts are hand crafted by highly trained exhaust technicians in Sheffield, utilising superior TIG welding techniques to create a product of the highest standard. When compared with MIG, TIG welding is a technically superior, intricate and highly precise process requiring a much higher level of operator skill, co-ordination and experience. TIG welding requires the components to be spotlessly clean prepared surfaces and cut to within smaller tolerances enabling an aesthetic weld with no splatter. TIG welding produces a stronger more durable weld that is generally more malleable and less brittle due to the slower cooling rate of the metals. The TIG welding process heats the stainless steel enough to bond with minimal filler needed. This process allows total control over the weld producing a perfect bead with a flatter, intricate and visually striking finish in keeping with the hand crafted quality associated with Cobra Sport Exhausts. MIG welding is more commonly used for lengthier welds where speed is key but lacks precise control of the finish weld leading to splatter, rough edges and overspill. The precision of TIG welding makes it the best option for detailed performance exhaust manufacture where precision, strength, longevity and visual appeal is key. We are dedicated to ensuring the highest possible quality service to our customers. One of our sales team will be on hand to help you as soon as possible. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gnj_automotive” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Warranty Period: Lifetime (Original Purchaser)
    • Material: T304 Stainless Steel
    • Manufacturer Part Number: CT15TP102-CF/2
    • Classic Car Part: No
    • Brand: Cobra Sport

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15TP102-CF

    Tags: , , , , , ,

  • cobra Comments Off
    Cobra-Citroen-DS3-1-6-Racing-2-5-Non-Resonated-Cat-Back-Exhaust-CT15YTP18-01-vcwu Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP18
    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP18

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP18
    Performance Exhausts Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. UK Manufactured All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. The heritage in the UK’s performance exhaust market spans over five decades with a proven track record of a commitment to continuous improvement and investment in new exhaust technology. This commitment has resulted in the company being awarded the “Made In Sheffield” mark which is a symbol of excellence in manufacturing which is recognised worldwide. Cobra Sport’s range of performance exhausts demonstrate the highest quality of manufacturing, each system is hand-made in Sheffield and in-house expertise ensures that all Cobra Sport Exhausts are engineered the highest tolerances ensuring a perfect first-time fit, great performance and a truly pitch perfect exhaust sound. Cobra Sport’s Exhaust production facilities are geared up to producing performance exhausts in high volume, not only for themselves but also for clients such as Subaru UK, Isuzu UK and Ginetta Cars, to name a few. This does not preclude working for clients on an individual’one-off’ basis for proto-type or custom developments whether that be for road, track or race exhausts. Precision power, matched by sensational looks and an inspirational sound is the Cobra Sport promise. Quality Manufacturing Cobra Sport brings four decades of innovative design and unparalleled manufacturing expertise to their range of performance exhausts that match the aspirations of the most demanding driver. Engineered to the highest tolerances with Mandrel tube bending to ensure a smooth unrestricted airflow, advanced manufacturing techniques and superior TIG welding procedures produce a superlative finish, while total precision and extensive testing ensures a perfect first-time fit and a truly pitch-perfect sound. TIG Not MIG All Cobra Sport Exhausts feature tungsten inert gas (TIG) welding rather than metal inert gas (MIG) which is used employed by many competitors in the aftermarket performance exhaust market. Cobra Sport Exhausts are hand crafted by highly trained exhaust technicians in Sheffield, utilising superior TIG welding techniques to create a product of the highest standard. When compared with MIG, TIG welding is a technically superior, intricate and highly precise process requiring a much higher level of operator skill, co-ordination and experience. TIG welding requires the components to be spotlessly clean prepared surfaces and cut to within smaller tolerances enabling an aesthetic weld with no splatter. TIG welding produces a stronger more durable weld that is generally more malleable and less brittle due to the slower cooling rate of the metals. The TIG welding process heats the stainless steel enough to bond with minimal filler needed. This process allows total control over the weld producing a perfect bead with a flatter, intricate and visually striking finish in keeping with the hand crafted quality associated with Cobra Sport Exhausts. MIG welding is more commonly used for lengthier welds where speed is key but lacks precise control of the finish weld leading to splatter, rough edges and overspill. The precision of TIG welding makes it the best option for detailed performance exhaust manufacture where precision, strength, longevity and visual appeal is key. We are dedicated to ensuring the highest possible quality service to our customers. One of our sales team will be on hand to help you as soon as possible. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gnj_automotive” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Warranty Period: Lifetime (Original Purchaser)
    • Material: T304 Stainless Steel
    • Manufacturer Part Number: CT15YTP18/2
    • Classic Car Part: No
    • Brand: Cobra Sport

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15YTP18

    Tags: , , , , , ,

  • scorpion Comments Off
    Scorpion-Citroen-DS3-Racing-2-5-Non-Resonated-Cat-Back-Exhaust-SCNS014-01-aq Scorpion Citroen DS3 Racing 2.5 Non-Resonated Cat Back Exhaust SCNS014
    Scorpion Citroen DS3 Racing 2.5 Non-Resonated Cat Back Exhaust SCNS014
    Scorpion Citroen DS3 Racing 2.5 Non-Resonated Cat Back Exhaust SCNS014
    Scorpion Citroen DS3 Racing 2.5 Non-Resonated Cat Back Exhaust SCNS014

    Scorpion Citroen DS3 Racing 2.5 Non-Resonated Cat Back Exhaust SCNS014
    Hand Crafted Performance Exhausts You only have to touch a Scorpion exhaust to appreciate the premium design and construction qualities, which translate into tangible gains in both performance and reliability. Hand crafted in England and widely regarded as the best exhaust on the market today, Scorpion has become one of the most popular upgrades amongst both tuning enthusiasts and racers alike. But the real difference is the way a Scorpion feels. No other exhaust is created with our passion, expertise and experiences; because of this Scorpion’s appeal goes beyond the many superb product advantages. Everything that we have put into developing the world’s best exhausts over the years is designed to be shared, felt and experienced by you, the driver. Options Scorpion offer a wide range of exhaust options, most of which are interchangeable, meaning you can upgrade in stages. Cat Back Want a little more power from your car? A cat-back exhaust is the perfect compromise, leaving the factory catalysts (where fitted) in place and bolting directly to the OEM system. Scorpion’s cat back exhausts are designed for improved gas flow and sound, but leave the car fully road legal and MOT ready. De-Cat/Sports Cat A catalyst is a key component in emission control. It is also the most restrictive component of an exhaust. Our Sports Catalysts increase the gas flow while maintaining filtration rates. Our de-cats simply replace the catalyst altogether for the ultimate flow rate. Turbo Downpipe Turbo charged engines need to be able to breathe; to assist this a range of turbo down pipes have been developed to suit high powered turbo applications. To enable an increase in performance we match pipe diameters for the peak performance gains. Manifold High flow, light weight tubular manifolds using technology derived from our success partnered with top flight BTCC teams. We are dedicated to ensuring the highest possible quality service to our customers. One of our sales team will be on hand to help you as soon as possible. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gnj_automotive” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Warranty Period: Lifetime (Original Purchaser)
    • Material: T304/316 Stainless Steel
    • Manufacturer Part Number: SCNS014/2
    • Classic Car Part: No
    • Brand: Scorpion Exhausts

    Scorpion Citroen DS3 Racing 2.5 Non-Resonated Cat Back Exhaust SCNS014

    Tags: , , , , , ,

  • milltek Comments Off
    Milltek-VW-Golf-MK7-5-GTi-Cat-Back-Race-Non-Resonated-Exhaust-Burnt-Trims-01-tqg Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust Burnt Trims

    Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust Burnt Trims
    Price Shown is at least 10% off the RRP. Volkswagen Golf MK7.5 GTi (Performance Pack Models & Non OPF/GPF Equipped Models Only) 2017 to 2018. Cat Back Race Non-Resonated GT-100 Burnt Titanium Trims. MSVW402REP: Front Silencer Bypass Pipe. MSVW403: Centre Silencer Assembly. MSVW474: Rear Silencer Bypass. MSVW476 x2: Trim Extension Pipes. MSTIP194 x2: Burnt Titanium GT-100 Trims. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Material: T304 Stainless Steel
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXVW467
    • Manufacturer Part Number: SSXVW467
    • Other Part Number: SSXVW467
    • Brand: Milltek

    Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust Burnt Trims

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-VW-Golf-MK7-5-GTi-Cat-Back-Race-Non-Resonated-Exhaust-2017-to-2018-01-qa Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2017 to 2018

    Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2017 to 2018
    Price Shown is at least 10% off the RRP. Volkswagen Golf MK7.5 GTi (Non Performance Pack Models & Non-GPF Equipped Models Only) 2017 to 2018. Cat Back Race Non-Resonated GT-100 Burnt Titanium Trims. MSVW402REP: Front Silencer Bypass Pipe. MSVW403: Centre Silencer Assembly. MSVW474: Rear Silencer Bypass. MSVW476 x2: Trim Extension Pipes. MSTIP194 x2: Burnt Titanium GT-100 Trims. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Material: T304 Stainless Steel
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXVW467
    • Manufacturer Part Number: SSXVW467
    • Other Part Number: SSXVW467
    • Brand: Milltek

    Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2017 to 2018

    Tags: , , , , , ,

  • milltek Comments Off
    Milltek-VW-Golf-MK7-5-GTi-Cat-Back-Race-Non-Resonated-Exhaust-2019-On-Burnt-Trim-01-fgwe Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2019 On Burnt Trim

    Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2019 On Burnt Trim
    Price Shown is at least 10% off the RRP. Volkswagen Golf MK7.5 GTi (TCR & Performance Pack Models – GPF/OPF Equipped Models Only) 2019 Onwards. Cat Back Race Non-Resonated GT-100 Burnt Titanium Trims. MSVW402REP: Front Silencer Bypass Pipe. MSVW403: Centre Silencer Assembly. MSVW474: Rear Silencer Bypass. MSVW476 x2: Trim Extension Pipes. MSTIP194 x2: Burnt Titanium GT-100 Trims. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Material: T304 Stainless Steel
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXVW467
    • Manufacturer Part Number: SSXVW467
    • Other Part Number: SSXVW467
    • Brand: Milltek

    Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2019 On Burnt Trim

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-Honda-Civic-Type-R-FK8-Cat-Back-Exhaust-Non-Resonated-Race-SSXHO250-01-wio Milltek Honda Civic Type R FK8 Cat Back Exhaust Non-Resonated Race SSXHO250

    Milltek Honda Civic Type R FK8 Cat Back Exhaust Non-Resonated Race SSXHO250
    Price Shown is at least 10% off the RRP. Honda Civic Type R FK8 2.0 i-VTEC 2017 and Later. Non-Resonated Race with 3 x Carbon Jet-100 Trims. MSHO132: Front Connecting Pipe. MSHO133REP: Front Silencer Replacement Pipe. MSHO134REP: Centre Silencer Replacement Pipe. MSHO135: Rear Connecting Pipe. MSHO136: HollowTek Rear Silencer. MSTIP226 x3: Jet-100 Carbon Trims. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, United States, Australia, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Egypt, Guadeloupe, French Guiana, Jordan, Cambodia, Sri Lanka, Macau, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Bahamas, Colombia, Jamaica, Kuwait, Panama, Philippines, Qatar, Uruguay, Vietnam.
    • Non-Domestic Product: No
    • Material: T304 Stainless Steel
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Interchange Part Number: SSXHO250
    • Manufacturer Part Number: SSXHO250
    • Other Part Number: SSXHO250
    • Brand: Milltek

    Milltek Honda Civic Type R FK8 Cat Back Exhaust Non-Resonated Race SSXHO250

    Tags: , , , , , , , ,

« Previous Entries