Race Exhaust Back

• 09May

  VW Golf MK7.5 R Milltek Non Valved Race Cat Back Exhaust Non Res Burnt Titanium

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK7.5 R Milltek Non Valved Race Cat Back Exhaust Non Res Burnt Titanium. VW Golf MK7.5 R Milltek Sport Performance Non Valved Race Cat Back Exhaust System Non Resonated Burnt Titanium GT100 Round Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System. Milltek Sport Cat Back Exhaust System. Burnt Titanium GT-100 Round Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of silencers. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Parts Included in SSXVW590. MSAU618REP: Centre Silencer Pipe. MSVW467: Rear Silencer (non-valved). MSTIP194 x4: Burnt Titanium GT-100 Trims. Pipe Diameter Ø: 3.00-inch (76.20mm) Tip Style: Quad 100mm GT100. Fits: Volkswagen Golf MK7.5 R 2.0 TSI 300PS (GPF Equipped Models Only) 2019 and later Volkswagen Golf Mk7.5 R 2.0 TSI 310PS (Non-GPF Equipped Models Only) 2017 and Later. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Performance and Genuine OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW590
  • Material: Stainless Steel
  • Classic Part: No
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom
  • Mounting Style: Clamp-On

  
  
  

  Tags: back, burnt, exhaust, golf, milltek, mk75, race, titanium, valved

• 27Apr

  VW Golf MK6 R 2.0 TSI Milltek 3” Race Cat Back Exhaust Non Res + Titanium Tips

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK6 R 2.0 TSI Milltek 3” Race Cat Back Exhaust Non Res + Titanium Tips. VW Golf MK6 R 2.0 TSI Milltek Sport 3 Race Cat Back Exhaust Titanium Tips Non Resonated. Genuine Brand New Milltek 3 Race Non Resonated Cat Back Exhaust System. Milltek Sport 3 Race Cat Back Exhaust System. Twin 100mm GT100 Titanium Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXVW219 Race Cat Back System. MSVW399REP Centre Silencer Replacement Pipe. MSVW400 Rear Silencer Assembly (no valve). MSVW374 x2 Titanium Tips Dual GT100. Pipe Diameter: 3.00-inch (76.20mm). We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Performance and Genuine OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW219
  • Material: Stainless Steel
  • Classic Part: No
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom
  • Mounting Style: Clamp-On
  • Type: Cat Back Exhaust System

  
  
  

  Tags: back, exhaust, golf, milltek, race, tips, titanium

• 08Feb

  VW Golf MK3 GTI VR6 Corrado VR6 Jetex Exhaust Race Performance Upgrade Silencer

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK3 GTI VR6 Corrado VR6 Jetex Exhaust Race Performance Upgrade Silencer. VW Golf MK3 GTI VR6 Corrado Jetex Exhaust Front Silencer Race Pipe Performance Upgrade. Brand New 100% Genuine Jetex Race Pipe. Performance Race Pipe made of Stainless Steel. Replaces the Jetex front silencer, changes system to non resonated. Pipe Size 2.5inch or 63.5mm. (intended for fitment to Jetex Exhaust systems but may fit others with modification or with the right joiner/clamps). About Jetex Performance Exhausts. Jetex Performance Exhausts, Since 1986. With 30 years of exhaust design and development experience, Jetex has gained a reputation for producing exhausts that are well-engineered, perform consistently and create a perfect harmony between car and exhaust. Fits Golf MK3 All Models inc. 16V/VR6 & Corrado inc 16v & VR6. (variant models such as estate or Syncro may require some modifications). See the shop for Cat Back Exhaust Systems plus 1000s more Genuine Performance & OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Type: Cat Back Exhaust Kit
  • Items Included: Clamp, Gasket, Pipe, Silencer, Tip
  • Features: Cat Back
  • Placement on Vehicle: Rear
  • Material: Stainless Steel
  • Mounting Style: Bolt-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Manufacturer Warranty: 1
  • Brand: Jetex Performance Exhausts

  
  
  

  Tags: corrado, exhaust, golf, jetex, performance, race, silencer, upgrade

• 07Feb

  VW Golf MK6 R 2.0 TSI Milltek Sport 3” Race Cat Back Exhaust GT100 Titanium Tip

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK6 R 2.0 TSI Milltek Sport 3” Race Cat Back Exhaust GT100 Titanium Tip. VW Golf MK6 R 2.0 TSI Milltek Sport 3 Race Cat Back Exhaust GT100 Titanium Tips. Genuine Brand New Milltek 3 Race Resonated Cat Back Exhaust System. Milltek Sport Race Resonated Cat Back Exhaust System. Twin 100mm GT100 Titanium Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Quieter – this is a resonated system, quieter than non resonated, if you want the louder non resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXVW222 Cat Back System. MSVW399: Centre Silencer Assembly. MSVW400: Rear Silencer Assembly (no valve). MSVW374 x2: Titanium Tips Dual GT100. Pipe Diameter: 3.00-inch (76.20mm). We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine OEM & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW222
  • Material: Stainless Steel
  • Classic Part: No
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom
  • Mounting Style: Clamp-On
  • Type: Cat Back Exhaust System

  
  
  

  Tags: back, exhaust, golf, gt100, milltek, race, sport, titanium

• 11Jan

  VW Golf MK7 R Milltek Race Non Valved Non Res Cat Back Exhaust Burnt Titanium GT

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK7 R Milltek Race Non Valved Non Res Cat Back Exhaust Burnt Titanium GT. Genuine Brand New Milltek Sport 3 Race Non Valved Non Resonated Cat Back Exhaust System. Race Non Valved Non Resonated Cat Back Exhaust System. 4x Burnt Titanium GT100 Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Valve motor from the OE exhaust is not used on this system – For valved systems please see other listings. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Cat Back System SSXVW410 Includes. MSAU618REP: Centre Silencer Pipe. MSVW441: Rear Silencer (non-valved). MSTIP194 x4: Burnt Titanium Tips. Pipe Diameter Ø: 3.00-inch (76.20mm) Tip Style: Quad 100mm GT100. Please Note: Pictures for illustration purposes only, you will receive Burnt Titanium Tips with this system, not Polished as pictured. (picture will be updated soon to show the correct tips). Fits: VW Golf MK7 R 300PS 2013> Valve motor from the OE exhaust is NOT required for fitment. Please Note: Pictures for illustration purposes only, you will receive Burnt Titanium Tips with the system. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Want to see a video of this system in action? The check this out. Check out the shop for 1000’s more Genuine OEM & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW410
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: back, burnt, exhaust, golf, milltek, race, titanium, valved

• 03Jan

  VW Golf MK7 R Milltek Race Non Valved Res Cat Back Exhaust 4x Burnt Titanium GT

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK7 R Milltek Race Non Valved Res Cat Back Exhaust 4x Burnt Titanium GT. Genuine Brand New Milltek Sport 3 Race Non Valved Resonated Cat Back Exhaust System. Race Non Valved Resonated Cat Back Exhaust System. 4x Burnt Titanium GT100 Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Valve motor from the OE exhaust is not used on this system – For valved systems please see other listings. Quieter – this is a resonated system, quieter than non resonated, if you want the louder non resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Cat Back System SSXVW414 Includes. MSVW441: Rear Silencer (non-valved). MSTIP194 x4: Burnt Titanium Tips. Tip Style: Quad 100mm GT100 Pipe Diameter Ø: 3.00-inch (76.20mm). Fits: VW Golf MK7 R 300PS 2013> Valve motor from the OE exhaust is NOT required for fitment. Please Note: Pictures for illustration purposes only, you will receive Burnt Titanium Tips. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine OEM & Performance Parts. Want to see a video of this system in action? The check this out. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW414
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: back, burnt, exhaust, golf, milltek, race, titanium, valved

• 24Dec

  VW Golf MK7.5 R Milltek Non Valved Race Cat Back Exhaust Res Polished GT100 Tips

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK7.5 R Milltek Non Valved Race Cat Back Exhaust Res Polished GT100 Tips. VW Golf MK7.5 R Milltek Sport Performance Non Valved Race Cat Back Exhaust System Resonated Polished GT100 Round Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System. Milltek Sport Cat Back Exhaust System. Polished GT100 Round Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Quieter – this is a resonated system, quieter than non resonated, if you want the louder non resonated system see other listing. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of silencers. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Parts Included in SSXVW583. MSVW467: Rear Silencer (non-valved). MSVW373 x4: Polished Tips. Pipe Diameter Ø: 3.00-inch (76.20mm) Tip Style: Quad 100mm GT100. Fits: Volkswagen Golf MK7.5 R 2.0 TSI 300PS (GPF Equipped Models Only) 2019 and later Volkswagen Golf Mk7.5 R 2.0 TSI 310PS (Non-GPF Equipped Models Only) 2017 and Later. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Performance and Genuine OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW583
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: back, exhaust, golf, gt100, milltek, mk75, polished, race, tips, valved

• 05Dec

  VW Golf MK7 R MILLTEK 3? Race Non Valved Res Cat Back Exhaust 4x Titanium GT100

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK7 R MILLTEK 3′ Race Non Valved Res Cat Back Exhaust 4x Titanium GT100. Genuine Brand New Milltek 3 Race Non Valved Resonated Cat Back Exhaust System. 4x Titanium GT100 Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Valve motor from the OE exhaust is not used on this system – For valved systems please see other listings. Quieter – this is a resonated system, quieter than non resonated, if you want the louder non resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high performance parts that will in most cases out live the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Cat Back System SSXVW413 Includes. MSVW441 Rear Silencer (non-valved). MSVW374 x4 Titanium Tips Quad 100mm GT100. Pipe Diameter Ø: 3.00-inch (76.20mm). Fits: VW Golf MK7 R 300PS 2013> Valve motor from the OE exhaust is NOT required for fitment. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 100’s more Genuine VW & Performance Parts inc Valve Modules. Want to see a video of this system in action? The check this out. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW413
  • Material: Stainless Steel
  • Classic Part: No
  • Country/Region of Manufacture: United Kingdom
  • Performance Part: Yes
  • Universal Fitment: No
  • Mounting Style: Clamp-On
  • Type: Cat Back Exhaust System

  
  
  

  Tags: back, exhaust, golf, gt100, milltek, race, titanium, valved

• 05Dec

  VW Golf MK7.5 R Milltek Non Valved Race Cat Back Exhaust Non Res Polished Tips

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK7.5 R Milltek Non Valved Race Cat Back Exhaust Non Res Polished Tips. VW Golf MK7.5 R Milltek Sport Performance Non Valved Race Cat Back Exhaust System Non Resonated Polished GT100 Round Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System. Milltek Sport Cat Back Exhaust System. Polished GT100 Round Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of silencers. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Parts Included in SSXVW602. MSAU618REP: Centre Silencer Pipe. MSVW467: Rear Silencer (non-valved). MSVW373 x4: Polished Tips. Pipe Diameter Ø: 3.00-inch (76.20mm) Tip Style: Quad 100mm GT100. Fits: Volkswagen Golf MK7.5 R 2.0 TSI 300PS (GPF Equipped Models Only) 2019 and later Volkswagen Golf Mk7.5 R 2.0 TSI 310PS (Non-GPF Equipped Models Only) 2017 and Later. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Performance and Genuine OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW602
  • Material: Stainless Steel
  • Classic Part: No
  • Country/Region of Manufacture: United Kingdom
  • Performance Part: Yes
  • Universal Fitment: No
  • Mounting Style: Clamp-On

  
  
  

  Tags: back, exhaust, golf, milltek, mk75, polished, race, tips, valved

• 25Nov

  VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips

  golf Comments Off
  
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips. VW Golf MK5 GTI 2.0T Edition 30 Milltek Sport 3 Race Cat Back Exhaust Non Resonated Black Tips. Genuine Brand New Milltek 3 Race Non Resonated Cat Back Exhaust System. Milltek Sport Race Non Resonated Cat Back Exhaust System. Twin 80mm GT80 Cerakote Black Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXVW282 Cat Back System. MSVW367: Adaptor to standard OEM downpipe. MSVW352REP: Non-resonated Centre Section. MSVW430: Race Rear Silencer. MSTIP158 x2: Cerakote Black Tips. Pipe Diameter: 3.00-inch (76.20mm). Fits: VW Golf Mk5 GTi 2.0T FSI, GTi Edition 30 2.0T FSi 230PS. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 100’s more Genuine VW & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW282
  • Material: Stainless Steel
  • Classic Part: No
  • Country/Region of Manufacture: United Kingdom
  • Performance Part: Yes
  • Universal Fitment: No
  • Mounting Style: Clamp-On
  • Type: Cat Back Exhaust System

  
  
  

  Tags: back, black, edition, exhaust, golf, milltek, race, tips

« Previous Entries