Race Exhaust Back

• 02Feb

  Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Burnt Titanium Oval

  audi Comments Off
  
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Burnt Titanium Oval. Audi RS5 B9 Turbo Coupe Milltek Sport Race Non Resonated Cat Back Exhaust System Burnt Titanium Oval Trims. Genuine Brand New Milltek Sport Race Non Resonated Cat Back Exhaust System. Milltek Sport Race Non Resonated Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Burnt Titanium Oval Trims. Louder – This is a non resonated system, louder than resonated. If you want the quieter resonated system please see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXAU812 Cat Back System. MSAU723: LH Lower Downpipe. MSAU724: RH Lower Downpipe. MSAU725REP: Front Silencer Replacement Pipe. MSAU727REP: Centre Silencer Replacement Pipe. MSAU728: LH Rear Silencer (Race) Valved. MSAU729: RH Rear Silencer (Race) Valved. MSVS032 x2: Valve Extension Cables. MSTIP257: LH Burnt Titanium Oval Trim (170×107). MSTIP258: RH Burnt Titanium Oval Trim (170×107). Pipe Ø: 2.76? We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine OEM and Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Type: Cat Back Exhaust Kit
  • Items Included: Muffler, Clamp, Pipe, Tip
  • Features: 100% Accuracy of Fit, Easy to Replace, Cat Back
  • Placement on Vehicle: Rear Bumper, Rear, Lower
  • Manufacturer Part Number: SSXAU812
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom
  • Manufacturer Warranty: Lifetime

  
  
  

  Tags: audi, back, burnt, coupe, exhaust, milltek, oval, race, sport, titanium, turbo

• 01Feb

  Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Polished Oval

  audi Comments Off
  
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi RS5 B9 Turbo Coupe Milltek Sport Race Cat Back Exhaust Polished Oval. Audi RS5 B9 Turbo Coupe Milltek Sport Race Non Resonated Cat Back Exhaust System Polished Oval Trims. Genuine Brand New Milltek Sport Race Non Resonated Cat Back Exhaust System. Milltek Sport Race Non Resonated Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – This is a non resonated system, louder than resonated. If you want the quieter resonated system please see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXAU756 Cat Back System. MSAU723: LH Lower Downpipe. MSAU724: RH Lower Downpipe. MSAU725REP: Front Silencer Replacement Pipe. MSAU727REP: Centre Silencer Replacement Pipe. MSAU728: LH Rear Silencer (Race) Valved. MSAU729: RH Rear Silencer (Race) Valved. MSVS032 x2: Valve Extension Cables. MSTIP240: LH Polished Oval Trim (170×107). MSTIP241: RH Polished Oval Trim (170×107). Pipe Ø: 2.76? We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine OEM and Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Type: Cat Back Exhaust Kit
  • Items Included: Muffler, Clamp, Pipe, Tip
  • Features: 100% Accuracy of Fit, Easy to Replace, Cat Back
  • Placement on Vehicle: Rear Bumper, Rear, Lower
  • Manufacturer Part Number: SSXAU756
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom
  • Manufacturer Warranty: Lifetime

  
  
  

  Tags: audi, back, coupe, exhaust, milltek, oval, polished, race, sport, turbo

• 28Jan

  Audi S3 8V Quattro 2.0TFSI Milltek Res Cat Back Non Valved Race Exhaust Polished

  audi Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi S3 8V Quattro 2.0TFSI Milltek Res Cat Back Non Valved Race Exhaust Polished. Audi S3 8V Quattro 2.0TFSI Milltek Sport Resonated Cat Back Non Valved Race Exhaust System x4 Oval Polished Tips. Genuine Brand New Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. X4 Oval Polished Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. Quieter – (this is a resonated system, quieter than non resonated, if you want the louder non resonated system please see other listing). You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXAU545 Cat Back Exhaust System. MSAU653: Rear Silencer (non valved). MSAU647 x4: Tip Outlet Pipes. MSTIP161 x4: Polished Oval Tips. Pipe Diameter Ø: 3.00-inch (76.20mm). Fits: Audi S3 2.0 TFSI quattro Saloon & Cabrio 8V (Non-GPF Equipped Models Only) 2013 to 2018. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Performance and Genuine OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXAU545
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: 20tfsi, audi, back, exhaust, milltek, polished, quattro, race, valved

• 27Jan

  Audi S3 8V Quattro 2.0TFSI Milltek Res Cat Back Non Valved Race Exhaust Polished

  audi Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi S3 8V Quattro 2.0TFSI Milltek Res Cat Back Non Valved Race Exhaust Polished. Audi S3 8V Quattro 2.0TFSI Milltek Sport Resonated Cat Back Non Valved Race Exhaust System x4 Round Polished Tips. Genuine Brand New Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. X4 Round Polished Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. Quieter – (this is a resonated system, quieter than non resonated, if you want the louder non resonated system please see other listing). You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXAU547 Cat Back Exhaust System. MSAU653: Rear Silencer (non valved). MSAU647 x4: Tip Outlet Pipes. MSVW373 x4: Polished Tips. Please note pictures are for illustration purposes only. You will receive items listed above. Pipe Diameter Ø: 3.00-inch (76.20mm) Tip Style: Quad 100mm GT100. Fits: Audi S3 2.0 TFSI quattro Saloon & Cabrio 8V (Non-GPF Equipped Models Only) 2013 to 2018. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Performance and Genuine OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXAU547
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: 20tfsi, audi, back, exhaust, milltek, polished, quattro, race, valved

• 18Jan

  Audi A6 C5 2.5TDi V6 Diesel Exhaust Cat Back 4B0253609E

  audi Comments Off
  
  
  
  
  The New and Used Audi parts supplier. Audi A6 C5 2.5TDi V6 Diesel Exhaust Cat Back 4B0253609E. Audi Part Number: 4B0 253 609 E. Our Stock Number: 97469. Donor Car: 1999 Audi A6 2500cc. Donor Car Colour: Bodywork is Lz6H Racing Green. Interior trim is Mushroom N3N Bx. Please Note: Some corrosion to the outer casing of the centre box where the pipe enters. We work Monday to Friday 09:00-17:00 so please allow us time to answer your question. If in doubt please ask a question on the item and provide us with your Postal Code. Please Note: Compatibility is provided on some listings to give an indication of some of the cars this part may fit. It may fit others. Regardless of the listing details, fitment can vary due to engine type, body style and factory fitted options. Autolister v2.0, html code version 1.08 27/12/13 16:56, Listing uploaded 13/01/23 22:45:39, EpisModel 0. VehicleID:400, ChassisID:4B. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “a8parts” and is located in this country: GB. This item can be shipped to United Kingdom.

  • Grade: A
  • Vehicle Make: Audi
  • Vehicle Model: A6 C5 Saloon
  • Vehicle Chassis: 4B
  • Engine Code: AFB
  • Gearbox Code: DEQ
  • Paint Code: LZ6H Racing Green
  • Vehicle Year: 1999
  • Model Years: 1997-2005
  • Engine Details: 2496cc 110KW 150HP
  • Brand: Audi (Genuine OE)
  • Manufacturer Part Number: 4B0253609E

  
  
  

  Tags: 25tdi, 4b0253609e, audi, back, diesel, exhaust

• 18Jan

  Audi S3 8V 3-Door Milltek Race Res Non Valved Cat Back Exhaust 4x Black Oval Tip

  audi Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi S3 8V 3-Door Milltek Race Res Non Valved Cat Back Exhaust 4x Black Oval Tip. Genuine Brand New Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. 4x Black Oval Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Race System – Non Valved. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. Quieter – (this is a resonated system, quieter than non resonated, if you want the louder non resonated system please see other listing). You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXAU525 Cat Back System. MSAU653: Rear Silencer (non-valved). MSTIP162 x4: Cerakote Black Oval Tips. Pipe Diameter Ø: 3.00-inch (76.20mm). Fits: Audi S3 8V Quattro 2013> 3-Door Only. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine OEM & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXAU525
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: 3-door, audi, back, black, exhaust, milltek, oval, race, valved

• 16Jan

  Audi S3 8V Quattro 2.0TFSI Milltek Res Cat Back Non Valved Race Exhaust Titanium

  audi Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi S3 8V Quattro 2.0TFSI Milltek Res Cat Back Non Valved Race Exhaust Titanium. Audi S3 8V Quattro 2.0TFSI Milltek Sport Resonated Cat Back Non Valved Race Exhaust System x4 Round Titanium Tips. Genuine Brand New Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. X4 Round Titanium Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. Quieter – (this is a resonated system, quieter than non resonated, if you want the louder non resonated system please see other listing). You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXAU548 Cat Back Exhaust System. MSAU653: Rear Silencer (non valved). MSAU647 x4: Tip Outlet Pipes. MSVW374 x4: Titanium Tips. Pipe Diameter Ø: 3.00-inch (76.20mm) Tip Style: Quad 100mm GT100. Fits: Audi S3 2.0 TFSI quattro Saloon & Cabrio 8V (Non-GPF Equipped Models Only) 2013 to 2018. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Performance and Genuine OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXAU548
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: 20tfsi, audi, back, exhaust, milltek, quattro, race, titanium, valved

• 13Jan

  Audi S3 8V Quattro 2.0TFSI Milltek Res Cat Back Non Valved Race Exhaust Black

  audi Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi S3 8V Quattro 2.0TFSI Milltek Res Cat Back Non Valved Race Exhaust Black. Audi S3 8V Quattro 2.0TFSI Milltek Sport Resonated Cat Back Non Valved Race Exhaust System x4 Round Cerakote Black Tips. Genuine Brand New Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. Milltek Sport Resonated Cat Back Non Valved Race Exhaust System. X4 Round Cerakote Black Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. Quieter – (this is a resonated system, quieter than non resonated, if you want the louder non resonated system please see other listing). You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXAU546 Cat Back Exhaust System. MSAU653: Rear Silencer (non valved). MSAU647 x4: Tip Outlet Pipes. MSVW372 x4: Cerakote Black Tips. Pipe Diameter Ø: 3.00-inch (76.20mm) Tip Style: Quad 100mm GT100. Please note pictures are for illustration purposes only. You will receive items listed above. Fits: Audi S3 2.0 TFSI quattro Saloon & Cabrio 8V (Non-GPF Equipped Models Only) 2013 to 2018. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s Performance and Genuine OEM Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXAU546
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: 20tfsi, audi, back, black, exhaust, milltek, quattro, race, valved

• 10Jan

  Audi S5 3.0 TFSI B8 Milltek Sport Race Version Cat Back Exhaust Quad Polished

  audi Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi S5 3.0 TFSI B8 Milltek Sport Race Version Cat Back Exhaust Quad Polished. Audi S5 3.0 TFSI B8 Milltek Sport Race Version Cat Back Exhaust System Quad Polished Tips. Genuine Brand New Milltek Sport Race Version Cat Back Exhaust System. Milltek Sport Race Version Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Not Recommended For Road Use. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts In SSXAU265 Cat Back Exhaust System. MSAU512: Front Silencer Assembly. MSAU464: Centre Silencer Assembly. MSAU467: LH Rear Silencer Pipe. MSAU468: RH Rear Silencer Pipe. MSAU505: LH Polished Trim Assembly. MSAU506: RH Polished Trim Assembly. Pipe Diameter Ø: 2.37-inch (60.30mm) Tip Style: Twin 80mm GT-80. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine VW/Audi & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXAU265
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: audi, back, exhaust, milltek, polished, quad, race, sport, tfsi, version

• 20Dec

  Audi S4 S5 3.0 B8 Milltek Sport Cat Back Exhaust Race Version x4 Cerakote Black

  audi Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi S4 S5 3.0 B8 Milltek Sport Cat Back Exhaust Race Version x4 Cerakote Black. Audi S4 S5 3.0 B8 Milltek Sport Cat Back Exhaust System Race Version x4 Cerakote Black Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System Race Version. Milltek Sport Cat Back Exhaust System Race Version. Quad Cerakote Black Tips. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts In SSXAU557 Cat Back Exhaust System. MSAU463: Front Silencer Assembly. MSAU464: Centre Silencer Assembly. MSAU467: LH Rear Silencer Pipe. MSAU468: RH Rear Silencer Pipe. MSTIP211: LH Cerakote Black Trim Assembly. MSTIP212: RH Cerakote Black Trim Assembly. Pipe Diameter Ø: 2.37-inch (60.30mm) Tip Style: Twin 80mm GT80. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine VW/Audi & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXAU557
  • Material: Stainless Steel
  • Classic Part: No
  • Mounting Style: Clamp-On
  • Universal Fitment: No
  • Performance Part: Yes
  • Country/Region of Manufacture: United Kingdom

  
  
  

  Tags: audi, back, black, cerakote, exhaust, milltek, race, sport, version

« Previous Entries