November 2022
« Oct    
  • Cobra-Mazda-MX-5-ND-Mk4-Race-Rear-Axle-Back-Exhaust-2015-on-MZ21-01-ootx Cobra Mazda MX 5 ND Mk4 Race Rear Axle Back Exhaust 2015 on MZ21
    Cobra Mazda MX 5 ND Mk4 Race Rear Axle Back Exhaust 2015 on MZ21

    Cobra Mazda MX 5 ND Mk4 Race Rear Axle Back Exhaust 2015 on MZ21
    Price Shown is at least 10% off the RRP. MODEL – MX-5 (ND) Mk4. YEAR – 2015 0n. PART DESCRIPTION – Race Rear Axle Back Performance Exhaust. BORE SIZE – 2.5/63.5mm. PART NUMBER – MZ21. TAIL PIPE OPTIONS – (some options incur additional cost, these are shown in brackets). If no option is requested, we will send the most suited and popular version for your vehicle, which is usually the tip shown in the main image. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. The Cobra Sport race type rear axle back for the MX-5 ND is the perfect upgrade for the motorist that requires more feel and emotion from their drive without breaking the bank. Offering the simplest solution to enhanced sound, the Cobra Sport race type axle back system replaces the stock rear silencer of the MX-5 with a free flowing stainless steel silencer unlocking a feeling of audible emotion as the ND accelerates through the rev range. Whilst providing the perfect Sunday soundtrack the Cobra Sport system also boasts a visual upgrade to make the rear of the ND stand out with optional carbon fibre tailpipes for those really wishing to make an entrance. This Mk4 Mazda MX-5 (ND) performance exhaust is made in 2.5/63.5mm pipework and fits from the centre section backwards, replacing the rear section only. Sound test results (1.5L RF): Engine at Idle: 68.7dB (+5dB) – Static 4,000rpm test: 93.1dB (+9.2dB). All relevant fittings and gaskets are supplied. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country. Please note – Some systems will be made to order, please allow time for your system to be made. Found this system cheaper elsewhere? Mandrel bends for optimum flow. Remapping is recommended when purchasing / fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sport cats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. How are your exhausts made? All of our exhausts are made from aircraft grade 304 stainless steel and constructed using precision TIG welding with mandrel formed bends in the pipe work for a smoother gas flow. We pride ourselves in producing high quality products. What sound can I expect from your exhausts? Our exhausts will have a more sporty tone than original equipment exhausts. This is an inevitable result of the less restrictive systems we produce. However, with careful design and production methods, we aim to keep a subtle sporty tone. If you prefer a loud system, then one of our non-resonated (no centre box) exhaust systems will provide a louder exhaust note. Many of our products feature a movie of the exhaust and give some idea as to the sound which you can expect. What power gains can I expect to achieve? Of course this varies from engine to engine, our systems are designed and manufactured to maximize gas flow with increased diameter pipe work, free flowing silencers and mandrel bends which provide a much less restrictive exhaust system than original equipment exhausts, resulting in a much better engine response and increased BHP. Typically you can expect to achieve around a 10% increase from the installation of a cat-back system. Some individual products also show approximate power gains. Is it legal to put a de-cat pipe on my car? You can only de-cat your car if it was registered prior to 1992, otherwise it will fail the emissions check at your MOT station. Will my car need remapping? If you are fitting a cat back system to your car, this will have no effect on the engine management operations. However, if you are replacing your original system with a de-cat, sports cat or front pipe your car may need remapping as it may cause the vehicles engine management light to activate. What is the difference between resonated and non-resonated systems? Resonators are box chambers incorporated into the exhaust system, which are used to make the exhaust quieter, by cancelling certain sound frequencies. A non-resonated exhaust system will therefore, give a louder exhaust note and a resonated exhaust system, a quieter exhaust note. Either option will still provide extra performance. What is a Slash-Cut tailpipe? Slash-cut tailpipes are finished and cut off at a 15 degree angle, and suit certain types of vehicles depending upon the shape of the bumper and overall aesthetics of the vehicle. If you require any advice on which tailpipe would be most appropriate for your car, please give us a call. What will be the finish of my exhaust? All our exhausts come with highly polished mirror finish tailpipes and rear boxes. All other pipework and gaskets etc, will be a matt polished finish. How do I keep my exhaust looking like new? If you do not clean your exhaust/tailpipe, it will eventually become discoloured and be more difficult to bring back to its original finish. Regular cleaning with a non-abrasive metal polish such as Solvol AutosolĀ® will ensure that your exhaust continues to look as new. As a company we are committed to continuous improvement and investing in new developments, with a keen focus on quality and service our loyal highly trained team are always happy to help. The production facilities at Cobra Sport exhausts enables us to produce exhausts in high volume and having worked with clients such as Subaru UK, Isuzu UK and Ginetta Cars to name but a few. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, Japan, Australia, Bahrain, New Zealand, Hong Kong, Indonesia, Malaysia, Singapore, Taiwan, Thailand, Bangladesh, Brunei Darussalam, Jordan, Sri Lanka, Macau, Maldives, Saudi Arabia, United Arab Emirates, Kuwait, Philippines, Vietnam.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Interchange Part Number: MZ21
    • Warranty Period: LIFETIME (CONDITIONS APPLY)
    • Unit Quantity: 1
    • Grade: T304 STAINLESS STEEL
    • Manufacturer Part Number: MZ21
    • Classic Car Part: No
    • Other Part Number: MZ21
    • Brand: Cobra Sport

    Cobra Mazda MX 5 ND Mk4 Race Rear Axle Back Exhaust 2015 on MZ21

    Posted by admin @ 6:08 am

    Tags: , , , , , , ,

Comments are closed.