WP_Cloudy

Section

Archive

  • milltek Comments Off
    Milltek-Audi-S3-8v-3-Door-RACE-Exhaust-3-NON-VALVED-Non-Res-Black-Oval-SSXAU520-01-wuu Milltek Audi S3 8v 3-Door RACE Exhaust 3 NON VALVED Non Res Black Oval SSXAU520
    Milltek Audi S3 8v 3-Door RACE Exhaust 3 NON VALVED Non Res Black Oval SSXAU520
    Milltek Audi S3 8v 3-Door RACE Exhaust 3 NON VALVED Non Res Black Oval SSXAU520

    Milltek Audi S3 8v 3-Door RACE Exhaust 3 NON VALVED Non Res Black Oval SSXAU520
    BRAND NEW MILLTEK STAINLESS STEEL 3 CAT BACK RACE SYSTEM NON VALVED NON RESONATED SYSTEM TO FIT AUDI S3 2.0 TFSI QUATTRO 3-DOOR 8V 2013 ON. A Brand New Milltek Stainless Steel. Cat Back – Non Valved. (Non Resonated – Louder). Audi S3 2.0 TFSi Quattro 3-Door. Centre Silencer Delete Pipe. Cerakote Black Velvet Oval Tips Quad. 3.00-inch (76.20mm). The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek are the exhaust specialists! Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge – noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49. PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Manufacturer Part Number: SSXAU520
    • Brand: Milltek
    • Other Part Number: SSXAU520
    • Type: Exhaust
    • Part Manufacturer: Milltek
    • Part Manufacturer Number: SSXAU520
    • Manufacturer: Audi
    • Make: Milltek
    • Intended Use: Modification/ Enhancement
    • Model/ Series: S3 2.0 TFSi Quattro 3-Door 8v 2013 on
    • Subtype: 3\
    • SYSTEM TYPE:: Race System – Non Valved – Non Resonated
    • TAILPIPE:: Cerakote Black Velvet Oval Tips – Quad
    • IMPORTANT NOTE:: Non-Resonated – LOUDER
    • IMPORTANT NOTE 2:: 3 Door Hatch Only

    Milltek Audi S3 8v 3-Door RACE Exhaust 3 NON VALVED Non Res Black Oval SSXAU520

    Tags: , , , , , , , ,

  • cherry Comments Off
    2x-Cherry-Bombs-Slash-Cut-Red-3-5-Rear-Silencer-Mtg-Bracket-Reducer-01-cej 2x Cherry Bombs Slash Cut Red 3.5 Rear Silencer + Mtg + Bracket + Reducer

    2x Cherry Bombs Slash Cut Red 3.5 Rear Silencer + Mtg + Bracket + Reducer
    Custom Chrome Racing 2x Cherry Bombs Slash Cut Red 3.5 Rear Silencer + Mounting + Bracket + Reducer. If it doesn’t have the Cherry Bomb sticker it is a fake. Will pass the MOT and comes with our extended 5 year guarantee. Universal Fitment – will fit most cars and light commercial vehicles but may need other parts, an experienced fitter and modifications to fit some vehicles. Technical Specification Tail Pipe Style: Slash Cut, Total Length: 22.5″ 56cm, Silencer Length: 12″ 30cm, Silencer Diameter(O/D): 3.5″ 9cmTail Pipe(O/D): 68mm x 84mm Oval, Connecting Pipe(O/D): 54mm (2 1/8″). Any information in the compatibility table is for reference only and there may be unspecified choice options. Any fitting marks or blemishes will result in your return being rejected. If a part is faulty a replacement will be sent out after the return and testing of the old unit. Labour claims & consequential loss claims are never accepted. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “rtgroup11″ and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Bahrain, Canada, Brazil, Japan, New Zealand, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Uruguay, Vietnam, Israel.
    • Reference OE/OEM Number: Oval End Exhaust Chrome Tip Stepped, Back Box Universal custom Rear Back
    • Brand: Custom Chrome Racing
    • Manufacturer Part Number: CB3x2+101×2+102×2+103×2
    • Placement on Vehicle: Rear
    • Type: Exhaust
    • Subtype:: Silencers/ Muffers

    2x Cherry Bombs Slash Cut Red 3.5 Rear Silencer + Mtg + Bracket + Reducer

    Tags: , , , , , ,

  • cherry Comments Off
    2x-Cherry-Bomb-Slash-Cut-Black-3-5-Rear-Silencer-Brackets-5-YEAR-WARRANTY-01-tk 2x Cherry Bomb Slash Cut Black 3.5 Rear Silencer + Brackets 5 YEAR WARRANTY

    2x Cherry Bomb Slash Cut Black 3.5 Rear Silencer + Brackets 5 YEAR WARRANTY
    Custom Chrome Racing 2x Cherry Bomb Slash Cut Black 3.5 Rear Silencer + Brackets. If it doesn’t have the Cherry Bomb sticker it is a fake. Will pass the MOT and comes with our extended 5 year guarantee. Universal Fitment – will fit most cars and light commercial vehicles but may need other parts, an experienced fitter and modifications to fit some vehicles. Technical Specification Tail Pipe Style: Slash Cut, Total Length: 22.5″ 56cm, Silencer Length: 12″ 30cm, Silencer Diameter(O/D): 3.5″ 9cmTail Pipe(O/D): 68mm x 84mm Oval, Connecting Pipe(O/D): 54mm (2 1/8″). Any information in the compatibility table is for reference only and there may be unspecified choice options. Any fitting marks or blemishes will result in your return being rejected. If a part is faulty a replacement will be sent out after the return and testing of the old unit. Labour claims & consequential loss claims are never accepted. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “rtgroup11″ and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Uruguay, Vietnam.
    • Reference OE/OEM Number: Oval End Exhaust Chrome Tip, Stepped Rear Back Box Universal custom
    • Brand: Custom Chrome Racing
    • Manufacturer Part Number: CB4x2+101×2
    • Placement on Vehicle: Rear
    • Type: Exhaust
    • Subtype:: Silencers/ Muffers

    2x Cherry Bomb Slash Cut Black 3.5 Rear Silencer + Brackets 5 YEAR WARRANTY

    Tags: , , , , , , , ,

  • cobra Comments Off
    Cobra-Citroen-DS3-1-6-Racing-2-5-Resonated-Cat-Back-Exhaust-CT16TP102-CF-01-di Cobra Citroen DS3 1.6 Racing 2.5 Resonated Cat Back Exhaust CT16TP102-CF
    Cobra Citroen DS3 1.6 Racing 2.5 Resonated Cat Back Exhaust CT16TP102-CF

    Cobra Citroen DS3 1.6 Racing 2.5 Resonated Cat Back Exhaust CT16TP102-CF
    Performance Exhausts Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. UK Manufactured All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. The heritage in the UK’s performance exhaust market spans over five decades with a proven track record of a commitment to continuous improvement and investment in new exhaust technology. This commitment has resulted in the company being awarded the “Made In Sheffield” mark which is a symbol of excellence in manufacturing which is recognised worldwide. Cobra Sport’s range of performance exhausts demonstrate the highest quality of manufacturing, each system is hand-made in Sheffield and in-house expertise ensures that all Cobra Sport Exhausts are engineered the highest tolerances ensuring a perfect first-time fit, great performance and a truly pitch perfect exhaust sound. Cobra Sport’s Exhaust production facilities are geared up to producing performance exhausts in high volume, not only for themselves but also for clients such as Subaru UK, Isuzu UK and Ginetta Cars, to name a few. This does not preclude working for clients on an individual’one-off’ basis for proto-type or custom developments whether that be for road, track or race exhausts. Precision power, matched by sensational looks and an inspirational sound is the Cobra Sport promise. Quality Manufacturing Cobra Sport brings four decades of innovative design and unparalleled manufacturing expertise to their range of performance exhausts that match the aspirations of the most demanding driver. Engineered to the highest tolerances with Mandrel tube bending to ensure a smooth unrestricted airflow, advanced manufacturing techniques and superior TIG welding procedures produce a superlative finish, while total precision and extensive testing ensures a perfect first-time fit and a truly pitch-perfect sound. TIG Not MIG All Cobra Sport Exhausts feature tungsten inert gas (TIG) welding rather than metal inert gas (MIG) which is used employed by many competitors in the aftermarket performance exhaust market. Cobra Sport Exhausts are hand crafted by highly trained exhaust technicians in Sheffield, utilising superior TIG welding techniques to create a product of the highest standard. When compared with MIG, TIG welding is a technically superior, intricate and highly precise process requiring a much higher level of operator skill, co-ordination and experience. TIG welding requires the components to be spotlessly clean prepared surfaces and cut to within smaller tolerances enabling an aesthetic weld with no splatter. TIG welding produces a stronger more durable weld that is generally more malleable and less brittle due to the slower cooling rate of the metals. The TIG welding process heats the stainless steel enough to bond with minimal filler needed. This process allows total control over the weld producing a perfect bead with a flatter, intricate and visually striking finish in keeping with the hand crafted quality associated with Cobra Sport Exhausts. MIG welding is more commonly used for lengthier welds where speed is key but lacks precise control of the finish weld leading to splatter, rough edges and overspill. The precision of TIG welding makes it the best option for detailed performance exhaust manufacture where precision, strength, longevity and visual appeal is key. We are dedicated to ensuring the highest possible quality service to our customers. One of our sales team will be on hand to help you as soon as possible. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gnj_automotive” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Warranty Period: Lifetime (Original Purchaser)
    • Material: T304 Stainless Steel
    • Manufacturer Part Number: CT16TP102-CF/2
    • Classic Car Part: No
    • Brand: Cobra Sport

    Cobra Citroen DS3 1.6 Racing 2.5 Resonated Cat Back Exhaust CT16TP102-CF

    Tags: , , , , , ,

  • first Comments Off
    2023-C43-First-Drive-With-Mr-Amg-Less-Or-More-Amg-Than-Before-01-kkh

    Tags: , , ,

  • product Comments Off
    Product-Feature-Mbrp-Race-Profile-Cat-Back-01-nc

    Tags: , , , , ,

  • driven Comments Off
    Driven-The-New-C43-4matic-Is-More-Amg-Than-Ever-Before-01-lzgp

    Tags: , , ,

  • milltek Comments Off
    Milltek-Non-Resonated-Louder-Race-Cat-Back-Stainless-Exhaust-System-SSXFD144-01-elic Milltek Non Resonated (Louder) Race Cat Back Stainless Exhaust System SSXFD144

    Milltek Non Resonated (Louder) Race Cat Back Stainless Exhaust System SSXFD144
    Milltek Non Resonated (Louder) Race Cat Back Stainless Exhaust System – SSXFD144. Milltek 2.75 Cat Back Exhaust System Non-Resonated. Race Titanium Twin 80mm GT80. MSFD194REP: Front Silencer Bypass Pipe. MSFD197: Rear Silencer Assembly (Race). MSTIP192: 2 x Titanium Trim Assembly. Pipe ø: 2.75 (69.85mm). Tip style: Twin 80mm GT80. Milltek have 30 years of continuous ongoing experience of exhaust development. They use only the highest grade T304 Stainless Steel in their exhausts. This is a very hard wearing alloy with a high chromium content offering superb corrosion resistance. It is also evident in the design of Milltek’s exhaust systems. Unlike systems merely designed to be loud Milltek optimise their systems for minimum back pressure and maximum flow-rate. The more exhaust gas you get out of your engine the more air you can get in which in turn leads to power gains as the engine breathes more freely. You will also enjoy performance gains from the reduced weight of these systems against the stock systems. Milltek understand that the grown up motoring enthusiast might not want to wake up the neighbours or listen to a droning exhaust note on long motorway journeys so they offer a choice of resonated and non-resonated systems. Resonated systems come with a special resonator chamber designed to cancel out certain frequencies. Non-resonated systems are a little louder but offer the best power gains and are still engineered not to be excessively loud. As these systems run from primary catalyst back they may replace secondary catalytic converters where present. The vehicle SHOULD still be able to pass MOT emissions testing (but is not guaranteed), without the secondary cats which are generally only present for extra emissions control on cold-start. Picture Is For Illustration Purposes Only. 19.05.2022, 16:37:19. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone, fax and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. OVERSEAS DELIVERIES: We can send items anywhere in the world! We work hard to bring you the most competitive pricing available and we won’t stop there. If you have seen the same product elsewhere for less, let us know and we’ll endeavour to match the price. Printed evidence of offer may be required; our staff will verify the offer. The competitor’s price must be available to all customers and exclude any personal discounts. We will only price match on like for like purchasing routes i. This price promise cannot be used in conjunction with any offer or discount. This price promise is undertaken in good faith and within the bounds of the law; it can be withdrawn at any time without notice. Final decision on the validity of a price promise request will rest with Demon Tweeks. For the sizing guide. Oil, Fluid & Liquid Shop. Demon Tweeks, 75 Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG, United Kingdom. GB 840 2501 70. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “demontweeksdirect” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Manufacturer: Milltek
    • Brand: Milltek
    • MPN: MSFD194REP / MSTIP192 / MSFD195 / MSFD197
    • Manufacturer Part Number: SSXFD144

    Milltek Non Resonated (Louder) Race Cat Back Stainless Exhaust System SSXFD144

    Tags: , , , , , , , ,

  • back Comments Off
    Ram-1500-3-Cat-Back-Dual-Rear-Exit-Exhaust-Overview-01-rbwy

    Tags: , , , , ,

  • cobra Comments Off
    Cobra-Citroen-DS3-1-6-Racing-2-5-Non-Resonated-Cat-Back-Exhaust-CT15TP102-CF-01-cxg Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15TP102-CF
    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15TP102-CF

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15TP102-CF
    Performance Exhausts Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. UK Manufactured All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. The heritage in the UK’s performance exhaust market spans over five decades with a proven track record of a commitment to continuous improvement and investment in new exhaust technology. This commitment has resulted in the company being awarded the “Made In Sheffield” mark which is a symbol of excellence in manufacturing which is recognised worldwide. Cobra Sport’s range of performance exhausts demonstrate the highest quality of manufacturing, each system is hand-made in Sheffield and in-house expertise ensures that all Cobra Sport Exhausts are engineered the highest tolerances ensuring a perfect first-time fit, great performance and a truly pitch perfect exhaust sound. Cobra Sport’s Exhaust production facilities are geared up to producing performance exhausts in high volume, not only for themselves but also for clients such as Subaru UK, Isuzu UK and Ginetta Cars, to name a few. This does not preclude working for clients on an individual’one-off’ basis for proto-type or custom developments whether that be for road, track or race exhausts. Precision power, matched by sensational looks and an inspirational sound is the Cobra Sport promise. Quality Manufacturing Cobra Sport brings four decades of innovative design and unparalleled manufacturing expertise to their range of performance exhausts that match the aspirations of the most demanding driver. Engineered to the highest tolerances with Mandrel tube bending to ensure a smooth unrestricted airflow, advanced manufacturing techniques and superior TIG welding procedures produce a superlative finish, while total precision and extensive testing ensures a perfect first-time fit and a truly pitch-perfect sound. TIG Not MIG All Cobra Sport Exhausts feature tungsten inert gas (TIG) welding rather than metal inert gas (MIG) which is used employed by many competitors in the aftermarket performance exhaust market. Cobra Sport Exhausts are hand crafted by highly trained exhaust technicians in Sheffield, utilising superior TIG welding techniques to create a product of the highest standard. When compared with MIG, TIG welding is a technically superior, intricate and highly precise process requiring a much higher level of operator skill, co-ordination and experience. TIG welding requires the components to be spotlessly clean prepared surfaces and cut to within smaller tolerances enabling an aesthetic weld with no splatter. TIG welding produces a stronger more durable weld that is generally more malleable and less brittle due to the slower cooling rate of the metals. The TIG welding process heats the stainless steel enough to bond with minimal filler needed. This process allows total control over the weld producing a perfect bead with a flatter, intricate and visually striking finish in keeping with the hand crafted quality associated with Cobra Sport Exhausts. MIG welding is more commonly used for lengthier welds where speed is key but lacks precise control of the finish weld leading to splatter, rough edges and overspill. The precision of TIG welding makes it the best option for detailed performance exhaust manufacture where precision, strength, longevity and visual appeal is key. We are dedicated to ensuring the highest possible quality service to our customers. One of our sales team will be on hand to help you as soon as possible. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gnj_automotive” and is located in this country: GB. This item can be shipped worldwide.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Warranty Period: Lifetime (Original Purchaser)
    • Material: T304 Stainless Steel
    • Manufacturer Part Number: CT15TP102-CF/2
    • Classic Car Part: No
    • Brand: Cobra Sport

    Cobra Citroen DS3 1.6 Racing 2.5 Non-Resonated Cat Back Exhaust CT15TP102-CF

    Tags: , , , , , ,

« Previous Entries