WP_Cloudy

Section

Archive

  • series Comments Off
    BMW-2-Series-M240i-Milltek-Resonated-Race-GPF-Back-Exhaust-Polished-GT90-Trims-01-fdr BMW 2 Series M240i Milltek Resonated Race GPF Back Exhaust Polished GT90 Trims
    BMW 2 Series M240i Milltek Resonated Race GPF Back Exhaust Polished GT90 Trims
    BMW 2 Series M240i Milltek Resonated Race GPF Back Exhaust Polished GT90 Trims

    BMW 2 Series M240i Milltek Resonated Race GPF Back Exhaust Polished GT90 Trims
    BMW 2 Series M240i Milltek Sport Performance Resonated Race GPF Back Exhaust Polished GT 90 Trims EC Approved. Genuine Brand New Milltek Sport Resonated Race GPF Back Exhaust System. Milltek Sport Resonated Race GPF Back Exhaust System. Polished GT 90 Trims. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – This is a non resonated system, louder than resonated. If you want the quieter resonated system please see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in System SSXBM1101. MSBM306: Resonated Centre Section. MSBM246: Rear Silencer Assembly (Valved). MSBM247: Outlet Pipe (with Electronic Valve Base)(Requires the electric valve motor from the OEM BMW system). MSBM279: LH Mounting Bracket. MSBM280: RH Mounting Bracket. MSAU529 x2: Polished Tip Assembly. Pipe Diameter: 2.62? (66.50mm) Tip Style: Twin 90mm GT90. Fits: BMW 2 Series M240i (F22 LCI – OPF equipped Models only) 2019 and later. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Performance and Genuine OEM Parts. You can see Part Werx legacy feedback via the old part werx profile. Made with in Great Britain. Template Managed & Developed by Dev VIP. 30-06-2019 16:06:19. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
    • Manufacturer Part Number: SSXBM1101
    • Country/Region of Manufacture: United Kingdom
    • Brand: Milltek Sport

    BMW 2 Series M240i Milltek Resonated Race GPF Back Exhaust Polished GT90 Trims

    Tags: , , , , , , , , ,

  • milltek Comments Off
    Milltek-3-00-Non-Resonated-Louder-Race-Cat-Back-Non-Valved-Exhaust-01-umm Milltek 3.00 Non Resonated (Louder) Race Cat-Back Non-Valved Exhaust

    Milltek 3.00 Non Resonated (Louder) Race Cat-Back Non-Valved Exhaust
    4 Wheels – Motorsport. 4 Wheels – Road Tuning. 2 Wheels – Motorcycle. Milltek 3.00 Non Resonated (Louder) Race Cat-Back Non-Valved Exhaust – SSXAU522. Milltek have 30 years of continuous ongoing experience of exhaust development. They use only the highest grade T304 Stainless Steel in their exhausts. This is a very hard wearing alloy with a high chromium content offering superb corrosion resistance. It is also evident in the design of Milltek’s exhaust systems. Unlike systems merely designed to be loud Milltek optimise their systems for minimum back pressure and maximum flow-rate. The more exhaust gas you get out of your engine the more air you can get in which in turn leads to power gains as the engine breathes more freely. You will also enjoy performance gains from the reduced weight of these systems against the stock systems. Milltek understand that the grown up motoring enthusiast might not want to wake up the neighbours or listen to a droning exhaust note on long motorway journeys so they offer a choice of resonated and non-resonated systems. Resonated systems come with a special resonator chamber designed to cancel out certain frequencies. Non-resonated systems are a little louder but offer the best power gains and are still engineered not to be excessively loud. Milltek Stainless Steel 3.00 Non Resonated (Louder) Cat Back System. Quad Round Cerakote Black Tips. MSAU618REP: 1 x Milltek Centre Silencer Delete Pipe MSAU653: 1 x Milltek Rear Silencer (non-valved) MSVW372: 4 x Milltek GT100 100mm Gloss Black Tail Pipes. Picture Is For Illustration Purposes Only. As these systems run from primary catalyst back they may replace secondary catalytic converters where present. The vehicle SHOULD still be able to pass MOT emissions testing (but is not guaranteed), without the secondary cats which are generally only present for extra emissions control on cold-start. 21.04.2022, 10:57:29. JJC Five Star Service. Any subsequent orders can be delivered to an alternative address. ORDER NOTES – Due to the automated system we operate, we cannot guarantee to be able to view any notes or comments you add to your order. OVERSEAS ORDERS – Please be aware that we are unable to alter the value or description marked on orders destined overseas for the purposes of avoiding having to pay duty on your order. LISTING IMAGES – In most cases, the images used on our listings are generic and for illustration purposes only. Please ensure you read the listing title and description for an accurate summary of what is included in the listing. We are putting the’customer’ back into’Customer Service’. Our shop is designed to be fast, clear and easy to use. However, we want you to be confident that if you have any questions or queries regarding any of our listings, our dedicated team of experts are at the other end of a telephone or keyboard waiting to help. Anywhere in the world! Express and guaranteed services will need to be selected and paid for at time of ordering. At JJC, we strive to keep feedback 100% positive. We do this by offering quality products and 1st class customer service. Our customers satisfaction is the most important thing to us at JJC. BOX 2333, Kencourt T/A JJC Race and Rally, Wrexham, LL11 0HB. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “jjcraceandrally” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Manufacturer: Milltek
    • Brand: Milltek
    • MPN: MSAU618REP / MSAU653 / msvw372
    • Manufacturer Part Number: SSXAU522

    Milltek 3.00 Non Resonated (Louder) Race Cat-Back Non-Valved Exhaust

    Tags: , , , , , ,

  • milltek Comments Off
    Milltek-Mercedes-A-Class-A35-Cat-Back-Exhaust-Race-System-Valved-SSXMZ131-01-scwu Milltek Mercedes A Class A35 Cat Back Exhaust Race System Valved SSXMZ131

    Milltek Mercedes A Class A35 Cat Back Exhaust Race System Valved SSXMZ131
    Price Shown is at least 10% off the RRP. Mercedes A-Class A35 AMG 2.0 Turbo (W177 Hatch Only OPF/GPF Models) 2019 and Later. Cat Back Race System – Deletes GPF/OPF – Valved – Connects to OE Tailpipes – Required Stage 2 ECU Remap. MSMZ104REP: GPF/OPF Bypass Pipe (Non-Resonated). MSMZ106: Adaptor to Milltek Sport Front Res Back or GPF/OPF Back Systems. MSMZ109REP: Rear Silencer Replacement Section. MSMZ110: LH Tailpipe Connecting Pipe. MSMZ111: RH Tailpipe Connecting Pipe (Valved). Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, United States, Australia, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Egypt, Guadeloupe, French Guiana, Jordan, Cambodia, Sri Lanka, Macau, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Bahamas, Colombia, Jamaica, Kuwait, Panama, Philippines, Qatar, Uruguay, Vietnam.
    • Material: T304 Stainless Steel
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXMZ131
    • Manufacturer Part Number: SSXMZ131
    • Other Part Number: SSXMZ131
    • Brand: Milltek

    Milltek Mercedes A Class A35 Cat Back Exhaust Race System Valved SSXMZ131

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-VW-Golf-Mk7-5-GTi-Cat-Back-Race-Exhaust-Non-Resonated-Titanium-Trims-01-udfi Milltek VW Golf Mk7.5 GTi Cat Back Race Exhaust Non Resonated Titanium Trims

    Milltek VW Golf Mk7.5 GTi Cat Back Race Exhaust Non Resonated Titanium Trims
    Price Shown is at least 10% off the RRP. Volkswagen Golf MK7.5 GTi (Non Performance Pack Models & Non-GPF Equipped Models Only) 2017 to 2018. Volkswagen Golf MK7.5 GTi (Performance Pack Models & Non OPF/GPF Equipped Models Only) 2017 to 2018. Cat Back Race Non-Resonated GT-100 Titanium Trims. MSVW402REP: Front Silencer Bypass Pipe. MSVW403: Centre Silencer Assembly. MSVW474: Rear Silencer Bypass. MSTIP123 x2: Titanium GT100 Tip Assembly. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXVW464_1
    • Manufacturer Part Number: SSXVW464
    • Other Part Number: SSXVW464_1
    • Brand: Milltek
    • Material: T304 Stainless Steel

    Milltek VW Golf Mk7.5 GTi Cat Back Race Exhaust Non Resonated Titanium Trims

    Tags: , , , , , , , ,

  • scorpion Comments Off
    Scorpion-Exhaust-Downpipe-Audi-RS3-8v-Facelift-17-18-Inc-RACE-Pipe-SAUC079-01-fr Scorpion Exhaust Downpipe Audi RS3 8v Facelift 17-18 Inc RACE Pipe SAUC079
    Scorpion Exhaust Downpipe Audi RS3 8v Facelift 17-18 Inc RACE Pipe SAUC079
    Scorpion Exhaust Downpipe Audi RS3 8v Facelift 17-18 Inc RACE Pipe SAUC079
    Scorpion Exhaust Downpipe Audi RS3 8v Facelift 17-18 Inc RACE Pipe SAUC079
    Scorpion Exhaust Downpipe Audi RS3 8v Facelift 17-18 Inc RACE Pipe SAUC079
    Scorpion Exhaust Downpipe Audi RS3 8v Facelift 17-18 Inc RACE Pipe SAUC079

    Scorpion Exhaust Downpipe Audi RS3 8v Facelift 17-18 Inc RACE Pipe SAUC079
    BRAND NEW SCORPION HIGH FLOW DOWNPIPE & RACE PIPE TO FIT RS3 8V FACELIFT 2017 – 2018. Specialising in Performance Exhaust Systems. A Brand New Scorpion Stainless Steel High Flow Downpipe & RACE Pipe. Not For Road Use. Stage 2 ECU Remap Required. FITS TO: OE & Scorpion Exhaust. (Inc Appropriate Fitting Kit is Supplied). Audi RS3 8v Facelift. The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. UK MAINLAND & MOST AREAS OF SCOTLAND. Extra Charge To These Postcodes. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW4, KW5-KW17, PA20-PA38, PA40-PA49. PA60-PA78, PA87 – PA88, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. There is an Additional Courier Charge. To Send Items To These Areas Listed Below. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Grade: Stainless Steel
    • FITS TO: OEM & Scorpion Cat Back System
    • Manufacturer Part Number: SAUC079
    • FITS MODELS 1: Audi RS3 8v Facelift 207 – 2018 Non GPF Model
    • Scorpion Pipe Diameter OD: 100mm / 4\
    • YEARS: 2017 – 2018 Facelift
    • IMPORTANT NOTE 4: Facelift – Non GPF Models Only
    • FITTING KIT: Yes – An Appropriate Fitting Kit Supplied
    • Scorpion Authorised UK Re Seller: YES
    • EC APPROVED: NO
    • Brand: Scorpion

    Scorpion Exhaust Downpipe Audi RS3 8v Facelift 17-18 Inc RACE Pipe SAUC079

    Tags: , , , , , , , ,

  • toyota Comments Off
    Toyota-S-Insane-New-Engine-Shocks-The-Entire-Car-Industry-01-ynv

    Tags: , , , , ,

  • golf Comments Off
    VW-Golf-MK7-5-R-2-0-TSI-Milltek-Non-Valved-Race-Res-Cat-Back-Exhaust-Polished-01-jt VW Golf MK7.5 R 2.0 TSI Milltek Non Valved Race Res Cat Back Exhaust Polished

    VW Golf MK7.5 R 2.0 TSI Milltek Non Valved Race Res Cat Back Exhaust Polished
    VW Golf MK7.5 R 2.0 TSI Milltek Sport Non Valved Race Resonated Cat Back Exhaust Polished Oval Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System. Milltek Sport Non Valved Resonated Cat Back Exhaust. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Quieter – this is a resonated system, quieter than non resonated, if you want the louder non resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXVW451 Cat Back System. MSVW467: Rear Silencer (non-valved). MSTIP159 x4: Polished Oval Tips. Pipe Ø: 3.00? Fits: Volkswagen Golf Mk7.5 R 2.0 TSI 310PS (Non-GPF Equipped Models Only) 2017 and Later. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine OEM & Performance Parts. Helping you to stay mobile. Most questions can be answered by reading the listing description below, but if you have any questions please message. Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
    • Brand: Milltek Sport
    • Manufacturer Part Number: SSXVW451

    VW Golf MK7.5 R 2.0 TSI Milltek Non Valved Race Res Cat Back Exhaust Polished

    Tags: , , , , , , ,

  • milltek Comments Off
    Milltek-VW-Golf-MK7-5-GTi-Cat-Back-Race-Non-Resonated-Exhaust-2019-On-Burnt-Trim-01-fgwe Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2019 On Burnt Trim

    Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2019 On Burnt Trim
    Price Shown is at least 10% off the RRP. Volkswagen Golf MK7.5 GTi (TCR & Performance Pack Models – GPF/OPF Equipped Models Only) 2019 Onwards. Cat Back Race Non-Resonated GT-100 Burnt Titanium Trims. MSVW402REP: Front Silencer Bypass Pipe. MSVW403: Centre Silencer Assembly. MSVW474: Rear Silencer Bypass. MSVW476 x2: Trim Extension Pipes. MSTIP194 x2: Burnt Titanium GT-100 Trims. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Material: T304 Stainless Steel
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXVW467
    • Manufacturer Part Number: SSXVW467
    • Other Part Number: SSXVW467
    • Brand: Milltek

    Milltek VW Golf MK7.5 GTi Cat Back Race Non-Resonated Exhaust 2019 On Burnt Trim

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-BMW-M140i-3-5-Door-GPF-Back-Exhaust-RACE-NonRes-Burnt-Ti-19-on-SSXBM1109-01-msh Milltek BMW M140i 3&5 Door GPF Back Exhaust RACE NonRes Burnt Ti 19 on SSXBM1109

    Milltek BMW M140i 3&5 Door GPF Back Exhaust RACE NonRes Burnt Ti 19 on SSXBM1109
    BRAND NEW MILLTEK STAINLESS STEEL GPF BACK SYSTEM 2019 ON. Specialising in Performance Exhaust Systems. Milltek Sport Authorised Dealer. A Milltek Stainless Steel GPF Back Exhaust. Non Resonated – Louder. (Includes An Appropriate Fitting Kit). GPF Models Only 2019 on. BMW 1 Series M140i 3 & 5 Door (F20 & F21 LCI). Non Resonated Centre Section. Rear Silencer Assembly (Valved). 90mm Burnt Titanium Trims GT-90. Pipe Diameter Size O. 2.62-inch (66.50mm). The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. Life Time Guarantee For The First Purchaser. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek are the exhaust specialists! Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge – noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW4-KW3, KW5-KW17, PA20-PA38, PA40-PA49. PA60-PA78, PA87 – PA88 PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Model/ Series: BMW M140i 3 & 5 Door (F20 & F21 LCI OPF) 2019 on
    • Subtype: Milltek Stainless Steel GPF Back System
    • PIPE DIAMETER SIZE OD: 2.62-inch (66.50mm)
    • Manufacturer Part Number: SSXBM1109
    • TAILPIPE: Burnt Titanium GT-90 Trims – 2 x 90mm GT90
    • FITTING KIT: Yes – Includes An Appropriate Fitting Kit
    • MILLTEK AUTHORISED DEALER: YES
    • SYSTEM TYPE: RACE SYSTEM- Non Resonated Louder
    • EC APPROVED: No
    • Reference OE/OEM Number: SSXBM1109
    • Type: Exhaust
    • IMPORTANT NOTE: GPF MODELS ONLY – 2019 on
    • Part Manufacturer: Milltek
    • IMPORTANT NOTE 2: 2WD Models Only
    • Part Manufacturer Number: SSXBM1109
    • Brand: Milltek
    • Intended Use: Modification/ Enhancement

    Milltek BMW M140i 3&5 Door GPF Back Exhaust RACE NonRes Burnt Ti 19 on SSXBM1109

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-Ford-Focus-Mk4-ST-GPF-OPF-Back-Race-Exhaust-Black-Trims-SSXFD325-01-pmm Milltek Ford Focus Mk4 ST GPF OPF Back Race Exhaust Black Trims SSXFD325

    Milltek Ford Focus Mk4 ST GPF OPF Back Race Exhaust Black Trims SSXFD325
    Price Shown is at least 10% off the RRP. Ford Focus Mk4 ST 2.3-litre EcoBoost Estate/Wagon/Combi (OPF/GPF Equipped Cars Only) 2019 and Later. GPF/OPF Back – Race. GPF/OPF Back – Race (Louder) with Cerakote Black GT-115 Trims. F5124: Adapter to OE GPF/OPF. MSFD262REP: Rear Silencer Bypass. MSFD263 x2: Outlet Pipes. MSFD269 x2: Trim Extension Pipes. MSTIP156 x2: Ceramic Black Tips. Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, Japan, Australia, United States, Bahrain, Canada, Brazil, New Zealand, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Guadeloupe, French Guiana, Jordan, Sri Lanka, Macau, Maldives, Martinique, Nicaragua, Peru, Paraguay, Saudi Arabia, United Arab Emirates, Bahamas, Colombia, Jamaica, Kuwait, Panama, Philippines, Uruguay, Vietnam.
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXFD325
    • Manufacturer Part Number: SSXFD325
    • Other Part Number: SSXFD325
    • Brand: Milltek
    • Material: T304 Stainless Steel

    Milltek Ford Focus Mk4 ST GPF OPF Back Race Exhaust Black Trims SSXFD325

    Tags: , , , , , , , ,

« Previous Entries