WP_Cloudy

Section

Archive

March 2022
M T W T F S S
« Feb   Apr »
 123456
78910111213
14151617181920
21222324252627
28293031  

Recent Search

  • milltek Comments Off
    Milltek-BMW-F82-M4-Coupe-Cat-Back-Exhaust-Race-System-Titanium-Tips-01-ppk Milltek BMW F82 M4 Coupe Cat Back Exhaust Race System Titanium Tips

    Milltek BMW F82 M4 Coupe Cat Back Exhaust Race System Titanium Tips
    Price Shown is at least 10% off the RRP. BMW 4 Series F82 M4 Coupé 2014 and later. Titanium Tips – OE System requires cutting. F5111 x2: Adapter Pipes. MSBM257: Centre Silencer (Race). MSBM269: Rear Silencer Connecting Pipe Left Hand. MSBM270: Rear Silencer Connecting Pipe Right Hand. MSTIP193 x4: Titanium Tip Assembly. Bore Size (pipe diameter). 2.76 (70.00mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.
    • Brand: Milltek
    • Country/Region of Manufacture: United Kingdom
    • Material: T304 Stainless Steel
    • Manufacturer Part Number: SSXBM997_2
    • Interchange Part Number: SSXBM997
    • Other Part Number: SSXBM997

    Milltek BMW F82 M4 Coupe Cat Back Exhaust Race System Titanium Tips

    Tags: , , , , , , ,

  • milltek Comments Off
    Milltek-BMW-M2-F87-GPF-OPF-Back-Race-Exhaust-Polished-Trims-SSXBM1086-01-obg Milltek BMW M2 F87 GPF OPF Back Race Exhaust Polished Trims SSXBM1086

    Milltek BMW M2 F87 GPF OPF Back Race Exhaust Polished Trims SSXBM1086
    Price Shown is at least 10% off the RRP. BMW 2 Series F87 M2 Competition Coupé 2018 and Later. GPF/OPF Back System with Quad GT-90 Polished Trims – Race (Louder). MSBM299: Centre Silencer – Race. MSBM302: LH Valve Outlet Pipe. MSBM303: RH Valve Outlet Pipe. MSAU529 x4: Polished Tip Assembly. Bore Size (pipe diameter). 2.76 (70.00mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXBM1086
    • Manufacturer Part Number: SSXBM1086
    • Other Part Number: SSXBM1086
    • Brand: Milltek
    • Material: T304 Stainless Steel

    Milltek BMW M2 F87 GPF OPF Back Race Exhaust Polished Trims SSXBM1086

    Tags: , , , , , ,

  • milltek Comments Off
    Milltek-Toyota-Supra-A90-Coupe-3-0-Turbo-GPF-OPF-Race-Back-Exhaust-SSXTY112-01-zpo Milltek Toyota Supra A90 Coupe 3.0 Turbo GPF OPF Race Back Exhaust SSXTY112

    Milltek Toyota Supra A90 Coupe 3.0 Turbo GPF OPF Race Back Exhaust SSXTY112
    Price Shown is at least 10% off the RRP. Toyota Supra A90 Coupe 3.0 Turbo (UK/European with OPF/GPF) 2019 and Later. Toyota Supra A90 Coupe 3.0 Turbo (USA/ROW without OPF/GPF) 2019 and Later. GPF/OPF Back with GT-115 Titanium Trims – Race (Louder) Valved. MSTY102: LH Axle Pipe. MSTY103: RH Axle Pipe. MSTY107: Rear Silencer – Race. MSTY105: Silencer Outlet Pipe (Non-Valved). MSTY106: Silencer Outlet Pipe (Valved). MSTIP252 x2: 4.5 Tailpipe Trim Titanium. Bore Size (pipe diameter). 2.76 (70.00mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand.
    • Country/Region of Manufacture: United Kingdom
    • Interchange Part Number: SSXTY112
    • Manufacturer Part Number: SSXTY112
    • Other Part Number: SSXTY112
    • Brand: Milltek
    • Material: T304 Stainless Steel

    Milltek Toyota Supra A90 Coupe 3.0 Turbo GPF OPF Race Back Exhaust SSXTY112

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-BMW-M2-Competition-Exhaust-RACE-System-GPF-Back-Burnt-Titanium-SSXBM1089-01-pjdx Milltek BMW M2 Competition Exhaust RACE System GPF Back Burnt Titanium SSXBM1089
    Milltek BMW M2 Competition Exhaust RACE System GPF Back Burnt Titanium SSXBM1089
    Milltek BMW M2 Competition Exhaust RACE System GPF Back Burnt Titanium SSXBM1089
    Milltek BMW M2 Competition Exhaust RACE System GPF Back Burnt Titanium SSXBM1089
    Milltek BMW M2 Competition Exhaust RACE System GPF Back Burnt Titanium SSXBM1089

    Milltek BMW M2 Competition Exhaust RACE System GPF Back Burnt Titanium SSXBM1089
    BRAND NEW MILLTEK STAINLESS STEEL GPF BACK RACE SYSTEM TO FIT BMW M2 COMPETITION 2018 ON. Specialising in Performance Exhaust Systems. Milltek Sport Authorised Dealer. A Milltek Stainless Steel GPF Back Exhaust. (Includes An Appropriate Fitting Kit). RACE Exhaust – LOUDER. OE Exhaust Will Require Cutting For Installation. BMW 2 Series M2 Competition Coupe (F87). LH Valve Outlet Pipe. RH Valve Outlet Pipe. Burnt Titanium Trims 90mm GT90. Burnt Titanium GT90 Trims. Pipe Diameter Size O. 2.76-inch (70.00mm). The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. Life Time Guarantee For The First Purchaser. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek are the exhaust specialists! Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge – noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW4-KW3, KW5-KW17, PA20-PA38, PA40-PA49. PA60-PA78, PA87 – PA88 PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.
    • Subtype: Milltek Exhaust Stainless Steel GPF Back System
    • PIPE DIAMETER SIZE OD: 2.76-inch (70.00mm)
    • TAILPIPE: 4 x 90mm – Burnt Titanium GT90 Trims
    • FITTING KIT: Yes – Includes An Appropriate Fitting Kit
    • MILLTEK AUTHORISED DEALER: YES
    • Country/Region of Manufacture: United Kingdom
    • SYSTEM TYPE: RACE SYSTEM – Louder
    • EC APPROVED: NO
    • Type: Exhaust System
    • IMPORTANT NOTE: OE Exhaust Will Require Cutting For Installation
    • Part Manufacturer: Milltek
    • Part Manufacturer Number: SSXBM1089
    • Intended Use: Modification/ Enhancement
    • Manufacturer Part Number: SSXBM1089
    • Reference OE/OEM Number: Exhaust, RACE, SSXBM1089
    • Brand: Milltek
    • Model/ Series: BMW 2 Series M2 Competition Coupé (F87) 2018 on

    Milltek BMW M2 Competition Exhaust RACE System GPF Back Burnt Titanium SSXBM1089

    Tags: , , , , , , , ,

  • xdrive Comments Off
    Bmw-M3-Xdrive-The-World-S-Most-Complete-Super-Saloon-01-ji

    Tags: , , , , ,

  • cobra Comments Off
    Cobra-Aprilia-Tuono-V4-1100-RR-Exhaust-2nd-Race-Pipe-and-Cat-Back-MCAP01S001-CF-01-ix Cobra Aprilia Tuono V4 1100 RR Exhaust 2nd Race Pipe and Cat Back MCAP01S001 CF
    Cobra Aprilia Tuono V4 1100 RR Exhaust 2nd Race Pipe and Cat Back MCAP01S001 CF

    Cobra Aprilia Tuono V4 1100 RR Exhaust 2nd Race Pipe and Cat Back MCAP01S001 CF
    Price Shown is at least 10% off the RRP. MODEL – Tuono V4 1100 RR. YEAR – 2015 to 2016. PART DESCRIPTION – 2nd Race Pipe & Cat Back Exhaust. PART NUMBER – MCAP01S001-CF. OEM STATIC SOUND LEVEL (TRACK TEST WITH DB KILLER) – 93.3dB. COBRA STATIC SOUND LEVEL (TRACK TEST WITHOUT DB KILLER) – 102.8dB. EC APPROVED – No. EC MARKED – No. ROAD LEGAL – No. WEIGHT SAVING – 1.77kg. DB KILLER – No. FRAME ATTACHMENT – Bracket. LINK PIPE MATERIAL – Stainless Steel. FURTHER INFORMATION – The Cobra Sport Tri-Oval carbon fibre silencer with additional heat shield adds a more precise line to the rear of the Tuono for a more aggressive stance. By removing the unnecessary restriction of the secondary catalyst the Cobra Sport Tri-oval cat-back system allows for more power and responsiveness throughout the rev range, which when combined with Cobra’s signature soundtrack transforms the RR into the ultimate sport-tourer. Please note – Some systems will be made to order, please allow time for your system to be made. Found this system cheaper elsewhere? Mandrel bends for optimum flow. Remapping is recommended when purchasing / fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sport cats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. How are your exhausts made? All of our exhausts are made from aircraft grade 304 stainless steel and constructed using precision TIG welding with mandrel formed bends in the pipe work for a smoother gas flow. We pride ourselves in producing high quality products. What sound can I expect from your exhausts? Our exhausts will have a more sporty tone than original equipment exhausts. This is an inevitable result of the less restrictive systems we produce. However, with careful design and production methods, we aim to keep a subtle sporty tone. If you prefer a loud system, then one of our non-resonated (no centre box) exhaust systems will provide a louder exhaust note. Many of our products feature a movie of the exhaust and give some idea as to the sound which you can expect. What power gains can I expect to achieve? Of course this varies from engine to engine, our systems are designed and manufactured to maximize gas flow with increased diameter pipe work, free flowing silencers and mandrel bends which provide a much less restrictive exhaust system than original equipment exhausts, resulting in a much better engine response and increased BHP. Typically you can expect to achieve around a 10% increase from the installation of a cat-back system. Some individual products also show approximate power gains. Is it legal to put a de-cat pipe on my car? You can only de-cat your car if it was registered prior to 1992, otherwise it will fail the emissions check at your MOT station. Will my car need remapping? If you are fitting a cat back system to your car, this will have no effect on the engine management operations. However, if you are replacing your original system with a de-cat, sports cat or front pipe your car may need remapping as it may cause the vehicles engine management light to activate. What is the difference between resonated and non-resonated systems? Resonators are box chambers incorporated into the exhaust system, which are used to make the exhaust quieter, by cancelling certain sound frequencies. A non-resonated exhaust system will therefore, give a louder exhaust note and a resonated exhaust system, a quieter exhaust note. Either option will still provide extra performance. What is a Slash-Cut tailpipe? Slash-cut tailpipes are finished and cut off at a 15 degree angle, and suit certain types of vehicles depending upon the shape of the bumper and overall aesthetics of the vehicle. If you require any advice on which tailpipe would be most appropriate for your car, please give us a call. What will be the finish of my exhaust? All our exhausts come with highly polished mirror finish tailpipes and rear boxes. All other pipework and gaskets etc, will be a matt polished finish. How do I keep my exhaust looking like new? If you do not clean your exhaust/tailpipe, it will eventually become discoloured and be more difficult to bring back to its original finish. Regular cleaning with a non-abrasive metal polish such as Solvol Autosol® will ensure that your exhaust continues to look as new. As a company we are committed to continuous improvement and investing in new developments, with a keen focus on quality and service our loyal highly trained team are always happy to help. The production facilities at Cobra Sport exhausts enables us to produce exhausts in high volume and having worked with clients such as Subaru UK, Isuzu UK and Ginetta Cars to name but a few. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in this country: GB. This item can be shipped to all countries in Europe, Japan, Australia, United States, Bahrain, Canada, Brazil, New Zealand, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Guadeloupe, French Guiana, Jordan, Sri Lanka, Macau, Maldives, Martinique, Nicaragua, Peru, Paraguay, Saudi Arabia, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Trinidad and Tobago, Uruguay, Vietnam.
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Custom Bundle: No
    • Interchange Part Number: MCAP01S001 CF
    • Warranty Period: LIFETIME (CONDITIONS APPLY)
    • Unit Quantity: 1
    • Grade: T304 STAINLESS STEEL
    • Manufacturer Part Number: MCAP01S001 CF
    • Classic Car Part: No
    • Other Part Number: MCAP01S001 CF
    • Brand: Cobra Sport

    Cobra Aprilia Tuono V4 1100 RR Exhaust 2nd Race Pipe and Cat Back MCAP01S001 CF

    Tags: , , , , , , ,

  • milltek Comments Off
    Milltek-Non-Resonated-Race-Cat-Back-Stainless-Exhaust-System-SSXFD144-01-qus Milltek Non Resonated Race Cat Back Stainless Exhaust System SSXFD144

    Milltek Non Resonated Race Cat Back Stainless Exhaust System SSXFD144
    4 Wheels – Motorsport. 4 Wheels – Road Tuning. 2 Wheels – Motorcycle. Milltek Non Resonated Race Cat Back Stainless Exhaust System – SSXFD144. Milltek 2.75 Cat Back Exhaust System Non-Resonated. Race Titanium Twin 80mm GT80. MSFD194REP: Front Silencer Bypass Pipe. MSFD197: Rear Silencer Assembly (Race). MSTIP192: 2 x Titanium Trim Assembly. Pipe ø: 2.75 (69.85mm). Tip style: Twin 80mm GT80. Milltek have 30 years of continuous ongoing experience of exhaust development. They use only the highest grade T304 Stainless Steel in their exhausts. This is a very hard wearing alloy with a high chromium content offering superb corrosion resistance. It is also evident in the design of Milltek’s exhaust systems. Unlike systems merely designed to be loud Milltek optimise their systems for minimum back pressure and maximum flow-rate. The more exhaust gas you get out of your engine the more air you can get in which in turn leads to power gains as the engine breathes more freely. You will also enjoy performance gains from the reduced weight of these systems against the stock systems. Milltek understand that the grown up motoring enthusiast might not want to wake up the neighbours or listen to a droning exhaust note on long motorway journeys so they offer a choice of resonated and non-resonated systems. Resonated systems come with a special resonator chamber designed to cancel out certain frequencies. Non-resonated systems are a little louder but offer the best power gains and are still engineered not to be excessively loud. As these systems run from primary catalyst back they may replace secondary catalytic converters where present. The vehicle SHOULD still be able to pass MOT emissions testing (but is not guaranteed), without the secondary cats which are generally only present for extra emissions control on cold-start. Picture Is For Illustration Purposes Only. JJC Five Star Service. Any subsequent orders can be delivered to an alternative address. ORDER NOTES – Due to the automated system we operate, we cannot guarantee to be able to view any notes or comments you add to your order. OVERSEAS ORDERS – Please be aware that we are unable to alter the value or description marked on orders destined overseas for the purposes of avoiding having to pay duty on your order. LISTING IMAGES – In most cases, the images used on our listings are generic and for illustration purposes only. Please ensure you read the listing title and description for an accurate summary of what is included in the listing. We are putting the’customer’ back into’Customer Service’. Our shop is designed to be fast, clear and easy to use. However, we want you to be confident that if you have any questions or queries regarding any of our listings, our dedicated team of experts are at the other end of a telephone or keyboard waiting to help. Anywhere in the world! Express and guaranteed services will need to be selected and paid for at time of ordering. At JJC, we strive to keep feedback 100% positive. We do this by offering quality products and 1st class customer service. Our customers satisfaction is the most important thing to us at JJC. BOX 2333, Kencourt T/A JJC Race and Rally, Wrexham, LL11 0HB. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “jjcraceandrally” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Manufacturer: Milltek
    • Brand: Milltek
    • MPN: MSFD194REP / MSTIP192 / MSFD195 / MSFD197
    • Manufacturer Part Number: SSXFD144

    Milltek Non Resonated Race Cat Back Stainless Exhaust System SSXFD144

    Tags: , , , , , , ,

  • cobra Comments Off
    Cobra-Sport-Venom-Race-GPF-Back-Performance-Exhaust-for-Ford-Focus-ST-Estate-Mk4-01-cr Cobra Sport Venom Race GPF-Back Performance Exhaust for Ford Focus ST Estate Mk4

    Cobra Sport Venom Race GPF-Back Performance Exhaust for Ford Focus ST Estate Mk4
    Cobra Sport Venom Box Delete Race GPF-Back Performance Exhaust – Ford Focus ST Estate (Mk4) – Carbon Tips. These Ford Focus Mk4 ST Estate performance exhausts are made in 3/76.2mm pipework and fit from the Gasoline Particulate Filter section backwards (GPF-back) these exhausts replace the centre and rear sections. All relevant fittings and gaskets are supplied. This exhaust comes with Carbon Tips. This exhaust removes the standard rear box for the ultimate improvement in terms of exhaust tone and sound level whilst keeping the stock catalyst and GPF in place. This exhaust system has been designed to be easily upgradable to a cat-back or full turbo-back exhaust in the future by purchasing additional sections. GPF-Back (Box Delete) Test Results. Sound – Engine at Idle: 70.9dB (+11.9dB) – Static 4,000rpm test: 93.8dB (+13dB). The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “dvbaudio” and is located in this country: GB. This item can be shipped to United Kingdom, United States, Japan, Ireland, Germany, Greece, Italy, Spain.
    • Manufacturer Part Number: FD128TP105-CF
    • Brand: Cobra Sport

    Cobra Sport Venom Race GPF-Back Performance Exhaust for Ford Focus ST Estate Mk4

    Tags: , , , , , , , , ,

  • cobra Comments Off
    Cobra-Sport-Venom-Race-GPF-Back-Performance-Exhaust-for-Ford-Focus-ST-Estate-Mk4-01-rqyk Cobra Sport Venom Race GPF-Back Performance Exhaust for Ford Focus ST Estate Mk4

    Cobra Sport Venom Race GPF-Back Performance Exhaust for Ford Focus ST Estate Mk4
    Cobra Sport Venom Box Delete Race GPF-Back Performance Exhaust – Ford Focus ST Estate (Mk4). These Ford Focus Mk4 ST Estate performance exhausts are made in 3/76.2mm pipework and fit from the Gasoline Particulate Filter section backwards (GPF-back) these exhausts replace the centre and rear sections. All relevant fittings and gaskets are supplied. This exhaust has a choice of 3 tailpipe options. Lease advise when placing your order which tip style you require. This exhaust removes the standard rear box for the ultimate improvement in terms of exhaust tone and sound level whilst keeping the stock catalyst and GPF in place. This exhaust system has been designed to be easily upgradable to a cat-back or full turbo-back exhaust in the future by purchasing additional sections. GPF-Back (Box Delete) Test Results. Sound – Engine at Idle: 70.9dB (+11.9dB) – Static 4,000rpm test: 93.8dB (+13dB). The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “dvbaudio” and is located in this country: GB. This item can be shipped to United Kingdom, United States, Japan, Ireland, Germany, Greece, Italy, Spain.
    • Manufacturer Part Number: FD128
    • Brand: Cobra Sport

    Cobra Sport Venom Race GPF-Back Performance Exhaust for Ford Focus ST Estate Mk4

    Tags: , , , , , , , , ,

  • milltek Comments Off
    Milltek-Sports-3-00-Race-Version-Cat-Back-Exhaust-System-SSXBM990-01-lxr Milltek Sports 3.00 Race Version Cat Back Exhaust System SSXBM990

    Milltek Sports 3.00 Race Version Cat Back Exhaust System SSXBM990
    Milltek Sports 3.00 Race Version Cat Back Exhaust System – SSXBM990. Milltek Stainless Steel 3.00 (76.20mm) Race Version Cat Back System. MSBM219: Flexible Connecting Pipe MSBM220: Centre Connecting Pipe MSBM246: Rear Silencer Assembly (Race) MSBM221: Rear Silencer Connecting Pipe MSBM245: Outlet Pipe MSBM247: Outlet Pipe (with Electronic Valve Base) MSAU532 x2: Cerakote Black Tip Assembly. Milltek have 30 years of continuous ongoing experience of exhaust development. They use only the highest grade T304 Stainless Steel in their exhausts. This is a very hard wearing alloy with a high chromium content offering superb corrosion resistance. It is also evident in the design of Milltek’s exhaust systems. Unlike systems merely designed to be loud Milltek optimise their systems for minimum back pressure and maximum flow-rate. The more exhaust gas you get out of your engine the more air you can get in which in turn leads to power gains as the engine breathes more freely. You will also enjoy performance gains from the reduced weight of these systems against the stock systems. Milltek understand that the grown up motoring enthusiast might not want to wake up the neighbours or listen to a droning exhaust note on long motorway journeys so they offer a choice of resonated and non-resonated systems. Resonated systems come with a special resonator chamber designed to cancel out certain frequencies. Non-resonated systems are a little louder but offer the best power gains and are still engineered not to be excessively loud. As these systems run from primary catalyst back they may replace secondary catalytic converters where present. The vehicle SHOULD still be able to pass MOT emissions testing (but is not guaranteed), without the secondary cats which are generally only present for extra emissions control on cold-start. Picture Is For Illustration Purposes Only. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone, fax and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. OVERSEAS DELIVERIES: We can send items anywhere in the world! Pay with a credit/debit card or cash and collect in person from our HQ in Wrexham, North Wales (ask for details before coming in). Finance options also available subject to status (minimum spend required), call for details. We work hard to bring you the most competitive pricing available and we won’t stop there. If you have seen the same product elsewhere for less, let us know and we’ll endeavour to match the price. Printed evidence of offer may be required; our staff will verify the offer. The competitor’s price must be available to all customers and exclude any personal discounts. We will only price match on like for like purchasing routes i. This price promise cannot be used in conjunction with any offer or discount. This price promise is undertaken in good faith and within the bounds of the law; it can be withdrawn at any time without notice. Final decision on the validity of a price promise request will rest with Demon Tweeks. For the sizing guide. Oil, Fluid & Liquid Shop. Demon Tweeks, 75 Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG, United Kingdom. GB 840 2501 70. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “demontweeksdirect” and is located in this country: GB. This item can be shipped to United Kingdom.
    • Manufacturer: Milltek
    • Brand: Milltek
    • MPN: MSBM219
    • Manufacturer Part Number: SSXBM990
    • Other Part Number: MSBM220

    Milltek Sports 3.00 Race Version Cat Back Exhaust System SSXBM990

    Tags: , , , , , , ,

« Previous Entries