-
yamaha Comments Off
-
milltek Comments Off
Milltek 3.00in Cat Back Race Exhaust System Non-Res Fits Audi S3 8V 14-15. A Milltek Cat-Back Exhaust System replaces the rear half of your exhaust from the catalytic converter back. This gives you the best of both worlds, improved sound and looks, but no worries about legality. Replacing stock pipework with wider, better designed Milltek pipework releases more performance from your car’s engine. A new Milltek backbox and silencers will give your car a sporty, but refined sound. Sporty but refined sound. Lightweight and durable stainless steel. Outstanding fit and quality. A cat-back exhaust hooks up to your factory system behind the main cat, replacing the pipework, silencers, and back-boxes with new Milltek kit. Milltek’s pipework will be carefully computer designed to increase flow-rate with wider pipework and carefully designed mandrel bends. This means your engine can breathe more freely and means getting the exhaust gases out is not limiting how quickly it can get air in. A badly designed exhaust can actually reduce torque low down the rev range, but Milltek have the depth of engineering know-how necessary to increase top-end without loss of drivability. Genuine power increases are often achievable with just the exhaust, but it gets really good when the exhaust is paired up with new software and other breathing mods for the engine. Milltek use either hard-wearing T304 stainless steel or titanium. Both are durable and sound great. Milltek put a lot of work into engineering the sound of the exhaust. Anyone can make a car louder. Milltek carefully tune the silencers in the system to offer a sporty, but refined sound. The exhaust is designed to sound fierce when you drive the car hard, but not to drone at idle or when cruising. On some systems there will be a choice of “resonated” or “non-resonated”. Resonated typically have either extra or quieter silencers in place and will be quieter. Milltek take fit and build quality very seriously. Any of their exhausts should just fit directly in place of the original equipment. For a great all-round upgrade, that will leave your car road-legal and refined, but increase power and noise a Milltek Cat-Back is easy to recommend. PLEASE NOTE: Image is for illustration purposes only. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone, fax and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. OVERSEAS DELIVERIES: We can send items anywhere in the world! Pay with a credit/debit card or cash and collect in person from our HQ in Wrexham, North Wales (ask for details before coming in). Finance options also available subject to status (minimum spend required), call for details. We work hard to bring you the most competitive pricing available and we wont stop there. If you have seen the same product elsewhere for less, let us know and well endeavour to match the price. Printed evidence of offer may be required; our staff will verify the offer. The competitor’s price must be available to all customers and exclude any personal discounts. We will only price match on like for like purchasing routes i. This price promise cannot be used in conjunction with any offer or discount. This price promise is undertaken in good faith and within the bounds of the law; it can be withdrawn at any time without notice. Final decision on the validity of a price promise request will rest with Demon Tweeks. For the sizing guide. Oil, Fluid & Liquid Shop. Demon Tweeks, 75 Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG, United Kingdom. GB 840 2501 70. The item “Milltek 3.00in Cat Back Race Exhaust System Non-Res Fits Audi S3 8V 14-15″ is in sale since Tuesday, February 9, 2021. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “demontweeksdirect” and is located in Wrexham. This item can be shipped worldwide.- Manufacturer: Milltek
- Brand: Milltek
- MPN: SSXAU533
- EAN: Does not apply
- Manufacturer Part Number: SSXAU533
Tags: 14-15, 300in, audi, back, exhaust, fits, milltek, non-res, race, system
-
90-93 Comments Off
For 90-93 Accord Catback Exhaust System 3″ Piping w/ 4.5″ Muffler Tip + Silencer. 100% brand new items, never used or installed. High performance stainless steel catback exhaust system w/ 4.5 muffler tip. Manufactured from high quality T-304 mandel-bent stainless steel piping & TIG welded CNC-machined flanges for superior strength & durability. Made by OEM approved manufacturers with materials that meets or exceeds strict OEM requirements. Racing spec design to gain more horsepower, faster response, averaging 15-20 extra HP. Produces an aggressive, deep exhaust note while maximizing smooth exhaust air flow rate. Includes silencer + gaskets, bolts, & pictured hardware. Muffler Tip Diameter: 4.5. Piping Diameter: 3.0. Not intended for street applications, this item is intended for racing & competition purposes only. No installation guides are included, we highly recommend seeking professional installation. Fits models with F22A 2.2L SOHC l4 engines only. I tems may not always be in stock. S hipping Carriers used will be based on weight/length/destination of the customer. G round Carriers do not deliver to PO BOX and additional charges will be required. Canada and International Countries. W e cannot mark merchandise values below value or mark items as “gifts” – US and International Government Regulations prohibit such behavior. T he customer is responsible for making any changes prior to purchasing. PO BOX , GU , PR , HI , AK , APO/FPO. 9.50% California Customers / 8.25% Texas Customers. A ll return merchandise must be authorized and assigned with a RETURN AUTHORIZATION NUMBER R. N from our customer service representatives before returning a product. M erchandise return without R. Please write the R. T he R. I t is the responsibility of the customer to repack the items for the return. Return labels are not given to return these items. W e specialize in aftermarket automotive car replacement parts carrying a variety of products to power, improve, or just make your ride more enjoyable. W e are a distributor for affordable and quality products who sell the public. O ur feedback showers that we’ve been doing this for a while and work to accommodate your every needs. P lease note it may take up to 24-48 hours before a response is received by the messaging system, but rest assured that your questions will be answered as soon as possible. C ommunication is very important and we will try our best to assist all our customers with any concerns. H ave a question? And we will reply to your message. W e are closed during the weekend and holidays and cannot respond to emails during those times but will respond as soon as we return. Q uestions are answered in the order they arrive as quickly as possilble. The item “For 90-93 Accord Catback Exhaust System 3 Piping with 4.5 Muffler Tip + Silencer” is in sale since Wednesday, December 4, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “awesomecarparts” and is located in La Puente, California. This item can be shipped worldwide.- Installation Guide: Not Included; Professional installation is highly recommended
- Other Part Number: Performance Racing Stainless Steel Muffler Cat Back Piping System
- Warranty: Yes
- Brand Type: Aftermarket Branded
- Restricted States: California, Maine, New York
- Fitment Type: Performance/Custom
- Manufacturer Part Number: 1990 1991 1992 1993 90 91 92 93 CB6 CB7 CB9 CB-HD2190030BK-BVG8F
- Quantity: 1 x Catback Exhaust System + Pictured Hardware
- Mounting Hardware Included: Yes
- Tip Wall Type: Single Wall Tip
- Material: Stainless Steel
- Placement on Vehicle: Rear
- Brand: Awesomecarparts
- Specifics: Fits Models with F22A 2.2L SOHC l4 Engines Only
- Type: Cat Back
- Interchange Part Number: 2.2 2.2L SOHC F22A JDM 18307SM4505 CB1 CB2 CB3 4.5″ N1 3.0″ Pipe
- Compatible/Replacement For: 1990-1993 Honda Accord 2.2L SOHC
- Exit Type: Single
- Connection Type: 3 Bolt
- Surface Finish: Coated
- Tip Shape: Round Straight Cut
- Diameter: 4.5in.
Tags: 90-93, accord, catback, exhaust, muffler, piping, silencer, system
-
90-93 Comments Off
For 90-93 Honda Accord l4 2/4DR JDM Catback Exhaust System 60mm Piping 4.5 Tip. 100% brand new items, never used or installed. High performance stainless steel catback exhaust system w/ 4.5 muffler tip. Manufactured from high quality T-304 mandel-bent stainless steel piping & TIG welded CNC-machined flanges for superior strength & durability. Made by OEM approved manufacturers with materials that meets or exceeds strict OEM requirements. Racing spec design to gain more horsepower, faster response, averaging 15-20 extra HP. Produces an aggressive, deep exhaust note while maximizing smooth exhaust air flow rate. Includes silencer + gaskets, bolts, & pictured hardware. Muffler Tip Diameter: 4.5. Piping Diameter: 2.35. Not intended for street applications, this item is intended for racing & competition purposes only. No installation guides are included, we highly recommend seeking professional installation. Fits models with F22A 2.2L SOHC l4 engines only. I tems may not always be in stock. S hipping Carriers used will be based on weight/length/destination of the customer. G round Carriers do not deliver to PO BOX and additional charges will be required. Canada and International Countries. W e cannot mark merchandise values below value or mark items as “gifts” – US and International Government Regulations prohibit such behavior. T he customer is responsible for making any changes prior to purchasing. PO BOX , GU , PR , HI , AK , APO/FPO. 9.50% California Customers / 8.25% Texas Customers. A ll return merchandise must be authorized and assigned with a RETURN AUTHORIZATION NUMBER R. N from our customer service representatives before returning a product. M erchandise return without R. Please write the R. T he R. I t is the responsibility of the customer to repack the items for the return. Return labels are not given to return these items. W e specialize in aftermarket automotive car replacement parts carrying a variety of products to power, improve, or just make your ride more enjoyable. W e are a distributor for affordable and quality products who sell the public. O ur feedback showers that we’ve been doing this for a while and work to accommodate your every needs. P lease note it may take up to 24-48 hours before a response is received by the messaging system, but rest assured that your questions will be answered as soon as possible. C ommunication is very important and we will try our best to assist all our customers with any concerns. H ave a question? And we will reply to your message. W e are closed during the weekend and holidays and cannot respond to emails during those times but will respond as soon as we return. Q uestions are answered in the order they arrive as quickly as possilble. The item “For 90-93 Honda Accord l4 2/4DR JDM Catback Exhaust System 60mm Piping 4.5 Tip” is in sale since Wednesday, December 4, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “awesomecarparts” and is located in La Puente, California. This item can be shipped worldwide.- Installation Guide: Not Included; Professional installation is highly recommended
- Other Part Number: Performance Racing Stainless Steel Muffler Cat Back Piping System
- Warranty: Yes
- Brand Type: Aftermarket Branded
- Restricted States: California, Maine, New York
- Fitment Type: Performance/Custom
- Manufacturer Part Number: 1990 1991 1992 1993 90 91 92 93 CB6 CB7 CB9 CB-HD21900BK-ACP-D1
- Quantity: 1 x Catback Exhaust System + Pictured Hardware
- Mounting Hardware Included: Yes
- Tip Wall Type: Single Wall Tip
- Material: Stainless Steel
- Placement on Vehicle: Rear
- Brand: Awesomecarparts
- Specifics: Fits Models with F22A 2.2L SOHC l4 Engines Only
- Type: Cat Back
- Interchange Part Number: 2.2 2.2L SOHC F22A JDM 18307SM4505 CB1 CB2 CB3 4.5″ N1 2.35″ Pipe
- Compatible/Replacement For: 1990-1993 Honda Accord 2.2L SOHC
- Exit Type: Single
- Connection Type: 3 Bolt
- Surface Finish: Coated
- Tip Shape: Round Straight Cut
- Diameter: 4.5in.
Tags: 24dr, 60mm, 90-93, accord, catback, exhaust, honda, piping, system
-
exhaust Comments Off
Magnaflow Tuner Store See our other listings. We opened our doors in December 2005. Tuner Store is dedicated in providing you with the best quality performance parts and accessories for your high performance vehicle. There are now hundreds of “performance tuners” on the web. Many of which sell products they are not authorized to sell. We can help you choose the parts based on your individual budget and goals. Here at Tuner Store we believe in quality over quantity. We believe in stocking a large variety of products, and carry a constantly expanding, extensive inventory. If we don’t have it in stock we can get almost anything you request. Products must be in same/NEW condition in it’s original packaging. Charges will apply for all parts missing. ALL SERIAL NUMBERS HAVE BEEN RECORDED. We are unable to guarantee a specific carrier. This means orders may arrive in multiple boxes or at different times. Any other use, including recreational off- road use, may be in violation of local, state, and Federal laws. Tuner Store does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the responsibility of the consumer. These items are controlled by the U. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s), herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. The item “Exhaust System Kit-Race Series Stainless Axle-Back System fits 16-19 Camaro 6.2L” is in sale since Tuesday, March 30, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “magnaflow-tuner-store” and is located in Philadelphia, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.- Manufacturer Part Number: 19266
- Brand: Magnaflow
Tags: 16-19, axle-back, camaro, exhaust, fits, kit-race, series, stainless, system
-
megan Comments Off
Megan Racing Axle Back Exhaust System Dual Canister Fits G37 Coupe 08-13 3.7 VQ. Our Axle-Back Exhaust Systems for the Mazda Miata MX-5 replaces the typically quiet and restrictive factory muffler and exhaust components with a larger, free flowing straight-thru type muffler. Whereas OEM muffler constructions typically rely on multiple chambers to bounce and absorb sound frequencies. This results in the increase of backpressure as exhaust gasses are deflected back and forth robbing engine response and power. Megan Racing Axle-Back Exhausts system utilize straight-thru perforated glass-pack mufflers dramatically decreasing exhaust backpressure as the gasses are allowed a straight, unrestricted passage while sound frequencies are absorbed by the glass-pack fiber material providing a nice, mellow tone. NOTE: All Megan Racing Exhaust and Suspension products are deemed for “off-road use only”– please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws. Within the lower 48 U. MEGAN RACING AUTHORIZED DISTRIBUTOR. We will choose the suitable carrier depending on the products and sizes. A replacement is sent out immediately once the package arrives to our warehouse. Please retain all boxes and other packaging material as package may be subject to inspection by the carrier. All products are made for USDM Spec. (United States market specifications) unless otherwise stated in the application description. Exhaust and Suspension products are deemed for “off-road use only”– please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Please give us a reasonable amount of time for the claim/inspection process. We recommend having professional to install the products. Included on most of the items we sell. Please obtain some knowledge on the products before purchasing. We do that by maintaining excellent communication with our customers. Auctiva offers Free Image Hosting and Editing. Auctiva gets you noticed! Track Page Views With. Auctiva’s FREE Counter. The item “Megan Racing Axle Back Exhaust System Dual Canister Fits G37 Coupe 08-13 3.7L VQ” is in sale since Tuesday, June 22, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “always-bargains” and is located in West Covina, California. This item can be shipped worldwide.- Surface Finish: STAINLESS STEEL
- Manufacturer Part Number: MR-ABE-IG08
- Placement on Vehicle: Rear
- Brand: Megan Racing
- Warranty: 1 Year
Tags: 08-13, axle, back, canister, coupe, dual, exhaust, fits, megan, racing, system
-
25stainless Comments Off
You may also like. Tactical Wear Mechanics Gloves Men Safety Work Industrial Construction Driver. EGR Blank Plate Fit Opel Vauxhall 2.0 CDTi Euro 5 Astra J Insignia Zafira Toure. Fits BMW NOX SENSOR 11787587130 1er E81 E82 E87 E88 3er E90 E91 E92 LCI N43 NEW. DPF Diesel Particulate Filter Differential Pressure Sensor 076906051A Fits VW AD. 3 Universal Front Mount Intercooler FMIC 600x300x76mm Core 76mm Inlet Outlet. EGR Valve + Gasket Fits VW Passat 3B3/3B6 Sharan Transporter T5 1.9 TDI 00-10. 45 & 90 Degree Silicone Hose Rubber Joiner Bend Straight Reducer Elbows Coupler. 2.25 UNIVERSAL FRONT MOUNT INTERCOOLER 550x230x65mm Aluminum Core 57mm Inlet. STAINLESS EXHAUST DECAT DOWNPIPE KIT FIT NISSAN SILVIA 200SX S13 CA18DET 1988-94. EGR Valve For FORD Focus MK2 Mondeo MK4 C-MAX Galaxy Kuga S-MAX 2.0 TDCi 2006-15. Upgrated Front Mount Intercooler FMIC Fit Ford Focus MK2 ST225 Gen 3 Stage 2. 2.5 ALUMINIUM FRONT MOUNT INTERCOOLER Fit FORD ESCORT SIERRA COSWORTH RS500. Silicone Hose Rubber Joiner Bend Straight Reducer Elbows Coupler 45 & 90 Degree. 42MM ALLOY RADIATOR RAD fit VW GOLF MK1 MK2 1.6 1.8 GTI 16V Corrado Scirocco 1.8. Ford Focus MK2 ST225 models. Exactly same as picture showed. 1 Catback Exhaust System. In order to improve the performance of your vehicle, we re-designed the original car parts. The re-designed item will perfectly fit onto 99.8%of these cars on the road, however there are always few exceptions need extra work, such as re-position the hangers, pins, brackets etc, minor cutting and welding work could be involved. The fitting of item requires specialists knowledge and expertise, we strongly suggest that you needto understand what you will be doing or required to do , to make the item fit. We are not responsible for any fitting costs may be involved, and it’s entirely the buyers responsibility to cover any costs may occur during the whole fitting process. Get The Right Parts You After. SUPEEDMOTOR are an established company which has a rich knowledge of automotive accessories. We stock most models of auto parts including Japanese, European, Korean and. Are an established company which has a rich knowledge of automotive accessories. Stock around 3500 different models of radiators, condensers, coolant pipes, fans. Intercooler /kits, coilovers, lift kits and some performance parts. We have over 4000 square meters. Ware house in Australian, New Zealand, HK, USA and UK, our sales teams have professional knowledge of automotive parts, so our service is second to none. We will go out of our way. To get you what you need on time, with the best quality and at best price. We do not list everything online, so if you have problem to identify your item or have any technical issues, please send us a message. We will be happy to help you find the right parts at the right price. We use a variety of couriers to get your items to you as fast as possible. Sellers are not responsible for service transit time. Transit times are provided by the carrier. We must be notified within as soon as possible of you receiving the damaged item. We are very careful sending out goods, but in the off chance of you receiving the wrong item please follow the following guideline. All items that are approved for return must be received back in the original packaging and not installed, modified or damaged in any way. We must be notified within 7 days of you receiving the item that you intend to return. The item/s are not opened, used, worn or damaged, and are in perfect condition when we receive them back. That you do not stick or write anything on the item itself or its packaging. We are not liable for any claim including claims arising from incorrect fitment, product modification, and fault design, the use of the product and any indirect special or consequential damage or injury or person, company or entity. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. MPLS SWITCH SPEED SENSOR AUTOMATIC TRANSMISSION FOR CITROEN RENAULT PEUGEOT. Radiator Hoses clamp Kits fit Land Rover Defender 300 Heater Bypass Top Bottom. AFTER CAT OXYGEN O2 LAMBDA SENSOR Fits BMW 116 118 120 316 318 320 525 530 i X1. Power Window Main Control Switch for VW Golf MK7 Passat Tiguan 5G0959857D 2013. GLOW PLUG TEMPERATURE SENSOR for PAJERO SHOGUN DELICA L200 SPORT 2.5 2.8 1984-04. Oxygen Sensor Fit BMW E38 E39 E46 E52 E53 E83 E85 0258005109 11781433940 2344683. 9inch 12V Universal Electric Radiator Cooling Fan Push Pull Kit Straight Blades. Universal Rotating Wash Brush Pressure Washer Hose Cleaner Car Cleaning Tool. INTERCOOLER PIPING FOR SUBARU IMPREZA WRX GC8 TURBO CLASSIC Couplers Kit 1992-00. THERMOSTAT WITH HOUSING FIT LAND ROVER FREELANDER 2 & RANGE ROVER EVOQUE 2.2 TD4. 40MM ALUMINIUM RACE RADIATOR RAD fit ROVER MG TF 115 120 135 160 1.6 1.8 AT 02. 2.75 STAINLESS EXHAUST FRONT PIPE DOWNPIPE FIT FORD FOCUS ST225 ST 225 RS 2005. STAINLESS T4 TOP MOUNT MANIFOLD EXHAUST fit TOYOTA SUPRA MK3 JZA70 7M GTE TURBO. Aluminum Intercooler fit Hyundai Santa FE FWD II CM Turbo Diesel 2.2 D4EB 06-12. 1x 4 Wires Oxygen Lambda O2 Sensor Probe For Vauxhall Opel Corsa C D 1.0 1.2 1.4. The item “2.5STAINLESS CAT BACK RACE EXHAUST SYSTEM FIT FORD FOCUS MK2 ST 225 ST225 05-11″ is in sale since Thursday, June 18, 2020. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exhausts & Exhaust Parts\Complete Exhaust Systems”. The seller is “redbox999″ and is located in Leicester. This item can be shipped worldwide.- Bore Size (mm): 76mm (2.5″)
- Brand: Supeedmotor
- Bundle Listing: Yes
- Classic Car Part: Yes
- Exhaust System Type: Cat Back
- Manufacturer Part Number: Does Not Apply
- Material: T304 Stainless Steel
- Unit Quantity: 1
- Unit Type: kg
- Type: Complete Exhaust System
Tags: 05-11, 25stainless, back, exhaust, focus, ford, race, st225, system
-
racing Comments Off
SERVICE AUSSIE MARKET SINCE 2003 – YOUR TRUSTED LOCAL BUSINESS!!!!! 4 STAINLESS TURBOBACK CATBACK EXHAUST FOR FORD FALCON FG XR6 TURBO 4.0L SEDAN. 4 DUMP PIPE INLET. 3 POLISEDH STAINLESS STEEL PIPING. TWIN TIP EXAHUST OUTLETS. GASKETS, BOLTS & NUTS INCLUDED. SOME IMAGEs FOR REFERENCE ONLY (NOT THE ACTUAL ITEM). Triple Nine Automotive (999Automotive) was established in 2003 with the goal of providing customers a one stop place for all their vehicle needs. With more than 2000 performance products in our warehouse. We are proud to say that we will be able to cater to your requirements. At the workshop, our mechanics are trained from standard mechanical repairs to performance modifications. Including suspension upgrades and a skilled in-house fabricator for your custom requirements. Equipped with a 4WD dynamometer from Dyno Dynamics. 999 Automotive provides aftermarket ECU tuning along with our customers being able to find out how much power their car produces in ShootOut mode. Our aim is to make our customers’ cars reliable, we want our customers to enjoy the fun of the modifications we perform to their cars. Therefore, the power figure is not the only thing we are concern about. We care for all the modifications that make your car run smooth. In addition, we offer car enthusiasts our technical experience and expertise as well as the ability to diagnose and rectify any mechanical problems of your car to perform better or run more cost efficient. Our showroom displays a wide range of products for both interior and exterior upgrades from appearance to performance. This can be paid in Australia Dollar. BANK DEPOSIT WITHIN AUSTRALIA. We will arrange the product for you and inform you when they are ready. We are more than happy to assist you. Please ensure that you read and acknowledge the following terms and conditions prior to placing your order with TRIPLE NINE AUTOMOTIVE. All prices and descriptions are subject to change without notice. Online Team – 999Automotive. The item “KS RACING TURBO BACK CATBACK SYSTEM FOR EXHAUST FALCON BA BF XR6 TURBO 4.0 SEDAN” is in sale since Wednesday, August 11, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Filters\Oil”. The seller is “999racing” and is located in Lidcombe, NSW. This item can be shipped worldwide.- Return Postage Charges: Buyer will pay for any return postage
- Item Picture: NOT the Actual Item (For Reference Only)
- Manufacturer Part Number: EXHAUST-KS-XR6-BABF-X
- Brand: KS RACING
Tags: back, catback, exhaust, falcon, racing, sedan, system, turbo
-
catback Comments Off
Catback Exhaust System 3 Muffler Pipe For 02-06 Sentra SE-R Spec-V 2.5L QR25DE. 100% brand new items, never used or installed. High performance stainless steel catback exhaust system w/ 4 muffler tip. Manufactured from high quality T-304 mandel-bent stainless steel piping & TIG welded CNC-machined flanges for superior strength & durability. Made by OEM approved manufacturers with materials that meets or exceeds strict OEM requirements. Racing spec design to gain more horsepower, faster response, averaging 15-20 extra HP. Produces an aggressive, deep exhaust note while maximizing smooth exhaust air flow rate. Utilizes pre-welded hangers for direct bolt-on fitment; no modifications required. Includes removable silencer + gaskets, bolts, & pictured hardware. Muffler Tip Diameter: 4.0. Piping Diameter: 3.0. Not intended for street applications, this item is intended for racing & competition purposes only. No installation guides are included, we highly recommend seeking professional installation. Fits models with QR25DE 2.5L DOHC l4 engines only. I tems may not always be in stock. S hipping Carriers used will be based on weight/length/destination of the customer. G round Carriers do not deliver to PO BOX and additional charges will be required. Canada and International Countries. W e cannot mark merchandise values below value or mark items as “gifts” – US and International Government Regulations prohibit such behavior. T he customer is responsible for making any changes prior to purchasing. PO BOX , GU , PR , HI , AK , APO/FPO. 9.50% California Customers / 8.25% Texas Customers. A ll return merchandise must be authorized and assigned with a RETURN AUTHORIZATION NUMBER R. N from our customer service representatives before returning a product. M erchandise return without R. Please write the R. T he R. I t is the responsibility of the customer to repack the items for the return. Return labels are not given to return these items. W e specialize in aftermarket automotive car replacement parts carrying a variety of products to power, improve, or just make your ride more enjoyable. W e are a distributor for affordable and quality products who sell the public. O ur feedback showers that we’ve been doing this for a while and work to accommodate your every needs. P lease note it may take up to 24-48 hours before a response is received by the messaging system, but rest assured that your questions will be answered as soon as possible. C ommunication is very important and we will try our best to assist all our customers with any concerns. H ave a question? And we will reply to your message. W e are closed during the weekend and holidays and cannot respond to emails during those times but will respond as soon as we return. Q uestions are answered in the order they arrive as quickly as possilble. The item “Catback Exhaust System 3 Muffler Pipe For 02-06 Sentra SE-R Spec-V 2.5L QR25DE” is in sale since Friday, February 14, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “awesomecarparts” and is located in La Puente, California. This item can be shipped worldwide.- Installation Guide: Not Included; Professional installation is highly recommended
- Other Part Number: Performance Racing Stainless Steel Cat Back QR25 QR25DE B15 SpecV
- Warranty: Yes
- Brand Type: Aftermarket Branded
- Restricted States: California, Maine, New York
- Fitment Type: Performance/Custom
- Manufacturer Part Number: 02 03 04 05 06 2002 2003 2004 2005 2006 JDM CB-NI5102030CH-972-U4
- Quantity: 1 x Catback Exhaust System w/ Silencer + Pictured Hardware
- Mounting Hardware Included: Yes
- Material: Stainless Steel
- Placement on Vehicle: Rear
- Brand: Awesomecarparts
- Specifics: Fits Models with QR25DE 2.5L DOHC l4 Engines Only
- Type: Cat Back
- Interchange Part Number: 20300ZG40A 201006Z900 SER Spec-V 2.5 2.5L DOHC 76mm 3″ 3IN Piping
- Exit Type: Single
- Fitment: 2002-2006 Nissan Sentra SE-R / SE-R Spec V (B15)
- Surface Finish: Polished
- Diameter: 4in.
Tags: 02-06, catback, exhaust, muffler, pipe, qr25de, se-r, sentra, spec-v, system
-
tsudo Comments Off
Tsudo 2011 Scion TC S2 Catback Exhaust System – YouTube. Video will open in a new window. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Manufactured from 100% stainless steel with silver polished finish. T-304 stainless steel will never rust and provides the ultimate durability. CNC machine mandrel-bent 2.5 stainless steel tubing for maximum exhaust flow. CNC cut flanges and robotic TIG welded. Muffler features 2.5″ inlet with 4″ slanted exhaust tip. Inner canister consists of steel wool and white fiberglass which provides lasting lifetime performance and consistent sound. 25% lighter than stock OEM exhaust system. Utilizes the factory exhaust hangars. Includes all necessary flanges, bolts, and gaskets for installation. Easy bolt-on installation with typical hand tools, no welding or cutting required. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17″ is in sale since Thursday, September 23, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped worldwide.- Modified Item: Yes
- Diameter: 2.5in.
- Tip Shape: Round Angle Cut
- Type: Cat Back
- Brand: Tsudo Performance
- Tip Wall Type: Single Wall Tip
- Warranty: 90 Day
- Mounting Hardware Included: Yes
- Exit Type: Single
- Country/Region of Manufacture: Taiwan
- Material: Stainless Steel
- Surface Finish: Polished
- Manufacturer Part Number: 20-9377
- Placement on Vehicle: Rear
- Part Brand: Tsudo
- Application: Scion TC 2011 2012 11 12 bolt-on cat back exhaust
- Fitment Guide!: 562-888-0188
- Fitment Type: Performance/Custom
Recent Comments