Race Exhaust Back

• 29Feb

  VW Golf MK6 R 2.0 TSI Milltek 3” Race Cat Back Exhaust Non Res + GT100 Tips

  golf Comments Off
  
  
  
  
  VW Golf MK6 R 2.0 TSI Milltek Sport 3 Race Cat Back Exhaust GT100 Tips Non Resonated. Genuine Brand New Milltek Sport 3 Race Non Resonated Cat Back Exhaust System. Race Cat Back Exhaust System. Twin 100mm GT100 Polished Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high performance parts that will in most cases out live the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXVW218 Cat Back System. MSVW399REP Centre Silencer Replacement Pipe. MSVW400 Rear Silencer Assembly (no valve). MSVW373 x2 Polished Tips Dual GT100. Pipe Diameter: 3.00-inch (76.20mm). We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Performance and Genuine OEM Parts. Car Gaming Racing Simulators. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. All other Non VW Parts. VW Golf MK6 R 2.0 TSI Milltek 3” Race Cat Back Exhaust Non Res + GT100 Tips. RC + Scale Models. For 1000s more of the best available parts. The item “VW Golf MK6 R 2.0 TSI Milltek 3” Race Cat Back Exhaust Non Res + GT100 Tips” is in sale since Saturday, April 30, 2016. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in UK. This item can be shipped worldwide.

  • Brand: Milltek
  • Manufacturer Part Number: SSXVW218
  • Type: Cat Back Exhaust System

  
  
  

  Tags: back, exhaust, golf, gt100, milltek, race, tips

• 29Feb

  MBRP Black Cat Back Exhaust 2015-2018 Ford Mustang 2.3L ECOBOOST Race Version

  mbrp Comments Off
  
  
  
  
  
  Will Not Fit Convertible. BRAND NEW AXLE BACK MBRP EXHAUST SYSTEM. ALL KITS ARE COMPLETE WITH ALL CLAMPS TO INSTALL. Fits: 15-18 Ford Mustang 2.3L Ecoboost. Black Series Cat Back Stainless Steel System With Mufflers, 3 Inch Pipe Diameter Single Exhaust With Dual Split Rear Exit, Race Version 4-1/2 Inch Black Tips. MBRP Part Number S7275BLK. Built To Perform: Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better. Dyno Proven: From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Your MBRP Performance System Gets Exhaust Out Fast. Easy Installation: Bolt-On, No Weld Design Makes Installation A No Hassle One. Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finish is specifically formulated to withstand the extreme heat and abrasive conditions an exhaust system is exposed to. MBRP’s performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your truck will use less gas, last longer and perform better. Your item that you are returning must be brand new and not EVER installed or used. You can not return a used item. Every return will be inspected to make sure it is brand new and complete. Once we give you that number we will provide a return address as well. The item “MBRP Black Cat Back Exhaust 2015-2018 Ford Mustang 2.3L ECOBOOST Race Version” is in sale since Monday, April 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “theaftermarketshop” and is located in Pittston, Pennsylvania. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • Country/Region of Manufacture: United States
  • Diameter: 3in.
  • Interchange Part Number: MBRP S7275BLK
  • Material: Stainless Steel
  • Compare: Banks Magnaflow Ford Mustang Ecoboost Exhaust
  • Years: 15 16 17 18 Mustang Ecoboost Performance Exhaust
  • Years 2: 2015 2016 2017 2018 2.3L Mustang Ecoboost Exhaust
  • Type: Cat Back
  • UPC: 882963107251
  • Muffler: Dual Muffler
  • Inlet/Outlet: Single Inlet Single Outlet
  • Surface Finish: Black Coated
  • Manufacturer Part Number: S7275BLK
  • Other Part Number: 2.3L Ford Mustang Ecoboost MBRP Exhaust System
  • Brand: MBRP
  • Warranty: Yes
  • Mounting Hardware Included: Yes
  • Exit Type: Dual

  
  
  

  Tags: 2015-2018, back, black, ecoboost, exhaust, ford, mbrp, mustang, race, version

• 28Feb

  Milltek Citroen DS3 1.6 16V DSport & Racing Exhaust Cat Back Non Res SSXCN102

  milltek Comments Off
  
  
  
  
  
  
  
  
  BRAND NEW MILLTEK STAINLESS STEEL CAT BACK SYSTEM NON RESONATED TO FIT CITROEN DS3. A Milltek Stainless Steel. Citroen DS3 1.6 THP 16v. 155bhp DSport & DS3 Racing 207bhp. MSCN123REP – Non-Resonated Front Section. MSCN124 – Axle Pipe. MSCN125 – Rear Silencer Assembly. MSVW370 x 2 – Trim Assembly Twin 80mm GT80. Pipe Diameter Size O. 2.50 (63.50mm). The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. Life Time Guarantee For The First Purchaser. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether youâre unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge â noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. UK MAINLAND & MOST AREAS OF SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. There is an Additional Courier Charge. To Send Items To These Areas Listed Below. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. The item “Milltek Citroen DS3 1.6 16V DSport & Racing Exhaust Cat Back Non Res SSXCN102″ is in sale since Wednesday, September 27, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exhausts & Exhaust Parts\Other Exhaust Parts”. The seller is “roadrunnermotorsport” and is located in Nottingham. This item can be shipped worldwide.

  • Manufacturer: Citroen
  • Subtype: Cat Back System – Non-Resonated
  • Type: Exhaust
  • Part Manufacturer: Milltek
  • Model/ Series: DS3 1.6 THP 16v DSport 155bhp & DS3 Racing 207bhp
  • Country/Region of Manufacture: United Kingdom
  • Part Manufacturer Number: SSXCN102
  • Manufacturer Part Number: SSXCN102
  • Other Part Number: SSXCN102
  • Brand: Milltek
  • Intended Use: Modification/ Enhancement

  
  
  

  Tags: back, citroen, dsport, exhaust, milltek, racing, ssxcn102

• 28Feb

  Dual 2.50 Header Back Exhaust System /w Mufflers 55-57 Chevrolet Cars V8 Engine

  dual Comments Off
  
  
  
  
  
  Better Products, Better Pricing Our Products Are Top Quality SS409 Stainless Steel High Quality Band Clamps Included At No Extra Cost Other Competitors Are Using Low Quality Aluminized Steel. This listing is for a brand new. High Performance SS409 Stainless Steel Dual Header Back Exhaust System. The system is made. Specifically for vehicle models listed below. You’re going to love the deep, rich and throaty sound from our performance exhaust system. It has been expertly engineered to provide an aggressive muscular exterior sound while minimizing interior resonance. The result is a perfectly tuned exhaust note. Does Not Fit Convertible Or Wagon Models. High Performance Dual Header Back Exhaust System. Aggressive Exterior Sound Level & Moderate Interior Sound. Tube Diameter: 2.50 Pipes. Two High Flow Performance Mufflers & Tips Are Included. Improve Sound, Horsepower & Torque. TIG Weld & Mandrel-Bent For Maximum Performance. Bolts, Hangers & Exhaust Clamps Included As Shown. Intended For Professional Installation. Please verify the part received before installation. We are not liable for direct, indirect, incidental, consequential damages, loss of use or any other expenses. Customer fully understands and agrees to accept all responsibilities associated with the use of this product. The item “Dual 2.50 Header Back Exhaust System /w Mufflers 55-57 Chevrolet Cars V8 Engine” is in sale since Wednesday, October 31, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “worldwideperformance” and is located in Houston, Texas. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.

  • UPC: 750221040391
  • Interchange Part Number: Flowmaster Summit Racing
  • Type: Cat Back
  • Other Part Number: Magnaflow MBRP AFE Heartthrob
  • Brand: Dual Performance Racing
  • Warranty: 1 Year
  • Surface Finish: Stainless Steel
  • Manufacturer Part Number: Dual Pickup Truck

  
  
  

  Tags: 55-57, back, cars, chevrolet, dual, engine, exhaust, header, mufflers, system

• 27Feb

  Dual Split Header Back Exhaust Muffler System 68-70 Mopar/Dodge/Plymouth B Body

  dual Comments Off
  
  
  
  
  
  This listing is for a brand new. Dual 3.00 Header-Back Exhaust System With Mufflers Inlcuded. The system is made. Specifically for vehicle models listed below. You’re going to love the deep, rich and throaty sound from our performance exhaust system. It has been expertly engineered to provide an aggressive muscular exterior sound while minimizing interior resonance. The result is a perfectly tuned exhaust note. High Performance Dual 3 Header Back Exhaust System. Aggressive Exterior & Interior Sound Level. Tube Diameter: 3.00 Inlet & Outlet. Two (2) High Flow Performance Muffler. Improve Sound, Horsepower & Torque. TIG Weld & Mandrel-Bent For Maximum Performance. Bolts, Hangers & Exhaust Clamps Included As Shown. Top Quality Products & Affordable Pricing. Intended For Professional Installation. Please verify the part received before installation. We are not liable for direct, indirect, incidental, consequential damages, loss of use or any other expenses. Customer fully understands and agrees to accept all responsibilities associated with the use of this product. The item “Dual Split Header Back Exhaust Muffler System 68-70 Mopar/Dodge/Plymouth B Body” is in sale since Friday, May 31, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “worldwideperformance” and is located in Houston, Texas. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.

  • Type: Header Back
  • Brand: Dual Performance Racing
  • Manufacturer Part Number: Dodge Chrysler Exhaust
  • Interchange Part Number: Flowmaster Summit Racing
  • Other Part Number: Magnaflow MBRP AFE Heartthrob
  • Material: Aluminized Steel
  • Surface Finish: Aluminized Steel
  • Warranty: 1 Year
  • UPC: 750221041381

  
  
  

  Tags: 68-70, back, body, dual, exhaust, header, mopardodgeplymouth, muffler, split, system

• 27Feb

  Stainless Dual 3 Cat Back Exhaust System 05-10 Chrysler 300 C 300C SRT8 6.1L V8

  stainless Comments Off
  
  
  
  
  
  Better Products, Better Pricing Our Products Are Top Quality SS409 Stainless Steel High Quality Band Clamps Included At No Extra Cost. This listing is for a brand new. High Performance SS409 Stainless Steel Dual 3.00 Cat Back Exhaust System. The system is made. Specifically for vehicle models listed below. You’re going to love the deep, rich and throaty sound from our performance exhaust system. It has been expertly engineered to provide an aggressive muscular exterior sound while minimizing interior resonance. The result is a perfectly tuned exhaust note. Will Only Fit SRT8 Models. Excludes All Non-SRT8 2.7L/3.5L/5.7L Models. High Performance Dual 3.00 Back Exhaust System. Aggressive Exterior Sound & Moderate Interior Sound. Tube Diameter: 3.00 Pipes. Two High Flow Performance Mufflers & Tips Are Included. Improve Sound, Horsepower & Torque. TIG Weld & Mandrel-Bent For Maximum Performance. Bolts, Hangers & Exhaust Clamps Included As Shown. Intended For Professional Installation. Please verify the part received before installation. We are not liable for direct, indirect, incidental, consequential damages, loss of use or any other expenses. Customer fully understands and agrees to accept all responsibilities associated with the use of this product. The item “Stainless Dual 3 Cat Back Exhaust System 05-10 Chrysler 300 C 300C SRT8 6.1L V8″ is in sale since Wednesday, January 31, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “worldwideperformance” and is located in Houston, Texas. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.

  • Interchange Part Number: Flowmaster Summit Racing
  • Type: Cat Back
  • Other Part Number: Magnaflow MBRP AFE Heartthrob
  • Brand: Dual Performance Racing
  • Warranty: 1 Year
  • Surface Finish: Stainless Steel
  • Manufacturer Part Number: Stainless Steel SS409
  • UPC: 750221040483

  
  
  

  Tags: 05-10, 300c, back, chrysler, dual, exhaust, srt8, stainless, system

• 26Feb

  Stainless Dual 3 Cat Back Exhaust System 05-10 Dodge Magnum/Charger SRT8 6.1L

  stainless Comments Off
  
  
  
  
  
  Better Products, Better Pricing Our Products Are Top Quality SS409 Stainless Steel High Quality Band Clamps Included At No Extra Cost. This listing is for a brand new. High Performance SS409 Stainless Steel Dual 3.00 Cat Back Exhaust System. The system is made. Specifically for vehicle models listed below. You’re going to love the deep, rich and throaty sound from our performance exhaust system. It has been expertly engineered to provide an aggressive muscular exterior sound while minimizing interior resonance. The result is a perfectly tuned exhaust note. Will Only Fit SRT8 Models. Excludes All Non-SRT8 2.7L/3.5L/5.7L Models. High Performance Dual 3.00 Back Exhaust System. Aggressive Exterior Sound & Moderate Interior Sound. Tube Diameter: 3.00 Pipes. Two High Flow Performance Mufflers & Tips Are Included. Improve Sound, Horsepower & Torque. TIG Weld & Mandrel-Bent For Maximum Performance. Bolts, Hangers & Exhaust Clamps Included As Shown. Intended For Professional Installation. Please verify the part received before installation. We are not liable for direct, indirect, incidental, consequential damages, loss of use or any other expenses. Customer fully understands and agrees to accept all responsibilities associated with the use of this product. The item “Stainless Dual 3 Cat Back Exhaust System 05-10 Dodge Magnum/Charger SRT8 6.1L” is in sale since Wednesday, January 31, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “worldwideperformance” and is located in Houston, Texas. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.

  • Interchange Part Number: Flowmaster Summit Racing
  • Type: Cat Back
  • Other Part Number: Magnaflow MBRP AFE Heartthrob
  • Brand: Dual Performance Racing
  • Warranty: 1 Year
  • Surface Finish: Stainless Steel
  • Manufacturer Part Number: Stainless Steel SS409
  • UPC: 750221040476

  
  
  

  Tags: 05-10, back, dodge, dual, exhaust, magnumcharger, srt8, stainless, system

• 26Feb

  Milltek Mercedes A45 AMG Cat Back Exhaust Non Resonated Race Non Valved SSXMZ115

  milltek Comments Off
  
  
  
  Price Shown is at least 10% off the RRP. Mercedes A-Class A45 AMG 2.0 Turbo 2012 and later. Non Resonated Race Non Valved (Loudest). F5141: Adapter Milltek Catback to OE Downpipe. MSMZ89: Flexible Connecting Pipe. MSMZ90REP: Front Silencer Bypass. MSMZ91: Centre Connection Pipe. MSRR11 x2: Outlet Pipes (LH & RH). Bore Size (pipe diameter). 3.00 (76.20mm). Remapping is recommended when fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sportcats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. With over 30 years continuous experience, in developing performance exhaust. Milltek have now become a market leader in key marques. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Milltek Sport exhausts have a genuine performance edge, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and drive-ability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. The item “Milltek Mercedes A45 AMG Cat Back Exhaust Non Resonated Race Non Valved SSXMZ115″ is in sale since Sunday, August 26, 2018. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in Grays. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • Country/Region of Manufacture: United Kingdom
  • Manufacturer Part Number: SSXMZ115
  • Brand: Milltek
  • Material: T304 Stainless Steel

  
  
  

  Tags: back, exhaust, mercedes, milltek, race, resonated, ssxmz115, valved

• 25Feb

  Stainless Steel 2.5 Cat Back Exhaust Muffler System 05-10 Ford Mustang GT 4.6L

  stainless Comments Off
  
  
  
  
  
  Top Quality SS409 Stainless Steel 2.50 Full Cat Back Exhaust Muffler System Two Polished Stainless Steel Tips Included. This listing is for a brand new. High Performance SS409 Stainless Steel Dual Cat Back Exhaust System. The system is made. Specifically for vehicle models listed below. You’re going to love the deep, rich and throaty sound from our performance exhaust system. It has been expertly engineered to provide an aggressive muscular exterior sound while minimizing interior resonance. The result is a perfectly tuned exhaust note. High Performance Dual Cat Back Exhaust System. Nice Deep Exhaust Tone & Moderate Sound Level. Dual Polished Stainless Exhaust Tips Included. Improve Sound, Horsepower, Torque & Throttle Response. TIG Weld & Mandrel-Bent For Maximum Performance. Bolts, Gaskets, Hangers & Exhaust Clamps Included As Pictured. Please verify the part received before installation. We are not liable for direct, indirect, incidental, consequential damages, loss of use or any other expenses. Customer fully understands and agrees to accept all responsibilities associated with the use of this product. The item “Stainless Steel 2.5 Cat Back Exhaust Muffler System 05-10 Ford Mustang GT 4.6L” is in sale since Friday, November 22, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “worldwideperformance” and is located in Houston, Texas. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.

  • Brand: Performance Exhaust Kit
  • Manufacturer Part Number: CatBack Kit
  • Type: Cat Back
  • Interchange Part Number: Performance Racing
  • Other Part Number: MBRP Magnaflow AFE Flowmaster
  • Material: Stainless Steel
  • Surface Finish: Stainless Steel
  • Warranty: Yes
  • UPC: 750221041428

  
  
  

  Tags: 05-10, back, exhaust, ford, muffler, mustang, stainless, steel, system

• 25Feb

  Milltek Non-Res Cat-Back Exhaust for VW Transporter T5 1.9TDI SWB SSXVW200

  milltek Comments Off
  
  
  
  SSXVW200 Milltek Cat-Back Exhaust System VW Transporter. Milltek Cat-Back Exhaust System. Milltek Part Code: SSXVW200. VW Transporter 1.9TDI 2WD & 4Motion SWB [85/104ps]. Pipe Diameter: 69.85mm (2.75). IMPORTANT Please be aware that pictures are for illustation purposes only. Milltek have over 30 years experience in performance exhaust manufacture and design. Milltek offer an ever expanding range that draws on years of experience and technical expertise. Originally Milltek concentrated on a few key brands (Audi, VW, Porsche, Mini and BMW) however over the last few years the applications have grown to include many more main stream performance cars. Milltek sports exhausts are manufactured from high quality type 304 aircraft grade stainless steel. The material is anti magnetic and is the best quality stainless available. This superb stainless steel is used on all Milltek exhaust pipe work and silencer boxes. Mandrel bending ensures full flow bends for better gas flow and all Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. We sell over 250,000 performance car parts online! Sadly, it is impossible for us to stock all of these parts all of the time and ultimately this would only lead to increased prices. Sometimes a part may have to be manufactured or even imported from another country for you. Where we are informed of a delay we will do our best to keep you updated. We cannot guarantee product availability. Please do not schedule any work on your vehicle until you have received and fully inspected your parts. The item “Milltek Non-Res Cat-Back Exhaust for VW Transporter T5 1.9TDI SWB SSXVW200″ is in sale since Tuesday, March 6, 2018. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “venommotorsport” and is located in Preston. This item can be shipped to United Kingdom.

  • Full Fitment Check: See Listing Description
  • Reference OE/OEM Number: Cat-Back Exhaust System
  • Brand: Milltek
  • Manufacturer Part Number: SSXVW200VM1885
  • EC Approved: No
  • Type: Non-Resonated
  • Country/Region of Manufacture: United Kingdom
  • Warranty: Lifetime
  • Valvesonic: No
  • Race System: No
  • Pipe Diameter: 69.85mm (2.75″)
  • Product: Cat-Back Exhaust System

  
  
  

  Tags: 19tdi, cat-back, exhaust, milltek, non-res, ssxvw200, transporter

« Previous Entries