Race Exhaust Back

• 28Nov

  HKS Hi-Power Single Exit Racing Cat-Back Exhaust TT Ti for Honda S2000 AP1 / AP2

  hi-power Comments Off
  
  
  
  
  
  HKS Hi-Power Single Exit Racing Cat-Back w/Titanium Tip for Honda S2000 AP1/AP2 – 32701-BH001 – PLEASE CHECK THE ETA BEFORE ORDERING. The Ultimate High Spec Muffler Designed For 1000ps. HKS has developed one of our most powerful muffler. It’s for horse power of 1000. It’s for R35 GT-R with HKS GT1000 RACING SPEC. We purely pursuit the exhaust efficiency for super low exhaust resistance pressure. The RACING MUFFLER pipe diameter is f101.6 and didn’t have to narrow down. It connects to the main pipe by changing from the 2nd catalyzer so that we didn’t have to limit the diameter of the pipe because of the stock flange part. 00/01 – 05/10 AP1 / 05/11 – 09/09 AP2. HP(Titan) (RACING MUFFLER). Diameter of center pipe. Single Sided Exhaust for Turbo & Race Applications with adjustable length Ti tip. Off Road Use Only. Diameter of center pipe is the portion that has the largest diameter. Excluding silencer and tip. It is the condition with stock suspension. 2: Minimum road clearance between HKS muffler (Any parts included in the kit) and road surface. Therefore, it may be different from actual road clearance of the vehicle. The data is basically the condition with stock suspension. However, please understand that some items have data with low down spring or ride height adjustable suspension kit. Caution: Hook, bracket, stay may be changed without prior notice. VIP Motorsport is a UK Stockist of HKS. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vip-01513564444″ and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French Guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and Tobago, Vietnam, Israel.

  • Manufacturer Part Number: 32701-BH001
  • Brand: HKS

  
  
  

  Tags: cat-back, exhaust, exit, hi-power, honda, racing, s2000, single

• 27Nov

  Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI

  milltek Comments Off
  
  
  
  Milltek Res 3in R-Style Cat Back Race Exhaust System Suits VW Golf MK6 GTI. A Milltek Catback Exhaust System replaces the rear half of your exhaust from the catalytic converter back. This gives you the best of both worlds, improved sound and looks, but no worries about legality. Replacing stock pipework with wider, better designed Milltek pipework releases more performance from your cars engine. A new Milltek backbox and silencers will give your car a sporty, but refined sound. Sporty but refined sound. Lightweight and durable stainless steel. Outstanding fit and quality. A Cat-back exhaust hooks up to your factory system behind the main cat, replacing the pipework, silencers, and back-boxes with new Milltek kit. Millteks pipework will be carefully computer designed to increase flow-rate with wider pipework and carefully designed mandrel bends. This means your engine can breathe more freely and means getting the exhaust gasses out is not limiting how quickly it can get air in. A badly designed exhaust can actually reduce torque low down the rev range, but Milltek have the depth of engineering know-how necessary to increase top-end without loss of drivability. Genuine power increases are often achievable with just the exhaust, but it gets really good when the exhaust is paired up with new software and other breathing mods for the engine. Milltek use either hard-wearing T304 Stainless Steel or Titanium. Both are durable and sound great. Milltek put a lot of work into engineering the sound of the exhaust. Anyone can make a car louder. Milltek carefully tune the silencers in the system to offer a sporty, but refined sound. The exhaust is designed to sound fierce when you drive the car hard, but not to drone at idle or when cruising. On some systems there will be a choice of “resonated” or “non-resonated”. Resonated typically have either extra or quieter silencers in place and will be quieter. Milltek take fit and build quality very seriously. Any of their exhausts should just fit directly in place of the original equipment. For a great all-round upgrade, that will leave your car road-legal and refined, but increase power and noise a Milltek Cat-Back is easy to recommend. 27.11.2022, 07:05:59. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone, fax and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. OVERSEAS DELIVERIES: We can send items anywhere in the world! We work hard to bring you the most competitive pricing available and we won’t stop there. If you have seen the same product elsewhere for less, let us know and we’ll endeavour to match the price. Printed evidence of offer may be required; our staff will verify the offer. The competitor’s price must be available to all customers and exclude any personal discounts. We will only price match on like for like purchasing routes i. This price promise cannot be used in conjunction with any offer or discount. This price promise is undertaken in good faith and within the bounds of the law; it can be withdrawn at any time without notice. Final decision on the validity of a price promise request will rest with Demon Tweeks. For the sizing guide. Oil, Fluid & Liquid Shop. Demon Tweeks, 75 Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG, United Kingdom. GB 840 2501 70. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “demontweeksdirect” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Bahrain, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Brunei Darussalam, Egypt, Guernsey, Gibraltar, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Oman, Pakistan, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Kuwait, Philippines, Qatar, Vietnam.

  • Manufacturer: Milltek
  • Brand: Milltek
  • MPN: SSXVW243
  • Manufacturer Part Number: SSXVW243
  • NOTE: 2x 100mm Round GT Cerakote Black Tailpipes

  
  
  

  Tags: back, exhaust, golf, milltek, r-style, race, suits, system

• 27Nov

  Milltek 3 Race Cat Back Exhaust System Volkswagen Golf Mk6 GTi

  milltek Comments Off
  
  
  
  
  Milltek Sport exhaust systems are manufactured using aircraft grade stainless steel and machined to precision for maximum performance. Lower pressures within the Milltek Sport systems means performance is not restricted, resulting in greater driveability, sharper throttle response and, of course, increased horsepower and torque. On most after market exhaust systems, any power gains come with an unacceptable increase in volume levels. Milltek Sport pride themselves on offering exhaust systems that are engineered for performance rather than noise. Fitting a Milltek Sport exhaust will improve the tone of your engine’s voice, but will do so with a subdued deeper tone. Model: Golf GTi MK6. If you require your parts quickly then please check stock before ordering to avoid any unexpected lead time. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “amber-performance” and is located in this country: GB. This item can be shipped worldwide.

  • Modified Item: No
  • Country/Region of Manufacture: United Kingdom
  • Custom Bundle: No
  • Manufacturer Part Number: SSXVW244
  • Classic Car Part: No
  • Brand: Milltek

  
  
  

  Tags: back, exhaust, golf, milltek, race, system, volkswagen

• 26Nov

  Audi TT 1.8T 225 quattro Milltek 3? Race Non Res Cat Back Exhaust Polished Tips

  audi Comments Off
  
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. Audi TT 1.8T 225 quattro Milltek 3′ Race Non Res Cat Back Exhaust Polished Tips. Audi TT 1.8T 225 quattro Milltek Sport 3? Race Resonated Cat Back Exhaust System Polished GT100 Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System. Milltek Sport Resonated Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Fits 225 Model Only. Weight Saving: -5.60 kilos. Quieter – (this is a resonated system, quieter than non resonated, if you want the louder non resonated system please see other listing). Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of silencers. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXAU426 System. MSAU610: Rear Silencer Assembly. MSVW373 x2: Polished Tips. Pipe Diameter: 3.00 inch (76.20mm) 1.00 to 1.50 hour(s) to fit. +0.2 for valance fitting on required models {including removing OE system} Tip Style: Dual 100mm GT100. Please note pictures are for illustration purposes only. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Genuine OEM & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXAU426
  • Material: Stainless Steel
  • Classic Part: No
  • Country/Region of Manufacture: United Kingdom
  • Performance Part: Yes
  • Universal Fitment: No
  • Mounting Style: Clamp-On

  
  
  

  Tags: audi, back, exhaust, milltek, polished, quattro, race, tips

• 26Nov

  Milltek Citroen DS3 1.6 16V DSport & Racing Stainless Exhaust System Res EC/TUV

  milltek Comments Off
  
  
  
  
  
  
  BRAND NEW MILLTEK STAINLESS STEEL CAT BACK SYSTEM RESONATED TO FIT CITROEN DS3. A Milltek Stainless Steel. (Includes – Front Silencer, Axle Pipe, Rear Silencer Assembly & Trim Assembly Twin 80mm GT80). EC / TUV Approval. For The European Community. Citroen DS3 1.6 THP 16v. 155bhp DSport & DS3 Racing 207bhp. MSCN123 – Front Silencer Assembly. MSCN124 – Axle Pipe. MSCN125 – Rear Silencer Assembly. MSVW370 x 2 – Trim Assembly Twin 80mm GT80. Pipe Diameter Size O. 2.50 (63.50mm). The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. Life Time Guarantee For The First Purchaser. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether you’re unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. UK MAINLAND & MOST AREAS OF SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. There is an Additional Courier Charge. To Send Items To These Areas Listed Below. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Other Exhaust & Emission Parts”. The seller is “roadrunnermotorsport” and is located in this country: GB. This item can be shipped worldwide.

  • Country/Region of Manufacture: United Kingdom
  • Manufacturer: Citroen
  • Subtype: Cat Back System – Resonated Quieter EC/TUV
  • Type: Exhaust
  • Part Manufacturer: Milltek
  • Manufacturer Part Number: SSXCN101
  • Model/ Series: DS3 1.6 THP 16v DSport 155bhp & DS3 Racing 207bhp
  • Part Manufacturer Number: SSXCN101
  • Intended Use: Modification/ Enhancement
  • Other Part Number: SSXCN101
  • Brand: Milltek

  
  
  

  Tags: citroen, dsport, ectuv, exhaust, milltek, racing, stainless, system

• 25Nov

  VW Scirocco R Milltek 3 Race Turbo Back Non Res Exhaust Sport Cat Chrome GT100

  scirocco Comments Off
  
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Scirocco R Milltek 3 Race Turbo Back Non Res Exhaust Sport Cat Chrome GT100. VW Scirocco MK3 R Milltek Sport 3? Race Turbo Back Non Resonated Exhaust Sport Cat Polished GT100. Genuine Brand New Milltek 3 Race Non Resonated Turbo Back Exhaust System inc Cast Large Bore Downpipe, High Flow Sports Cat and a SuperPro Engine Mount Bush Insert. Milltek Sport Cast Large Bore Downpipe & High Flow Sports Cat. Twin 100mm GT100 Polished Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Sports Cat Is Road Legal + So Will Still Pass An MOT. Louder – this is a non resonated system, Louder than resonated, if you want the quieter resonated system see other listing. Milltek’s Latest Development Now Included – Cast Large Bore Downpipe With 200 cell Race Catalyst. All new downpipes will feature fully CAD designed and optimised casting that is made from 304 stainless steel. The new range will also benefit from improved flow rates due to the superior design as well as better thermal management properties over the traditional downpipe designs previously offered. In-addition all downpipes will now feature “OEM” style soft flexi sections to improve durability and reduce the transfer of unwanted noise, harshness or vibration into the cabin. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXVW152 Turbo Back System. SPF2861-80 or SPF3365-80: SuperPro Lower Engine Mount Insert. MSVAG03: Cast Large Bore Downpipe with 200cell Race Catalyst (Replaces MSAU342SPR). MSVW351: Front Connecting Pipe. MSVW353REP: Non Resonated Rear Silencer Assembly. MSVW354 x2: GT100 Polished Tips. Fits: VW Scirocco R MK3 2009 and later. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000s more Genuine OEM and Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW152
  • Material: Stainless Steel
  • Classic Part: No
  • Country/Region of Manufacture: United Kingdom
  • Performance Part: Yes
  • Universal Fitment: No
  • Mounting Style: Clamp-On
  • Type: Turbo Back inc High Flow Sports Cat

  
  
  

  Tags: back, chrome, exhaust, gt100, milltek, race, scirocco, sport, turbo

• 25Nov

  VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips

  golf Comments Off
  
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Non Res Black Tips. VW Golf MK5 GTI 2.0T Edition 30 Milltek Sport 3 Race Cat Back Exhaust Non Resonated Black Tips. Genuine Brand New Milltek 3 Race Non Resonated Cat Back Exhaust System. Milltek Sport Race Non Resonated Cat Back Exhaust System. Twin 80mm GT80 Cerakote Black Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – this is a non resonated system, louder than resonated, if you want the quieter resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXVW282 Cat Back System. MSVW367: Adaptor to standard OEM downpipe. MSVW352REP: Non-resonated Centre Section. MSVW430: Race Rear Silencer. MSTIP158 x2: Cerakote Black Tips. Pipe Diameter: 3.00-inch (76.20mm). Fits: VW Golf Mk5 GTi 2.0T FSI, GTi Edition 30 2.0T FSi 230PS. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 100’s more Genuine VW & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW282
  • Material: Stainless Steel
  • Classic Part: No
  • Country/Region of Manufacture: United Kingdom
  • Performance Part: Yes
  • Universal Fitment: No
  • Mounting Style: Clamp-On
  • Type: Cat Back Exhaust System

  
  
  

  Tags: back, black, edition, exhaust, golf, milltek, race, tips

• 24Nov

  Honda Integra Dc5 Js Racing Cat Back Exhaust 60rs

  honda Comments Off
  
  
  
  
  
  Collection from south Birmingham. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust Pipes & Tips”. The seller is “urfan5660″ and is located in this country: GB. This item can be shipped to United Kingdom.

  • Brand: CAT

  
  
  

  Tags: 60rs, back, exhaust, honda, integra, racing

• 24Nov

  Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22

  milltek Comments Off
  
  
  
  Milltek GPF Back Race Non-Resonated Exhaust System For Audi RS3 8Y Sportback 22- Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware. Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance. Rear Silencers / Axle back systems are designed to directly replace ther OE rear silencer with a freer flowing option, improving sound and aesthetics of the system. Milltek exhausts offers a significant increase in performance and torque due to reduction of back pressure and flow optimization. Less weight and the well-known Milltek sound are additional features, which puts Milltek sport exhausts aside from the rest. MSAU764REP: Centre Silencer Replacement Pipe (80mm Version). MSAU827: Race Rear Silencer. MSAU822: LH Inner Outlet Pipe. MSAU823: RH Inner Outlet Pipe. MSAU824: LH Valved Outlet Pipe. MSAU825: RH Valved Outlet Pipe. Available As Resonated (Quietest), Non-Resonated (Louder), Race (Loudest) – This listing is for the race varient (loudest system). Performance increase, low back pressure. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Perfect shape and fitment. Pipe Diameter is 3.15-inch (80.00mm). Audi RS3 8Y Sportback / Hatchback 2022. OPF/GPF equipped cars only. If there will be any delays in your order you will be informed within 24-48 hours. Distributed By Haz Motorsport. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “haz_motorsport” and is located in this country: GB. This item can be shipped worldwide.

  • Country/Region of Manufacture: United Kingdom
  • Pipe Diameter: 3.15-inch (80.00mm)
  • Product Type: GPF Back Exhaust
  • Manufacturer Part Number: SSXAU975
  • Vehicle Make: Audi
  • Vehicle Model: RS3 8Y 2022- Hatback / Sportback Only
  • Reference OE/OEM Number: SSXAU975, Milltek, Audi RS3 8Y Hatchback / Sportback, Race System
  • Brand: Milltek

  
  
  

  Tags: audi, back, exhaust, milltek, non-resonated, race, sportback, system

• 23Nov

  VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Black Tips Res

  golf Comments Off
  
  
  
  Car Gaming Racing Simulators. Milltek Sport Exhaust Clamps. Milltek Sport Exhaust Cleaning Polish. Jetex Custom Exhaust Parts. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. VW Golf MK5 GTI 2.0T Edition 30 Milltek Race Cat Back Exhaust Black Tips Res. VW Golf MK5 GTI 2.0T Edition 30 Milltek Sport 3 Race Cat Back Exhaust Black Tips Resonated. Genuine Brand New Milltek Sport 3 Race Resonated Cat Back Exhaust System. Milltek Sport Resonated Cat Back Exhaust System. Twin 80mm GT80 Black Cerakote Tail Pipes. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Quieter – this is a resonated system, quieter than non resonated, if you want the louder non resonated system see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Included Parts in SSXVW280 Cat Back System. MSVW367: Adaptor to standard OEM downpipe. MSVW352: Resonated Centre Silencer Assembly. MSVW430: Race Rear Silencer. MSTIP158 x2: GT80 Cerakote Black Tips. Pipe Diameter: 3.00-inch (76.20mm). We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Check out the shop for 1000’s more Genuine OEM & Performance Parts. We care that items arrive safely, our aim is quality over quantity without excessive material waste. Items are sent via tracked services. May exc some smaller items, see estimated time of arrival. Message first as we can often help. Genuine OEM Volkswagen Parts, NOS and Rare Parts plus 1000s of Aftermarket & Performance Parts. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – UK, US and International government regulations prohibit such practise. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Exhaust System Kits”. The seller is “vw-parts-international” and is located in this country: GB. This item can be shipped worldwide.

  • Brand: Milltek
  • Features: 100% Accuracy of Fit
  • Manufacturer Part Number: SSXVW280
  • Material: Stainless Steel
  • Classic Part: No
  • Country/Region of Manufacture: United Kingdom
  • Performance Part: Yes
  • Universal Fitment: No
  • Mounting Style: Clamp-On
  • Type: Cat Back Exhaust System

  
  
  

  Tags: back, black, edition, exhaust, golf, milltek, race, tips

« Previous Entries