WP_Cloudy

Section

Archive

September 2021
M T W T F S S
« Aug    
 12345
6789101112
13141516171819
20212223242526
27282930  
  • tsudo Comments Off
    Tsudo-V2-Blue-tip-76mm-Single-exit-Race-Cat-back-for-EvoX-08-15-Evo10-01-zhs Tsudo V2 Blue-tip 76mm Single exit Race Cat back for EvoX 08-15 Evo10
    Tsudo V2 Blue-tip 76mm Single exit Race Cat back for EvoX 08-15 Evo10

    Tsudo V2 Blue-tip 76mm Single exit Race Cat back for EvoX 08-15 Evo10
    Tsudo 08-12 Mitsubishi Evo X 3in Single Exit Catback Titanium Burnt Tip Exhaust – YouTube. Video will open in a new window. Fits Evolution model ONLY! Turbo 3 N1 Catback. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Product Type : SE Single Exit Ti-Tip Catback. Single exit cat-back titanium tip exhaust system. Large diameter 76mm piping eliminates backpressure to decrease turbo spool time and increase power across all RPMs. Features 76mm / 3.00in diameter piping with 115mm / 4.5in diameter exhaust Blue tips. Dual mufflers keep the exhaust note mellow and deep even without a catalytic converter for maximum performance without excessive noise. Perforated core straight-through muffler design for smooth, unrestricted performance. Piping polished to a mirror-like finish. Utilizes the factory exhaust hangars. Produces a deep, aggressive exhaust note. Tuned piping diameter maximizes power gains. Improves horsepower, torque, throttle response, and fuel mileage. Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance. CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow. CNC cut flanges and fully TIG welded construction. Significant weight reduction compared to OEM exhaust system. Includes all necessary hardware (bolts and gaskets) for installation. Bolt-on installation with typical hand tools. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Tsudo V2 Blue-tip 76mm Single exit Race Cat back for EvoX 08-15 Evo10″ is in sale since Friday, March 27, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped worldwide.
    • Diameter: 3in
    • Country/Region of Manufacture: Taiwan
    • Interchange Part Number: Lancer Evo X 08-12 Catback exhaust
    • Material: Stainless
    • Type: Cat Back
    • Surface Finish: Stainless steal
    • Manufacturer Part Number: 20-9601-A
    • Placement on Vehicle: Rear
    • Fitment Guide!: 562-888-0188
    • Part Brand: Tsudo
    • Brand: Tsudo
    • Warranty: 90 Day
    • Exit Type: Single

    Tsudo V2 Blue-tip 76mm Single exit Race Cat back for EvoX 08-15 Evo10

    Tags: , , , , , , , , ,

  • tsudo Comments Off
    Tsudo-Performance-2-75-Racing-cat-back-exhaust-Ford-Fiesta-ST-13-14-15-16-Turbo-01-xib Tsudo Performance 2.75 Racing cat back exhaust Ford Fiesta ST 13 14 15 16 Turbo
    Tsudo Performance 2.75 Racing cat back exhaust Ford Fiesta ST 13 14 15 16 Turbo

    Tsudo Performance 2.75 Racing cat back exhaust Ford Fiesta ST 13 14 15 16 Turbo
    Tsudo 2013 + Ford Fiesta ST 1.6 Turbo Single Exit S2 Cat Back Exhaust – YouTube. Video will open in a new window. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Only fits Fiesta 1.6 Turbo ST. Race Single exit cat-back exhaust system. Large diameter 70mm piping eliminates back pressure to decrease turbo spool time and increase power across all RPMs. Perforated core straight-through muffler design for smooth, unrestricted performance. Produces a deep, aggressive exhaust note. Improves horsepower, torque, throttle response, and fuel mileage. Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance. Mandrel-bent stainless steel tubing for maximum exhaust flow. CNC cut flanges and fully TIG welded construction. Includes all necessary hardware (bolts and gaskets) for installation. Bolt-on installation with typical hand tools and utilizes the factory exhaust hangars. Off road Use only. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Tsudo Performance 2.75 Racing cat back exhaust Ford Fiesta ST 13 14 15 16 Turbo” is in sale since Friday, July 24, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in Santa Fe Springs, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
    • Surface Finish: Stainless
    • Manufacturer Part Number: 9215
    • Country/Region of Manufacture: Taiwan
    • Diameter: 2.75in.
    • Placement on Vehicle: Rear
    • OE Spec or Performance/Custom: Performance/Custom
    • Material: Stainless Steel
    • Brand: Tsudo perfromance
    • Fitment Type: Performance/Custom
    • Type: Cat Back
    • Warranty: 90 Day
    • Exit Type: Single

    Tsudo Performance 2.75 Racing cat back exhaust Ford Fiesta ST 13 14 15 16 Turbo

    Tags: , , , , , , ,

  • tsudo Comments Off
    Tsudo-Performance-Racing-S2-Cat-Back-exhaust-for-Scion-tC-11-12-13-14-15-16-17-01-yd Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17

    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo 2011 Scion TC S2 Catback Exhaust System – YouTube. Video will open in a new window. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Manufactured from 100% stainless steel with silver polished finish. T-304 stainless steel will never rust and provides the ultimate durability. CNC machine mandrel-bent 2.5 stainless steel tubing for maximum exhaust flow. CNC cut flanges and robotic TIG welded. Muffler features 2.5″ inlet with 4″ slanted exhaust tip. Inner canister consists of steel wool and white fiberglass which provides lasting lifetime performance and consistent sound. 25% lighter than stock OEM exhaust system. Utilizes the factory exhaust hangars. Includes all necessary flanges, bolts, and gaskets for installation. Easy bolt-on installation with typical hand tools, no welding or cutting required. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17″ is in sale since Thursday, November 5, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped worldwide.
    • Modified Item: Yes
    • Diameter: 2.5in.
    • Tip Shape: Round Angle Cut
    • Type: Cat Back
    • Brand: Tsudo Performance
    • Tip Wall Type: Single Wall Tip
    • Warranty: 90 Day
    • Mounting Hardware Included: Yes
    • Exit Type: Single
    • Country/Region of Manufacture: Taiwan
    • Material: Stainless Steel
    • Surface Finish: Polished
    • Manufacturer Part Number: 20-9377
    • Placement on Vehicle: Rear
    • Part Brand: Tsudo
    • Application: Scion TC 2011 2012 11 12 bolt-on cat back exhaust
    • Fitment Guide!: 562-888-0188
    • Fitment Type: Performance/Custom

    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17

    Tags: , , , , ,

  • tsudo Comments Off
    Tsudo-Performance-Racing-S2-Cat-Back-exhaust-for-Scion-tC-11-12-13-14-15-16-17-01-tgxe Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17

    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo 2011 Scion TC S2 Catback Exhaust System – YouTube. Video will open in a new window. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Manufactured from 100% stainless steel with silver polished finish. T-304 stainless steel will never rust and provides the ultimate durability. CNC machine mandrel-bent 2.5 stainless steel tubing for maximum exhaust flow. CNC cut flanges and robotic TIG welded. Muffler features 2.5″ inlet with 4″ slanted exhaust tip. Inner canister consists of steel wool and white fiberglass which provides lasting lifetime performance and consistent sound. 25% lighter than stock OEM exhaust system. Utilizes the factory exhaust hangars. Includes all necessary flanges, bolts, and gaskets for installation. Easy bolt-on installation with typical hand tools, no welding or cutting required. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17″ is in sale since Monday, September 21, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped worldwide.
    • Modified Item: Yes
    • Diameter: 2.5in.
    • Tip Shape: Round Angle Cut
    • Type: Cat Back
    • Brand: Tsudo Performance
    • Tip Wall Type: Single Wall Tip
    • Warranty: 90 Day
    • Mounting Hardware Included: Yes
    • Exit Type: Single
    • Country/Region of Manufacture: Taiwan
    • Material: Stainless Steel
    • Surface Finish: Polished
    • Manufacturer Part Number: 20-9377
    • Placement on Vehicle: Rear
    • Part Brand: Tsudo
    • Application: Scion TC 2011 2012 11 12 bolt-on cat back exhaust
    • Fitment Guide!: 562-888-0188
    • Fitment Type: Performance/Custom

    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17

    Tags: , , , , ,

  • tsudo Comments Off
    Tsudo-2-75-Race-Cat-back-Exhaust-for-Civic-Si-2006-2007-2008-2009-2010-2011-k20-01-plff Tsudo 2.75 Race Cat back Exhaust for Civic Si 2006 2007 2008 2009 2010 2011 k20
    Tsudo 2.75 Race Cat back Exhaust for Civic Si 2006 2007 2008 2009 2010 2011 k20
    Tsudo 2.75 Race Cat back Exhaust for Civic Si 2006 2007 2008 2009 2010 2011 k20

    Tsudo 2.75 Race Cat back Exhaust for Civic Si 2006 2007 2008 2009 2010 2011 k20
    Tsudo Exhaust 2008 Honda Civic Si Sedan(FA5) – YouTube. Does NOT fit 2dr Coupe or DX/LX/EX! Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. 70mm tubing tuned to bring out the full potential of the Civic Si K20 engine. Manufactured from 100% stainless steel with silver polished finish. T-304 stainless steel will never rust and provides the ultimate durability. CNC machine mandrel-bent 70mm stainless steel tubing for maximum exhaust flow. CNC cut flanges and robotic TIG welded. Muffler features 70mm inlet with 4/102mm angled/slash cut exhaust Burnt tip. Inner canister consists of steel wool and white fiberglass which provides lasting lifetime performance and consistent sound. 25% lighter than stock OEM exhaust system. Utilizes the factory exhaust hangars. Includes all necessary flanges, bolts, and gaskets for installation. Easy bolt-on installation with typical hand tools, no welding or cutting required. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Tsudo 2.75 Race Cat back Exhaust for Civic Si 2006 2007 2008 2009 2010 2011 k20″ is in sale since Friday, July 24, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped worldwide.
    • Tip Shape: Oval Angle Cut
    • Type: Cat Back
    • Brand: Tsudo
    • Warranty: 90 Day
    • Mounting Hardware Included: Yes
    • Exit Type: single
    • Country/Region of Manufacture: Taiwan
    • Material: Stainless Steel
    • Placement on Vehicle: Rear
    • Part Brand: Tsudo
    • Surface Finish: Polished
    • Manufacturer Part Number: 20-9364-A
    • Fitment Type: Direct Replacement
    • Non-Domestic Product: No

    Tsudo 2.75 Race Cat back Exhaust for Civic Si 2006 2007 2008 2009 2010 2011 k20

    Tags: , , , ,

  • tsudo Comments Off
    Tsudo-Performance-Racing-S2-Cat-Back-exhaust-for-Scion-tC-11-12-13-14-15-16-17-01-nksb Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17

    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17
    Tsudo 2011 Scion TC S2 Catback Exhaust System – YouTube. Video will open in a new window. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Manufactured from 100% stainless steel with silver polished finish. T-304 stainless steel will never rust and provides the ultimate durability. CNC machine mandrel-bent 2.5 stainless steel tubing for maximum exhaust flow. CNC cut flanges and robotic TIG welded. Muffler features 2.5″ inlet with 4″ slanted exhaust tip. Inner canister consists of steel wool and white fiberglass which provides lasting lifetime performance and consistent sound. 25% lighter than stock OEM exhaust system. Utilizes the factory exhaust hangars. Includes all necessary flanges, bolts, and gaskets for installation. Easy bolt-on installation with typical hand tools, no welding or cutting required. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17″ is in sale since Monday, November 4, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped worldwide.
    • Modified Item: Yes
    • Diameter: 2.5in.
    • Tip Shape: Round Angle Cut
    • Type: Cat Back
    • Brand: Tsudo Performance
    • Tip Wall Type: Single Wall Tip
    • Warranty: 90 Day
    • Mounting Hardware Included: Yes
    • Exit Type: Single
    • Country/Region of Manufacture: Taiwan
    • Material: Stainless Steel
    • Placement on Vehicle: Rear
    • Part Brand: Tsudo
    • Application: Scion TC 2011 2012 11 12 bolt-on cat back exhaust
    • Fitment Guide!: 562-888-0188
    • Surface Finish: Polished
    • Manufacturer Part Number: 20-9377
    • Fitment Type: Performance/Custom

    Tsudo Performance Racing S2 Cat Back exhaust for Scion tC 11 12 13 14 15 16 17

    Tags: , , , , ,

  • tsudo Comments Off
    Tsudo-Performance-Sp2-stainless-3-Race-Cat-back-exhaust-for-WRX-08-09-10-Sedan-01-tq Tsudo Performance Sp2 stainless 3 Race Cat back exhaust for WRX 08 09 10 Sedan
    Tsudo Performance Sp2 stainless 3 Race Cat back exhaust for WRX 08 09 10 Sedan
    Tsudo Performance Sp2 stainless 3 Race Cat back exhaust for WRX 08 09 10 Sedan

    Tsudo Performance Sp2 stainless 3 Race Cat back exhaust for WRX 08 09 10 Sedan
    Does NOT fit Hatchback / STI / Non-turbo! Turbo 3 SP2 Catback. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Huge 76mm / 3 tubing eliminates backpressure to decrease turbo spool time and increase power. Dual straight-through mufflers for unrestricted flow after the Y-pipe. Dual mufflers keep the exhaust note mellow and deep even without a catalytic converter for maximum performance without excessive noise. Flex joint reduces stress on turbo and engine. Manufactured from 100% stainless steel with silver polished finish. T-304 stainless steel will never rust and provides the ultimate durability. CNC machine 76mm / 3 stainless steel tubing for maximum exhaust flow. CNC cut flanges and robotic TIG welded. Features 115x110mm (approx 4.5) curled oval exhaust tips. Inner canister consists of steel wool and white fiberglass which provides lasting lifetime performance and consistent sound. 25% lighter than stock OEM exhaust system. Utilizes the factory exhaust hangars. Includes all necessary flanges, bolts, and gaskets for installation. Easy bolt-on installation with typical hand tools, no welding or cutting required. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The free listing tool. The item “Tsudo Performance Sp2 stainless 3 Race Cat back exhaust for WRX 08 09 10 Sedan” is in sale since Wednesday, February 20, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped worldwide.
    • Country/Region of Manufacture: Taiwan
    • Diameter: 3in.
    • Tip Shape: Round Angle Cut
    • Material: Stainless Steel
    • Placement on Vehicle: Rear
    • Fitment Guide!: 562-888-0188
    • Surface Finish: polish
    • Manufacturer Part Number: 20-6350
    • Brand: Tsudo
    • Fitment Type: Performance/Custom
    • Tip Wall Type: Double Wall Tip
    • Warranty: 1 Year
    • Mounting Hardware Included: Yes
    • Exit Type: Dual

    Tsudo Performance Sp2 stainless 3 Race Cat back exhaust for WRX 08 09 10 Sedan

    Tags: , , , , , ,