WP_Cloudy

Section

Archive

  • milltek Comments Off
    Milltek-BMW-M2-Competition-Exhaust-Cat-Back-System-RACE-GPF-Delete-Black-Tips-01-nh Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips
    Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips
    Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips
    Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips
    Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips
    Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips

    Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips
    BRAND NEW MILLTEK STAINLESS STEEL CAT BACK SYSTEM RACE WITH GPF DELETE TO FIT BMW M2 COMPETITION 2018 ON. Specialising in Performance Exhaust Systems. Milltek Sport Authorised Dealer. A Milltek Stainless Steel Cat Back Exhaust System. RACE VERSION – Louder. Includes A GPF Delete Pipe. (Includes An Appropriate Fitting Kit). RACE Exhaust – LOUDER. By Removing The OE GPF The engine Management Light Will Be Activated. Requires GPF Delete Software. Recommended For Motorsport / Track Use. BMW 2 Series M2 Competition Coupe (F87). MSBM304REP – GPF/OPF Bypass Section – Requires GPF Delete Software. LH Valve Outlet Pipe. RH Valve Outlet Pipe. Cerakote Black Trims 90mm GT90. Cerakote Black GT90 Trims. Pipe Diameter Size O. 2.76-inch (70.00mm). The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. Life Time Guarantee For The First Purchaser. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether youre unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek are the exhaust specialists! Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW4-KW3, KW5-KW17, PA20-PA38, PA40-PA49. PA60-PA78, PA87 – PA88 PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. The item “Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips” is in sale since Thursday, February 13, 2020. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in Nottingham. This item can be shipped worldwide.
    • TAILPIPE: 4 x 90mm – Cerakote Black GT90 Trims
    • FITTING KIT: Yes – Includes An Appropriate Fitting Kit
    • MILLTEK AUTHORISED DEALER: YES
    • SYSTEM TYPE: RACE VERSION – Louder Inc GPF Delete Pipe
    • EC APPROVED: NO
    • Brand: Milltek
    • Country/Region of Manufacture: United Kingdom
    • Type: Exhaust System
    • IMPORTANT NOTE: Removes OE GPF – Replaces with Delete Pipe
    • Part Manufacturer: Milltek
    • Part Manufacturer Number: SSXBM1087 & SSXBM1091
    • IMPORTANT NOTE 2: Removing The OE GPF Will Increase Noise
    • IMPORTANT NOTE 3: A Stage 2 ECU Remap is Required
    • IMPORTANT NOTE 4: By Removing OE GPF – Engine Light Will Come On
    • Intended Use: Modification/ Enhancement
    • Model/ Series: BMW 2 Series M2 Competition Coupé (F87) 2018 on
    • Subtype: Milltek Exhaust Stainless Steel Cat Back System
    • Manufacturer Part Number: SSXBM1087 & SSXBM1091
    • Reference OE/OEM Number: Exhaust
    • IMPORTANT NOTE 5: Recommended For Motorsport / Track Use
    • PIPE DIAMETER SIZE OD: 2.76-inch (70.00mm)

    Milltek BMW M2 Competition Exhaust Cat Back System RACE & GPF Delete Black Tips

    Tags: , , , , , , , ,

  • cobra Comments Off
    Cobra-Sport-2-5-Inch-Downpipe-Sports-Catalyst-Section-With-Race-Pipe-SE30-01-lise Cobra Sport 2.5 Inch Downpipe & Sports Catalyst Section With Race Pipe SE30
    Cobra Sport 2.5 Inch Downpipe & Sports Catalyst Section With Race Pipe SE30

    Cobra Sport 2.5 Inch Downpipe & Sports Catalyst Section With Race Pipe SE30
    Cobra Sport 2.5 Inch Downpipe & Sports Catalyst Section With Race Pipe – SE30. Cobra Sport Downpipes are built with performance in mind. They are built to the highest quality and have undergone extensive testing and development so that they not only look great, but improve sound and performance. All of Cobra Sports range of exhausts and components are fully guaranteed to give you peace of mind. Please note, this image is for illustration purposes only, actual product may differ to item shown. Our clearance stock is populated via an automated system so stock takes 24 hours to update. WHEN WILL MY ORDER BE DISPATCHED? Orders placed and paid for before 3.30pm will be dispatched same day (Monday to Friday only). HOW LONG WILL IT TAKE TO RECEIVE MY ITEM? CAN I CHANGE MY ADDRESS ONCE I’VE PLACED MY ORDER? Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside mainland UK. We fulfil your order quickly and efficiently from stock, however, please be aware that as all the items in our Outlet Store are clearance items, some packaging may show signs of soiling and/or not be in perfect condition but the reduced pricing reflects this. Also, in very rare cases, some items may not be able to be located in our warehouse, but you will be advised of this as soon as possible after ordering. Express and guaranteed services will need to be selected and paid for at time of ordering. Pay with a credit/debit card or cash and collect in person from our HQ in Wrexham, North Wales (ask for details before coming in). Finance options also available subject to status (minimum spend required), call for details. Need to talk to someone? Department contact information below. Our full address is: Demon Tweeks 75 Ash Road South, Wrexham Industrial Estate, Wrexham, North Wales. OS map ref; SJ381500. Opening Times: Monday Saturday: 8.30am 5.30pm Sunday: CLOSED BANK HOLIDAYS: CLOSED. Also, during periods of high demand, there may be additional delays in us responding. Demon Tweeks, 75, Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 0UG, United Kingdom. GB 840 2501 70. The item “Cobra Sport 2.5 Inch Downpipe & Sports Catalyst Section With Race Pipe SE30″ is in sale since Thursday, October 11, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exhausts & Exhaust Parts\Other Exhaust Parts”. The seller is “demontweeksoutlet” and is located in Wrexham. This item can be shipped worldwide.
    • Manufacturer: Cobra Sport
    • Brand: Cobra Sport
    • MPN: SE30
    • EAN: Does not apply
    • Manufacturer Part Number: SE30

    Cobra Sport 2.5 Inch Downpipe & Sports Catalyst Section With Race Pipe SE30

    Tags: , , , , , , , , ,

  • stainless Comments Off
    Stainless-Dual-2-5-Header-Back-Exhaust-55-57-Chevy-Cars-V8-W-Flowmaster-Muffler-01-sfxq Stainless Dual 2.5 Header Back Exhaust 55-57 Chevy Cars V8 W Flowmaster Muffler
    Stainless Dual 2.5 Header Back Exhaust 55-57 Chevy Cars V8 W Flowmaster Muffler
    Stainless Dual 2.5 Header Back Exhaust 55-57 Chevy Cars V8 W Flowmaster Muffler

    Stainless Dual 2.5 Header Back Exhaust 55-57 Chevy Cars V8 W Flowmaster Muffler
    Our Products Are Top Quality SS409 Stainless Steel Other Competitors Are Using Low Quality Aluminized Steel This Listing Includes Our Pipe Kit With Authentic Flowmaster Mufflers. This listing is for a brand new. High Performance SS409 Stainless Steel Dual Header Back Exhaust System. The system is made. Specifically for vehicle models listed below. You’re going to love the deep, rich and throaty sound from our performance exhaust system. It has been expertly engineered to provide an aggressive muscular exterior sound while minimizing interior resonance. The result is a perfectly tuned exhaust note. Does Not Fit Convertible Or Wagon Models. Aggressive Exterior Sound Level & Moderate Interior Sound. Tube Diameter: 2.50 Pipes. Improve Sound, Horsepower & Torque. TIG Weld & Mandrel-Bent For Maximum Performance. Bolts, Hangers & Exhaust Clamps Included As Shown. Intended For Professional Installation. Please verify the part received before installation. We are not liable for direct, indirect, incidental, consequential damages, loss of use or any other expenses. Customer fully understands and agrees to accept all responsibilities associated with the use of this product. The item “Stainless Dual 2.5 Header Back Exhaust 55-57 Chevy Cars V8 W Flowmaster Muffler” is in sale since Thursday, October 1, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “worldwideperformance” and is located in Houston, Texas. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.
    • Brand: Dual Performance Racing
    • Manufacturer Part Number: Dual Pickup Truck
    • Type: Cat Back
    • Surface Finish: Stainless Steel
    • Warranty: 1 Year
    • Interchange Part Number: Flowmaster Summit Racing
    • Other Part Number: Magnaflow MBRP AFE Heartthrob
    • UPC: 750221041725

    Stainless Dual 2.5 Header Back Exhaust 55-57 Chevy Cars V8 W Flowmaster Muffler

    Tags: , , , , , , , , ,

  • diamond Comments Off
    Diamond-Eye-For-93-01-Chevy-Diesel-6-5L-Single-4-Turb0-Back-Exhaust-with-5-Tip-01-lrj Diamond Eye For 93-01 Chevy Diesel 6.5L Single 4 Turb0 Back Exhaust with 5 Tip

    Diamond Eye For 93-01 Chevy Diesel 6.5L Single 4 Turb0 Back Exhaust with 5 Tip
    CELL PHONES & TABLETS & PARTS. GALAXY TABLET SCREENS & PARTS. IPAD SCREENS & PARTS. IPHONE SCREENS & PARTS. SAMSUNG SCREENS & PARTS. COILS, MODULES & PICK-UPS. CYLINDER HEADS & PARTS. FASTENERS & STUD KITS. Diamond Eye For 93-01 Chevy Diesel 6.5L Single 4″ Turbo Back Exhaust w/ 5″ Tip. BRAND NEW IN BOX. Not CARB Legal Not for sale or street use in CA & CARB states. OFF-ROAD / RACE USE ONLY. DIAMOND EYE – 4? ALUMINIZED PERFORMANCE DIESEL EXHAUST # K4108A. DIFFERENT TREND – ROLLED SLANT BOLT-ON EXHAUST TIP # BQ9-405012RSL. 1- Part Number : Diamond Eye – K4108A. Brand : Diamond Eye Performance. Part Type : Exhaust Systems. Exit Location : Passenger side. Catalytic Converter(s) Included : No. Intermediate Pipe Diameter (in) : 4.000 in. Muffler Configuration : Single inlet/Single outlet. Tailpipe Diameter (in) : 4.000 in. Notes : 3.000 in. Diamond Eye Performance exhaust systems are built just the way you want! Upgrading your exhaust has definite benefits–particularly with Diamond Eye systems, which offer lower EGTs, more horsepower, better sound quality, and more passes by the pump. CNC mandrel-bending machines and support equipment allow their technicians to fabricate non-restrictive, free-flowing systems to benefit your engine. Diamond Eye affords you the choice of standard or muffler replacement kits (RP) in a variety of 3 in. Models, up to bigger and better 5.0 in. Systems, in either economical 16-gauge aluminized steel or longer-lasting, good looking 409 stainless steel. These kits are also designed to reduce your installation time; hangers, clamps, and hardware are included to complete your job. For a great fit and finish, bolt on a Diamond Eye Performance exhaust system. 2- Part Number : Different Trend – BQ9-405012RSL. Bolt On 5″ x 12″ Rolled Slant. 4.00 Inlet Diameter. 5.00 Outlet Diameter. 12 Over All Length. My Garage brings the fastest service to the racing enthusiasts by providing whatever you need for your project from the sources of all around the world for Imports, Europeans and American vehicles with most competitive prices. We provide best quality products along with fair price and great customer service. Thank you for shopping with us! Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. We always look to satisfy our customers in whatever needs they may have. Please be aware that under no circumstances S&K International Trading LLC “My Garage” will be held responsible for any labor or repair or any other costs incurred from the parts found to be faulty, defective or incorrect or any other costs arising from parts supplied. A replacement will not be dispatched until we receive the faulty or damaged parts back. We use generic images on listings. Actual product may vary. It is your responsibility to make sure you are purchasing the correct item. If you receive your order and find something is missing or damaged, please contact with us within 24 hours of receiving your order. Add to Favorite Sellers. Sign up to Newsletter. View more great items. Diamond Eye For 04 – 07 Dodge 5.9L Diesel Turbo Downpipe 4” Stainless – 262050. Diamond Eye For 94-97 Ford F250 F350 7.3L Single 5″ Cat-Back Exhaust w/ 6″ Tip. Diamond Eye For 94-01 Chevy Diesel 6.5L w/ 5″ Tip Single 4″ Turb0 Back Exhaust. Diamond Eye For 01-07 Chevy GMC 6.6L Single 4″ Down Pipe-Back Exhaust w/ 5″ Tip. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Diamond Eye For 93-01 Chevy Diesel 6.5L Single 4 Turb0 Back Exhaust with 5 Tip” is in sale since Thursday, July 23, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “mygarageautoparts” and is located in San Diego, California. This item can be shipped worldwide.
    • Modified Item: No
    • Diameter: 4in.
    • Custom Bundle: Yes
    • Interchange Part Number: Off-Road/Race Use Only
    • California Prop 65 Warning: Cancer & Reproductive Harm- www.P65Warnings.ca.gov
    • Type: Turbo Back
    • Surface Finish: Aluminized
    • Manufacturer Part Number: K4108A / BQ9-405012RSL
    • Other Part Number: K4108A / BQ9405012RSL
    • Brand: Diamond Eye / Different Trend
    • Restricted States: California
    • Fitment Type: Performance/Custom
    • Non-Domestic Product: No
    • Tip Wall Type: Single Wall Tip
    • Mounting Hardware Included: Yes
    • Bundle Description: Diamond Eye 4 ALUMINIZED PERFORMANCE DIESEL EXHAUST # K4108A & DIFFERENT TREND Bolt On 5″ x 12″ Rolled Slant TIP # BQ9-405012RSL
    • Exit Type: Single

    Diamond Eye For 93-01 Chevy Diesel 6.5L Single 4 Turb0 Back Exhaust with 5 Tip

    Tags: , , , , , , ,

  • chevrolet Comments Off
    Chevrolet-Cobalt-2005-2006-2007-Tsudo-Performance-SS-2-0-Race-Cat-back-Exhaust-01-vy Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust

    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    2005 cobalt ss/sc tsudo exhaust – YouTube. 2.0L ECOTEC engine. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Features 63.5mm / 2.50in diameter piping with a 115mm / 4.5in diameter exhaust tip. Perforated core straight-through muffler design for smooth, unrestricted performance. Muffler and piping polished to a mirror-like finish. Includes removable exhaust tip silencer. Utilizes the factory exhaust hangars. Produces a deep, aggressive exhaust note. Tuned piping diameter maximizes power gains. Improves horsepower, torque, throttle response, and fuel mileage. Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance. CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow. CNC cut flanges and fully TIG welded construction. Significant weight reduction compared to OEM exhaust system. Includes all necessary hardware (bolts and gaskets) for installation. Bolt-on installation with typical hand tools. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust” is in sale since Monday, September 21, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines.
    • Part Brand: Tsudo
    • Cobalt 05 06 07 catback: Cobalt SS catback exhaust
    • Application: 05 06 07 2005 2006 2007 Cobalt with 2.0L ECOTEC
    • Brand: Tsudo Performance
    • Mounting Hardware Included: Yes
    • Exit Type: Single
    • Country/Region of Manufacture: Taiwan
    • Fitment Guide!: 562-888-0188
    • Placement on Vehicle: Rear
    • Surface Finish: Polished
    • Manufacturer Part Number: 20-9371
    • Fitment Type: Performance/Custom

    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust

    Tags: , , , , , ,

  • sb03y Comments Off
    SB03y-Cobra-sport-Subaru-Impreza-Turbo-01-07-Cat-Back-Race-type-Non-res-01-vni SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res
    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res
    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res
    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res
    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res
    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res
    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res
    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res

    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res
    Fits 2.0L & 2.5L Turbo. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Subaru Impreza performance exhaust is made in 2.5/63.5mm pipework and fit from the catalytic converter. Section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. Is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore. Has a sportier exhaust note. Please Note – Fitted images show non-resonated exhaust. All relevant fittings and gaskets are supplied. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. UK MANUFACTURED All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. Note: ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. NOTE: This product comes with the above options, please leave us a message at checkout to notify us your choices. Gx Autosport is one of Uks largest performance car parts specialists. We specialises in Performance exhausts, intercooler kits, silicone hose kits, suspension kits and much more! Our products are all carefully sourced from around the globe. We pride ourselves in providing a high quality service to our customers. Our company has been built on great reputations and will always be. However, in some cases, it may take longer due to back logs. Please note that some products are subject to 4-5 weeks lead time. One of our team will be more than happy to assist. If you have found this item cheaper elsewhere. Please do not hesitate to get in touch with us, in most cases, we are able to beat the price for you! The item “SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res” is in sale since Friday, December 9, 2016. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “gx_auto” and is located in Sheffield. This item can be shipped worldwide.
    • Manufacturer Part Number: SB03y
    • Country/Region of Manufacture: United Kingdom
    • Brand: Cobra Sport

    SB03y Cobra sport Subaru Impreza Turbo 01-07 Cat Back Race type Non res

    Tags: , , , , , , , , ,

  • invidia Comments Off
    INVIDIA-N1-RACING-CAT-BACK-EXHAUST-for-SUBARU-WRX-STI-2014-01-fw INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+
    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+
    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+
    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+
    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+
    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+
    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+
    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+

    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+
    For SUBARU WRX STI. In very good condition. Was on car for approx. Due to the heavy weight and. I n which case. If you do want it posted, the. Cheapest I can find to include full. The item “INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+” is in sale since Sunday, October 11, 2020. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “dids989″ and is located in Highcliffe, Dorset. This item can’t be shipped, the buyer must pick up the item.
    • Brand: Invidia

    INVIDIA N1 RACING CAT BACK EXHAUST for SUBARU WRX STI 2014+

    Tags: , , , ,

  • dual Comments Off
    Dual-Header-Back-Exhaust-68-70-Mopar-Dodge-Plymouth-B-Body-With-Flowmaster-Muffler-01-uth Dual Header Back Exhaust 68-70 Mopar/Dodge/Plymouth B Body With Flowmaster Muffler
    Dual Header Back Exhaust 68-70 Mopar/Dodge/Plymouth B Body With Flowmaster Muffler
    Dual Header Back Exhaust 68-70 Mopar/Dodge/Plymouth B Body With Flowmaster Muffler

    Dual Header Back Exhaust 68-70 Mopar/Dodge/Plymouth B Body With Flowmaster Muffler
    This Listing Includes Our Pipe Kit With Authentic Flowmaster Mufflers. This listing is for a brand new. Dual 3 Header-Back Exhaust System. The system is made. Specifically for vehicle models listed below. You’re going to love the deep, rich and throaty sound from our performance exhaust system. It has been expertly engineered to provide an aggressive muscular exterior sound while minimizing interior resonance. The result is a perfectly tuned exhaust note. Aggressive Exterior & Interior Sound Level. Tube Diameter: 3 Inlet & Outlet. Two Flowmaster Mufflers Included. Improve Sound, Horsepower & Torque. TIG Weld & Mandrel-Bent For Maximum Performance. Bolts, Hangers & Exhaust Clamps Included As Shown. Top Quality Products & Affordable Pricing. Intended For Professional Installation. Please verify the part received before installation. We are not liable for direct, indirect, incidental, consequential damages, loss of use or any other expenses. Customer fully understands and agrees to accept all responsibilities associated with the use of this product. The item “Dual Header Back Exhaust 68-70 Mopar/Dodge/Plymouth B Body With Flowmaster Muffler” is in sale since Thursday, October 1, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “worldwideperformance” and is located in Houston, Texas. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.
    • Brand: Dual Performance Racing
    • Manufacturer Part Number: Dodge Chrysler Exhaust
    • Type: Header Back
    • Material: Aluminized Steel
    • Surface Finish: Aluminized Steel
    • Warranty: 1 Year
    • Interchange Part Number: Flowmaster Summit Racing
    • Other Part Number: Magnaflow MBRP AFE Heartthrob
    • UPC: 750221041770

    Dual Header Back Exhaust 68-70 Mopar/Dodge/Plymouth B Body With Flowmaster Muffler

    Tags: , , , , , , , ,

  • downpipe Comments Off
    5-Downpipe-Back-5-RACE-EXHAUST-Ford-Powerstroke-6-7-11-20-compare-flopro-01-gyun 5 Downpipe Back 5 RACE EXHAUST Ford Powerstroke 6.7 11-20 compare flopro

    5 Downpipe Back 5 RACE EXHAUST Ford Powerstroke 6.7 11-20 compare flopro
    Compare to FLOPRO 653NB or similar from Jamo or MBRP / P1. This unbranded exhaust features a 5″ Downpipe-Back Exhaust setup, made from heavy duty 5″ STAINLESS Steel. STAINLESS STEEL – No aluminized steel here. Does NOT fit RC; Automatic Only. No Bungs & No Muffler. The item “5 Downpipe Back 5 RACE EXHAUST Ford Powerstroke 6.7 11-20 compare flopro” is in sale since Thursday, October 22, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “09152012seller” and is located in Pocatello, Idaho. This item can be shipped worldwide.
    • Manufacturer Part Number: 653NB
    • MPN: 521007
    • Style: Does not apply
    • Brand: Custom

    5 Downpipe Back 5 RACE EXHAUST Ford Powerstroke 6.7 11-20 compare flopro

    Tags: , , , , , , , ,

  • skunk2 Comments Off
    Skunk2-Racing-413-05-2000-MegaPower-Cat-Back-Exhaust-System-Fits-93-00-Civic-01-dk Skunk2 Racing 413-05-2000 MegaPower Cat Back Exhaust System Fits 93-00 Civic
    Skunk2 Racing 413-05-2000 MegaPower Cat Back Exhaust System Fits 93-00 Civic

    Skunk2 Racing 413-05-2000 MegaPower Cat Back Exhaust System Fits 93-00 Civic
    Skunk2 Racing 413-05-2000 MegaPower Cat Back Exhaust System Fits 93-00 Civic. MegaPower Cat Back Exhaust System. MegaPower Cat Back Exhaust System; 2.25 in. Polished Tip; Bolt On/No Modification Req. Exit Position: Single Rear. Inlet Inside Diameter: 2.250 in. Main Piping Diameter: 2.250 in. Material: T-304 Stainless Steel. Pipe Material: 304 Stainless. System Type: Cat Back. Tip Diameter: 4.000 in. Tubing Diameter: 2.250 in. Bolt-On System; No Welding Or Fabrication Necessary. A properly designed exhaust system is critical to engine performance. Skunk2’s 60mm MegaPower Exhaust system for the 93-95 Civic EX and DX and 96-00 Civic EX and Si coupe and sedan was developed with this in mind and is based off of more than 15 years’ worth of racing experience. Dyno-proven for maximum horsepower, MegaPower cat-back systems are constructed of T-304 stainless steel, are robotically TIG welded, and feature CNC mandrel bends for a precise fit. Featuring Japanese-spec, Super N1 styling, MegaPower Exhaust systems generate more horsepower by optimizing engine airflow and volume through carefully selected, application-specific tubing lengths and diameters and increased wave scavenging effects for more horsepower. CNC mandrel bending allows for a constant tubing diameter throughout the bend, which results in precise fitment as well as improved exhaust gas flow. Each system is fitted with a resonator, includes stainless steel flanges, and is finished off with a straight-through, low-restriction racing muffler for uninterrupted flow. Each fully polished muffler is mated to a 110mm polished tip with its own acid-etched MegaPower badge and serialized nameplate. A Skunk2 removable silencer and all necessary hardware are also included. Skunk2’s MegaPower Exhaust lineup is based off of the same systems we custom build for our road racing and time attack vehicles. MegaPower Exhaust systems offer more performance, better build-quality, and the ultimate sound when compared to comparably priced systems. All Skunk2 products are carefully planned and designed in-house using the latest computer simulation and modeling techniques, followed by careful testing in controlled laboratory environments using state-of-the-art equipment. Each product is then subjected to rigorous dyno, street, and race track testing to ensure proper performance in the most extreme conditions. For these reasons, top street cars and race cars worldwide rely on Skunk2 products. For this reason, we usually cannot cancel an order once it’s placed. Compatibility chart and application-specific wording in this listing are based specifically for USA market vehicles. Fitment is not guaranteed on international vehicles, as many manufacturers use region-specific options. Please do not add notes to your order. Our systems are automated, and the notes are not read. New items must be in original packaging(including plastic wrapped items), uninstalled, and in factory new condition. We only sell factory new parts, no exceptions. Stuff happens, but when it does, we’ll take care of you. Join our mailing list! The item “Skunk2 Racing 413-05-2000 MegaPower Cat Back Exhaust System Fits 93-00 Civic” is in sale since Tuesday, October 6, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “21-motorsports” and is located in Locations all over the USA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
    • Brand: Skunk2 Racing
    • Manufacturer Part Number: 413-05-2000
    • Material: T-304 Stainless Steel
    • Fitment Type: Performance/Custom
    • Interchange Part Number: BJWR413-05-2000
    • Other Part Number: BJWR413-05-2000
    • Country of Origin: TW
    • Merchandising Name: MegaPower Cat Back Exhaust System
    • NAFTA Criteria Code: D
    • Truck Freight Indicator: No
    • Exhaust Type: Cat-Back
    • Exit Position: Single Rear
    • Inlet Inside Diameter (in.): 2.25
    • System Type: Cat Back
    • Tip Size: 4.0 in.
    • Main Piping Diameter (in.): 2.25
    • Tip Finish: Polished
    • Width (in.): 18.000
    • Pipe Material: 304 Stainless
    • Model: MegaPower Cat Back Exhaust System
    • Length (in.): 12.000
    • Tubing Diameter: 2.250 in.
    • Length: 12.000
    • Width: 18.000
    • Weight: 62.46

    Skunk2 Racing 413-05-2000 MegaPower Cat Back Exhaust System Fits 93-00 Civic

    Tags: , , , , , , , , ,

« Previous Entries