WP_Cloudy

Archive

  • beluga Comments Off
    Beluga-Racing-Performance-Axle-Back-Exhaust-for-Infiniti-G35-G37-Sedan-07-14-01-lxww Beluga Racing Performance Axle Back Exhaust for Infiniti G35 G37 Sedan 07-14
    Beluga Racing Performance Axle Back Exhaust for Infiniti G35 G37 Sedan 07-14
    Beluga Racing Performance Axle Back Exhaust for Infiniti G35 G37 Sedan 07-14
    Beluga Racing Performance Axle Back Exhaust for Infiniti G35 G37 Sedan 07-14

    Beluga Racing Performance Axle Back Exhaust for Infiniti G35 G37 Sedan 07-14
    Brand New Beluga Racing T-304 Stainless Steel Performance Exhaust System with Dual 102mm 4 Tips with Canisters for Aggressive Deep Tone without Drone in Cabin. 2.5 ” with 4″ Bevel Edge Tips. All Mandrel Bend Pipes with TIG Welding. Company’s terms and conditions. All sales are FINAL. Items we sell may not be street-legal in your state/country. All items are for off-road/track use only. Professional installation is highly recommended. Modifications may be required with some items. Items must be in new condition, not used or installed. The item “Beluga Racing Performance Axle Back Exhaust for Infiniti G35 G37 Sedan 07-14″ is in sale since Tuesday, July 28, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “beluga-racing” and is located in Garland, Texas. This item can be shipped worldwide.
    • Country/Region of Manufacture: Taiwan
    • Diameter: 2.5in.
    • Tip Shape: Round Angle Cut
    • Material: T304 Stainless
    • Type: Axle Back
    • Surface Finish: T-304 Stainless
    • Manufacturer Part Number: EX-G37-S
    • Restricted States: California
    • Brand: BELUGA RACING
    • Warranty: Yes
    • Exit Type: Dual

    Beluga Racing Performance Axle Back Exhaust for Infiniti G35 G37 Sedan 07-14

    Tags: , , , , , , , ,

  • racing Comments Off
    HKS-Racing-Cat-Back-Exhaust-with-Titanium-Tips-For-JDM-02-07-WRX-STI-31008-BF004-01-acy HKS Racing Cat Back Exhaust with Titanium Tips For JDM 02-07 WRX & STI 31008-BF004

    HKS Racing Cat Back Exhaust with Titanium Tips For JDM 02-07 WRX & STI 31008-BF004
    HKS Racing Cat Back Exhaust w/ Titanium Tips For JDM 02-07 WRX & STI 31008-BF004. MODIFICATION REQUIRED TO FIT USDM DOWN PIPE&#######xA0. Get that flagship flat 4 rumble with the HKS Racing Muffler. This muffler has been designed with minimal bends that help reduce exhaust turbulence under acceleration which promotes more horsepower, more torque, reduced turbo lag, and a better throttle response. The larger piping diameter combined with the racing style muffler produces an aggressive tone under boost, as well as under idle. Exhaust hangers are welded onto the OEM locations so that this exhaust system becomes a direct fitment without the need for any further modifications. Gaskets, as well as hardware, will also be included to make this racing muffler ready for installation. See our other items. The item “HKS Racing Cat Back Exhaust with Titanium Tips For JDM 02-07 WRX & STI 31008-BF004″ is in sale since Tuesday, June 23, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “built_not_bought_automotive” and is located in Chesapeake, Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
    • Part Brand: HKS
    • Country/Region of Manufacture: Japan
    • Interchange Part Number: titanium tips
    • Type: Cat Back
    • Surface Finish: Titanium
    • Manufacturer Part Number: 31008-BF004
    • Other Part Number: EJ205 / EJ255 / EJ257 / Turbo
    • Brand: HKS Racing
    • Fitment Type: Performance/Custom
    • Warranty: Unspecified Length

    HKS Racing Cat Back Exhaust with Titanium Tips For JDM 02-07 WRX & STI 31008-BF004

    Incoming search terms:

    • 2013 dodge dart 2 0L OBX catback exhaust

    Tags: , , , , , ,

  • saab Comments Off
    SAAB-9-5-Abbott-Racing-3-Exhaust-System-Down-Pipe-Cat-Back-not-Maptun-JT-Nordic-01-iwao SAAB 9-5 Abbott Racing 3 Exhaust System Down Pipe+Cat Back not Maptun JT Nordic
    SAAB 9-5 Abbott Racing 3 Exhaust System Down Pipe+Cat Back not Maptun JT Nordic
    SAAB 9-5 Abbott Racing 3 Exhaust System Down Pipe+Cat Back not Maptun JT Nordic

    SAAB 9-5 Abbott Racing 3 Exhaust System Down Pipe+Cat Back not Maptun JT Nordic
    SAAB 9-5 Abbott Racing Motorsport 3 Exhaust System Down Pipe+Cat Back. In very good used condition. Removed from 2002 SAAB 9-5. Minor scrape to the front flexi joint. Please see the photos. Collection from Huddersfield, HD5 preferred due to size and weight. Please let me know if you want to arrange your own courier. I will pack the system for free. Item is advertised elsewhere. The item “SAAB 9-5 Abbott Racing 3 Exhaust System Down Pipe+Cat Back not Maptun JT Nordic” is in sale since Tuesday, July 28, 2020. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Performance Front/Down Pipes”. The seller is “30f400″ and is located in Huddersfield. This item can be shipped to United Kingdom.
    • Brand: Saab

    SAAB 9-5 Abbott Racing 3 Exhaust System Down Pipe+Cat Back not Maptun JT Nordic

    Tags: , , , , , , , ,

  • audi Comments Off
    Audi-TT-180-225-Quattro-Milltek-3-Race-Non-Res-Cat-Back-Exhaust-Polished-Tips-01-enot Audi TT 180 225 Quattro Milltek 3 Race Non Res Cat Back Exhaust Polished Tips
    Audi TT 180 225 Quattro Milltek 3 Race Non Res Cat Back Exhaust Polished Tips

    Audi TT 180 225 Quattro Milltek 3 Race Non Res Cat Back Exhaust Polished Tips
    Audi TT 180 225 Quattro Milltek Sport 3 Race Non Resonated Cat Back Exhaust System Polished GT100 Tips. Genuine Brand New Milltek Sport Cat Back Exhaust System. Milltek Sport Non Resonated Cat Back Exhaust System. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Fits 225 Model Only. Weight Saving: -7.15 kilos. Louder – (this is a non resonated system, louder than resonated, if you want the quieter resonated system please see other listing). Milltek Sport exhausts are made from high-quality type 304 aircraft-grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of silencers. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in SSXAU429 System. MSAU609REP: Centre Silencer Replacement Pipe. MSAU610: Rear Silencer Assembly. MSVW373 x2: Polished Tips. Pipe Diameter: 3.00 inch (76.20mm) 1.00 to 1.50 hour(s) to fit. +0.2 for valance fitting on required models {including removing OE system} Tip Style: Dual GT100. Please note pictures are for illustration purposes only. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Genuine OEM & Performance Parts. Update from the team at VW Parts Int. Helping you to stay mobile. Priority support for key/essential workers, show ID for priority dispatch/assistance. We are working to very strict measures to maintain service and ensure staff and customer safety. Please be safe when working on your car, follow workshop manuals carefully. Vehicles still need to be maintained and kept roadworthy but please work safely and consider impact of works on others. UK, if outside UK check restrictions locally. All postal and courier networks are doing their utmost best to deliver, though there are some delays and to be expected. Global networks are open, with some delays while social distancing is in place. Some manufacturers have temporarily limited or stopped production, though many are stocked so should a part not be available we will message at once. Please have patience and understanding during these times as we try to help you maintain your vehicle. Thanks to everyone keeping networks moving and our key workers saving lives and helping others. Bare in mind as lockdown is lifted, networks will be busier and delays as likely. Message us if you have any questions. Car Gaming Racing Simulators. Cold Air Induction Kits. Electrical & Engine Parts. Anti Roll Bar Kits. 10mm HT Ignition Leads. All other Non VW Parts. Audi TT 180 225 Quattro Milltek 3′ Race Non Res Cat Back Exhaust Polished Tips. RC + Scale Models. Golf MK3 Engine Raisers. For 1000s more of the best available parts. The item “Audi TT 180 225 Quattro Milltek 3 Race Non Res Cat Back Exhaust Polished Tips” is in sale since Sunday, October 20, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “vw-parts-international” and is located in UK. This item can be shipped worldwide.
    • Manufacturer Part Number: SSXAU429
    • Brand: Milltek Sport

    Audi TT 180 225 Quattro Milltek 3 Race Non Res Cat Back Exhaust Polished Tips

    Tags: , , , , , , ,

  • turner Comments Off
    Turner-F13-M6-F06-M6-Gran-Coupe-Race-Inspired-Axle-Back-Exhaust-01-dmam Turner F13 M6, F06 M6 Gran Coupe Race Inspired Axle-Back Exhaust
    Turner F13 M6, F06 M6 Gran Coupe Race Inspired Axle-Back Exhaust

    Turner F13 M6, F06 M6 Gran Coupe Race Inspired Axle-Back Exhaust
    NEW (opened box from Turner Motor Sports) Turner F13 M6 and F06 M6 Gran. Coupe Race Inspired Axle. AngleCut / Polished Stainless Tips / No Logo On Tips (TENF1347A4P). The following is from Tunermotorsport. Com. Our Race Inspired exhaust deletes the rear mufflers in the F13 M6 and F06 M6 Gran Coupe to allow more of the exhaust soundt o be heard. We love our M6 but it’s just too quiet so we looked at ways to get more of the stock exhaust to be heard. After evaluating the stock exhaust layout it was easy to see that removing the rear mufflers would accomplish what we wanted. But cutting the mufflers off is just the beginning. We then had to develop a set of pipes and design a set of tips that fit perfectly and also looked right at home on the Coupe and Gran Coupe. Our Race Inspired Exhaust is the finished product. Our axle-back exhaust is made from a 304 stainless steel tube in the same diameter as the stock exhaust and with mandrel bends for unimpeded flow. It fits with the stock hangers and is clamped to the stock exhaust pipes once the factory mufflers are cut off. The entire installation can be done in about an hour with the exhaust on the car. With factory BMW clamps, available from us as well, you can easily re-install your stock mufflers at any time. Our tips are also stainless in a perfectly proportioned 102mm (4.0 diameter). They fill out the rear bumper valence perfectly – not too small like stock and not boy-racer large. Tips area vailable in polished silver or satin black. We have designed our tips to fit both the standard coupe and Gran Coupe bumpers. The final result is that removing the stock mufflers really lets the M6 V8 sing! With the mufflers and flapper valves removed the sound on start-up is scintillating. The sound from the S63TU engine is robust and intoxicating – it just needs to be heard! From outside, the muffler-delete exhaust makes the car seem all the more impressive. From the burble at idle to the roar under full throttle there is little doubt that this is a proper M car. Inside the car during normal driving the sound is not changed much thanks to the Active Sound Design system. It’s a little louder but not intrusive or irritating. Around town the car sounds much like stock but just a touch louder and deeper. The exhaust pops and burbles more with each downshift, especially in Sport Plus Mode. On the highway at 70-80 cruising speeds it sounds similar to the stock exhaust. As far as “drone”goes– we only experienced a slight drone at very low speeds in a high geari. Lugging the engine which we normally wouldn’t do. We sell resonators that bolt in place, knocking the volume down by approximately 50%. Our Race Inspired M6 exhaust is perfect for enhancing and accentuating the stock sound. It lets more of the M6’s soundtrack come through without extensive exhaust modifications. If you want to enjoy the M6’s sound more, think of this as its volume knob turned up. This item fits the following BMWs: 2012+ F12 F13 BMW M6 Coupe, M6 Convertible 2012+ F06 BMW M6 Gran Coupe. This Part Fits the Following BMWs. The item “Turner F13 M6, F06 M6 Gran Coupe Race Inspired Axle-Back Exhaust” is in sale since Monday, April 27, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “rodneroa_0″ and is located in North Las Vegas, Nevada. This item can be shipped worldwide.
    • Diameter: 4in.
    • Manufacturer Part Number: TENF1347A4P
    • Tip Shape: Round Angle Cut
    • Brand: Turner
    • Fitment Type: Direct Replacement
    • Surface Finish: Polished
    • Type: Axle Back
    • Connection Type: Clamp-on
    • Material: Stainless Steel
    • Mounting Hardware Included: Yes
    • Exit Type: Dual

    Turner F13 M6, F06 M6 Gran Coupe Race Inspired Axle-Back Exhaust

    Tags: , , , , , ,

  • mustang Comments Off
    2005-2009-Mustang-Gt-Gt500-Ford-Performance-Bullitt-Axle-Back-Exhaust-Sound-Clip-U0026-Install-01-gu

    Tags: , , , , , , , , , , ,

  • series Comments Off
    BMW-1-Series-M140i-Milltek-Non-Res-Race-GPF-Back-Exhaust-Cerakote-Black-GT-90-01-ut BMW 1 Series M140i Milltek Non Res Race GPF Back Exhaust Cerakote Black GT 90

    BMW 1 Series M140i Milltek Non Res Race GPF Back Exhaust Cerakote Black GT 90
    BMW 1 Series M140i Milltek Sport Performance Non Resonated Race GPF Back Exhaust Cerakote Black GT 90 Trims. Genuine Brand New Milltek Sport Non Resonated Race GPF Back Exhaust System. Milltek Sport Non Resonated Race GPF Back Exhaust System. Cerakote Black GT 90 Trims. High Quality 304 Aircraft Grade Stainless Steel. Improved Performance + Throttle Response. Louder – This is a non resonated system, louder than resonated. If you want the quieter resonated system please see other listing. By fitting Milltek exhaust components you can rest assured that these are very high quality, high-performance parts that will in most cases outlive the car. You will notice large gains in performance and throttle response. Milltek Sport exhausts are made from high-quality type 304 aircraft grade stainless steel that is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. Included Parts in System SSXBM1107. MSBM306REP: Non Resonated Centre Section. MSBM246: Rear Silencer Assembly (Valved). MSBM277: Outlet Pipe (Non-Valved). MSBM278: Outlet Pipe (Valved). MSBM279: LH Mounting Bracket. MSBM280: RH Mounting Bracket. MSTIP532 x2: Cerakote Black Tip Assembly. Pipe Diameter: 2.62? (66.50mm) Tip Style: Twin 90mm GT90. Fits: BMW 1 Series M140i 3 & 5 Door (F20 & F21 LCI – OPF Models only) 2019 and later. Pictures for illustration purposes. You will receive items listed above. We recommend all exhaust parts are fitted by a qualified mechanic to ensure the correct fitment. Please see our shop for 1000s more Performance and Genuine OEM Parts. Car Racing Gaming Seats. FK AK Street Coilovers. BMW 1 Series M140i Milltek Non Res Race GPF Back Exhaust Cerakote Black GT 90. Air Lift Performance #LifeOnAir. HIGH Performance Ignition Leads. Gaming Racing Office Seats. Genuine Ford OEM Parts. Made with in Great Britain. Template Managed & Developed by Dev VIP. 30-06-2019 16:06:19. The item “BMW 1 Series M140i Milltek Non Res Race GPF Back Exhaust Cerakote Black GT 90″ is in sale since Sunday, May 12, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “part-werx” and is located in UK. This item can be shipped worldwide.
    • Brand: Milltek Sport
    • Manufacturer Part Number: SSXBM1107

    BMW 1 Series M140i Milltek Non Res Race GPF Back Exhaust Cerakote Black GT 90

    Tags: , , , , , , ,

  • installing Comments Off
    991-Gt3-Installing-Chris-Smith-Racing-Exhaust-01-ft

    Tags: , , , ,

  • ford Comments Off
    Ford-Racing-Performance-Active-Sport-Cat-Back-Exhaust-For-16-17-Ford-Focus-Rs-01-pxbk Ford Racing Performance Active Sport Cat Back Exhaust For 16-17 Ford Focus Rs

    Ford Racing Performance Active Sport Cat Back Exhaust For 16-17 Ford Focus Rs
    Ford Performance crafts their cat-back exhaust system from premium quality 304 stainless steel. It retains the RS’s stock active exhaust control with a 2-1/2 NPP valve and will add an aggressive exhaust note. This exhaust kit is tuned and engineered to give a performance upgrade in order to improve the driving experience. The 3 exhaust pipe features smooth mandrel bends and warp-free flanges. The stylish dual rear exit exhaust sports chrome-plated 4 tips with embossed Ford logos. Uniquely designed and tuned to provide optimum performance, aggressive sound, durability and pure driving excitement. Retains the factory active exhaust control with a 2.5 NPP valve. Manufactured in the USA from high-quality 304 stainless steel. Features 3 exhaust pipe with ultra-smooth mandrel bends, warp-free flanges and superior craftsmanship. Dual rear exit with 4 chrome plated stainless steel exhaust tips with embossed Ford logo. The item “FORD RACING PERFORMANCE ACTIVE SPORT CAT BACK EXHAUST FOR 16-17 FORD FOCUS RS” is in sale since Tuesday, June 23, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “f4l_autoparts” and is located in Madison Heights, Michigan. This item can be shipped worldwide.
    • Manufacturer Part Number: M-5200-FRS
    • Brand: FORD RACING

    Ford Racing Performance Active Sport Cat Back Exhaust For 16-17 Ford Focus Rs

    Tags: , , , , , , , ,

  • beluga Comments Off
    Beluga-Racing-Performance-Axle-Back-Exhaust-for-Infiniti-G37x-Q60-3-7L-Coupes-01-ohe Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes
    Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes
    Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes
    Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes
    Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes
    Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes

    Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes
    Brand New Beluga Racing T-304 Stainless Steel High Performance Light Weight Axle Back Exhaust System with Beveled Tips and HIgh Quality TIG Welding. All Tubes are Inspected & Ported on Each Cylinder to Ensured Smooth Even Flow. Fits: Infiniti G37x Coupes & Q60 3.7L. Comes With Brand New Bolts + Gaskets. All Mandrel Bend Pipes with TIG Welding. 2.5″ Inlet with 4.5″ Tips. Company’s terms and conditions. All sales are FINAL. Items we sell may not be street-legal in your state/country. All items are for off-road/track use only. Professional installation is highly recommended. Modifications may be required with some items. Items must be in new condition, not used or installed. The item “Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes” is in sale since Friday, March 13, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “beluga-racing” and is located in Garland, Texas. This item can be shipped worldwide.
    • Country/Region of Manufacture: Taiwan
    • Surface Finish: T304 Stainless
    • Manufacturer Part Number: EX-Q60-AXLEBACK
    • Brand: Beluga Racing
    • Warranty: Yes

    Beluga Racing Performance Axle Back Exhaust for Infiniti G37x & Q60 3.7L Coupes

    Tags: , , , , , , , ,

« Previous Entries