• milltek Comments Off
    Milltek-Sport-Fiesta-ST180-Cat-Back-Exhaust-NONE-resonated-Race-Version-01-ad Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)
    Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)
    Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)
    Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)
    Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)
    Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)
    Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)

    Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)
    Milltek Sport Fiesta ST 180 Cat Back Exhaust (Non Resonated Race Version) – Milltek Sport Exhaust. Essential for Maximum Performance. Class Quality and Guarantee of the Milltek Sport Brand. Huge Increase in bore size to 70mm. Release the Flow from the new Mk7 Fiesta ST 180 Ecoboost engine with a Milltek Sport Non resonated Race Version Sports Exhaust System. A New Release from Milltek Sport : The ST180 Mk7 Ford Fiesta Ecoboost gains a fantastic 70mm Stainless steel performance exhaust system. With a beautiful engine note the new Ford Turbo 1.6 Ecoboost engine is brought to life with this piece of artwork again crafted by the masters at Milltek Sport. So what is the difference between the two non resonated Milltek Systems? The cost of the non resonated vs the Race non resonated is exactly the same. Its all about the internal design of the full flow 70mm pipework. The Race Version has less silencing than the normal non resonated. The standard non resonated noise level is all taken care of by some very special full bore trickery within the single rear silencer box. Its not about restricting flow, its about reflecting sound waves internally to create a perfectly tuned rear silencer. Coloured tips to choose from. Polisted miltek stainless tips…. Have you been #Enhanced? Due to holiday season we will be closed from 20 the December until the new year and all orders will be delayed until 4th of January 2019, we are sorry for any inconveniences caused and we wish everybody a merry Christmas and a happy new year. The item “Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)” is in sale since Thursday, October 18, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exhausts & Exhaust Parts\Complete Exhaust Systems”. The seller is “carenhancements” and is located in Bradford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Saudi arabia, United arab emirates, Chile, Bangladesh, Bolivia, Brunei darussalam, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Cambodia, Liechtenstein, Macao, Monaco, Martinique, Nicaragua, Pakistan, Peru, Paraguay, Bahrain, Bahamas, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam.
    • Manufacturer Part Number: Does Not Apply
    • Modified Item: No
    • Custom Bundle: No
    • Brand: Milltek
    • Non-Domestic Product: No
    • Exhaust System Type: Cat Back

    Milltek Sport Fiesta ST180 Cat Back Exhaust NONE resonated (Race Version)

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-SSXVW307-Golf-R-MK7-Cat-Back-Exhaust-3-Race-System-Non-Resonated-Polish-01-mjs Milltek SSXVW307 Golf R MK7 Cat Back Exhaust 3 Race System Non Resonated Polish
    Milltek SSXVW307 Golf R MK7 Cat Back Exhaust 3 Race System Non Resonated Polish
    Milltek SSXVW307 Golf R MK7 Cat Back Exhaust 3 Race System Non Resonated Polish

    Milltek SSXVW307 Golf R MK7 Cat Back Exhaust 3 Race System Non Resonated Polish
    BRAND NEW MILLTEK STAINLESS STEEL 3 CAT BACK SYSTEM NON RES NON VALVED TO FIT GOLF MK7 R 2.0 TSI 300PS 2014 ON. BRAND NEW MILLTEK STAINLESS STEEL 3CAT BACK SYSTEM NON RES NON VALVED TO FIT GOLF MK7 R 2.0 TSI 300PS 2014 ON. Golf MK7 R 2.0 TSI 300PS 2014 on. 3 Non Valved Race System – Non Resonated – LOUDER Polish Tips. Milltek Sport Launches Race Exhaust System for the Mk7 VW Golf R. Milltek Sport have released a new Race system option for general sale. While based on their existing system, Millteks engineers have removed the two Active Exhaust Valves from the silencer outlet pipes to save weight and cost and revised the internal design of the rear silencer to produce a consistent sound throughout the entire rev-range. The external rear silencer body is unchanged and still features the same compact design of the regular Milltek system which reduces the size of the silencer considerably over the OE system making it virtually invisible behind the rear bumper. The system is based around 3-inch (76mm) stainless steel pipe diameter. Millteks Technicians used advanced gas-flow analysis and extensive road/dyno testing to show this bore size offered the optimal blend of increased power with a perfectly judged rich sound quality. As with the regular road system, the Race system is available with either a centre silencer (referred to as Resonated) or a centre silencer delete pipe (Non-Resonated) allowing you to customise the sound level inside the car. For customers looking to get the best possible performance from their R, Milltek Sport has also developed a range of larger-bore downpipe options which, when combined with the cat-back system, makes a full turbo-back system. Depending on local emissions laws, customers can choose from an ultra-high-performance 200 cell hi-flow sports catalyst or a catalyst removal pipe. Built with racing in mind, the new Race option has been subjected to extensive track testing on their own VW Golf R at the 2014 Hockenheim Tuner GP and done many thousands of miles both on and off the race track. A Milltek Stainless Steel. 3 Race Exhaust System Non Valved. Includes Non-Res Pipe, Rear Silencer Non Valved, Polished Oval Tips & Appropriate Fitting Kit. VW Golf MK7 R. 2.0 TSi 300PS. MSAU618REP (Centre Non-Res Pipe). MSVW441 (Rear Silencer Non-Valved). MSTIP159 x 4 (Polished Oval Tips). 3.00-inch (76.20mm). 4 x Polished Oval Trims. The UK’S No1 Largest Stockist! For A Fast, Efficient & Reliable Service. At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether youre unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek are the exhaust specialists! Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49. PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. The item “Milltek SSXVW307 Golf R MK7 Cat Back Exhaust 3 Race System Non Resonated Polish” is in sale since Wednesday, October 4, 2017. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in Nottingham. This item can be shipped worldwide.
    • Part Manufacturer: Milltek
    • Part Manufacturer Number: SSXVW307
    • Manufacturer: Volkswagen
    • Make: Milltek
    • Intended Use: Modification/ Enhancement
    • Country/Region of Manufacture: United Kingdom
    • Model/ Series: Golf MK7 R 2.0 TSi 300PS 2014 on
    • Subtype: 3″ Cat Back System Non-Res – Polished Tips
    • Manufacturer Part Number: SSXVW307
    • Other Part Number: SSXVW307
    • Brand: Milltek
    • Type: Exhaust

    Milltek SSXVW307 Golf R MK7 Cat Back Exhaust 3 Race System Non Resonated Polish

    Tags: , , , , , , , ,