• mbrp Comments Off
    Mbrp-3-Cat-Back-Exhaust-Kit-Fits-2015-2019-Mustang-2-3l-Ecoboost-Race-Version-01-mnqo Mbrp 3 Cat Back Exhaust Kit Fits 2015-2019 Mustang 2.3l Ecoboost Race Version
    Mbrp 3 Cat Back Exhaust Kit Fits 2015-2019 Mustang 2.3l Ecoboost Race Version
    Mbrp 3 Cat Back Exhaust Kit Fits 2015-2019 Mustang 2.3l Ecoboost Race Version

    Mbrp 3 Cat Back Exhaust Kit Fits 2015-2019 Mustang 2.3l Ecoboost Race Version
    BRAND NEW AXLE BACK MBRP EXHAUST SYSTEM. ALL KITS ARE COMPLETE WITH ALL CLAMPS TO INSTALL. Fits: 15-19 Ford Mustang 2.3L Ecoboost. Installer Series Cat Back Aluminized Steel System With Mufflers, 3 Inch Pipe Diameter Single Exhaust With Dual Split Rear Exit, Race Version 4-1/2 Inch Stainless Steel Tips. MBRP Part Number S7275AL. Built To Perform: Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better. Dyno Proven: From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Your MBRP Performance System Gets Exhaust Out Fast. Easy Installation: Bolt-On, No Weld Design Makes Installation A No Hassle One. Built from heavy duty aluminized steel our Installer Series performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Your item that you are returning must be brand new and not EVER installed or used. You can not return a used item. Every return will be inspected to make sure it is brand new and complete. Once we give you that number we will provide a return address as well. The item “MBRP 3 CAT BACK EXHAUST KIT FITS 2015-2019 MUSTANG 2.3L ECOBOOST RACE VERSION” is in sale since Monday, April 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “theaftermarketshop” and is located in Pittston, Pennsylvania. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
    • Compare: Banks Magnaflow Ford Mustang Ecoboost Exhaust
    • Country/Region of Manufacture: United States
    • Diameter: 3in.
    • Interchange Part Number: MBRP S7275AL
    • Material: Aluminum
    • Years: 15 16 17 18 19 Mustang Ecoboost Exhaust
    • Years 2: 2015 2016 2017 2018 2019 Mustang Ecoboost Exhaust
    • UPC: 882963107251
    • Muffler: Dual Muffler
    • Inlet/Outlet: Single Inlet Single Outlet
    • Type: Cat Back
    • Surface Finish: Aluminized With Stainless Tip
    • Manufacturer Part Number: S7275AL
    • Other Part Number: 2.3L Ford Mustang Ecoboost MBRP Exhaust System
    • Brand: MBRP
    • Fitment Type: Performance/Custom
    • Warranty: Yes
    • Mounting Hardware Included: Yes
    • Exit Type: Dual

    Mbrp 3 Cat Back Exhaust Kit Fits 2015-2019 Mustang 2.3l Ecoboost Race Version

    Tags: , , , , , , , ,

  • 2006-2010 Comments Off
    2006-2010-Charger-R-T-SE-V8-5-7L-Cat-back-2-5-Exhaust-with-Race-Pro-Mufflers-01-zdf 2006-2010 Charger R/T & SE V8 5.7L Cat-back 2.5 Exhaust with Race Pro Mufflers

    2006-2010 Charger R/T & SE V8 5.7L Cat-back 2.5 Exhaust with Race Pro Mufflers
    Includes all clamps and hardware needed for installation. Increases horsepower by 10-18HP! Race Pro mufflers feature the quietest sound at low RPM compared to Pypes’ Violator & Street Pro mufflers. The higher the RPM, the louder the sound Race Pro mufflers have the quietest interior drone noise. This kit is also available with Violator or Street Pro mufflers. The videos below give you an idea of the sound of this system. Exhausts and engine compartment parts may not be compatible with foreign-built vehicles. Our exhaust & engine parts may likely not work with foreign-built cars, and the customer assumes their own risk in any attempt. Please use the “Ask a Question” link on this page to send us any questions. They will contact Yates Performance and we will replace. All new parts are guaranteed. All sales at Yates Performance are considered final. Also, refused packages can take up to 18 days to be processed. Problems with order: Please inspect merchandise at the time of receipt. Any problems must be reported within 48 hours of receipt. All claims for shortages must be made within 48 hours of receipt also. Elkton VA 22827 Warranties: Any and all warranties listed are Manufacturers warranties and go by their guidelines. Warning : Cancer and Reproductive Harm – w w w. P 6 5 W a r n i n g s. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “2006-2010 Charger R/T & SE V8 5.7L Cat-back 2.5 Exhaust with Race Pro Mufflers” is in sale since Friday, June 12, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “yatesperformance” and is located in Elkton, Virginia. This item can be shipped worldwide.
    • Brand: Pypes Performance Exhaust
    • Manufacturer Part Number: SMC10R
    • Interchange Part Number: RT 5.7 Liter Cat Back Tips Clamps
    • Other Part Number: DG2330R
    • California Prop 65 Warning: Warning: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

    2006-2010 Charger R/T & SE V8 5.7L Cat-back 2.5 Exhaust with Race Pro Mufflers

    Tags: , , , , ,

  • megan Comments Off
    MEGAN-RACING-SUPREMO-AXLE-BACK-EXHAUST-With-ROLLED-TIPS-FOR-12-16-F12-F13-650I-2D-01-enz MEGAN RACING SUPREMO AXLE BACK EXHAUST With ROLLED TIPS FOR 12-16 F12 F13 650I 2D

    MEGAN RACING SUPREMO AXLE BACK EXHAUST With ROLLED TIPS FOR 12-16 F12 F13 650I 2D
    MEGAN RACING SUPREMO AXLE BACK EXHAUST W/ ROLLED TIPS FOR 12-16 F12 F13 650I 2D. MEGAN RACING SUPREMO AXLE BACK EXHAUST W/ ROLLE TIPS FOR 12-16 F12 F13 650I 2D. NOTE: All Megan Racing Exhaust and Suspension products are deemed for “off-road use only”– please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws. BEST QUALITY AND PRICE GUARANTEED! Please Double Check Your Fitment on the Product or Message Us Directly!! Our Feedback Speaks for Itself! Fast Parts Warehouse is committed in providing you excellent customer service and getting you your products in an orderly amount of time. We have all the resources to get you the correct products to you the first time, so please ask us if you have any questions at all to ensure that you’re getting the correct item. Sales will be considered final, unless the error is made on our part. With over 15 years of experience in the aftermarket car parts industry, we continue to bring you, the customers, the best products possible. The item “MEGAN RACING SUPREMO AXLE BACK EXHAUST With ROLLED TIPS FOR 12-16 F12 F13 650I 2D” is in sale since Thursday, May 30, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “fastpartswarehouse” and is located in Pomona, California. This item can be shipped worldwide.
    • Brand: MEGAN RACING
    • Manufacturer Part Number: ABE-BF13V2-SRT-RL + ABE-BF13V2-SRT-RR
    • Interchange Part Number: MR-ABE-BF13V2-SRT-RR+RL

    MEGAN RACING SUPREMO AXLE BACK EXHAUST With ROLLED TIPS FOR 12-16 F12 F13 650I 2D

    Tags: , , , , , , , , ,

  • 18-20 Comments Off
    18-20-Mustang-GT-witho-Active-Exhaust-MBRP-3in-Race-Version-Cat-Back-Exhaust-01-hob 18-20 Mustang GT (witho Active Exhaust) MBRP 3in Race Version Cat-Back Exhaust

    18-20 Mustang GT (witho Active Exhaust) MBRP 3in Race Version Cat-Back Exhaust
    Features 3 aluminized steel tubing and quad 4dual wall tips. This exhaust has an aggressive exhaust tone. Built from heavy duty aluminized steel our Installer Series performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. MBRP’s performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry. Your MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynamometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. MBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box. Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there’s no question that you have the hottest performance exhaust on the road. Thanks for looking, and make sure to check out. For additional Mustang performance parts! Not liable for improper installation. The item “18-20 Mustang GT (witho Active Exhaust) MBRP 3in Race Version Cat-Back Exhaust” is in sale since Wednesday, January 23, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “john_smith_racing” and is located in Oceanside, California. This item can be shipped worldwide.
    • Manufacturer Part Number: S7207AL
    • Brand: MBRP
    • Fitment Type: Performance/Custom

    18-20 Mustang GT (witho Active Exhaust) MBRP 3in Race Version Cat-Back Exhaust

    Tags: , , , , , , , ,

  • megan Comments Off
    Megan-Racing-Oe-rs-Stainless-Cat-Back-Exhaust-For-08-12-Accord-Coupe-V6-01-dnun Megan Racing Oe-rs Stainless Cat Back Exhaust For 08-12 Accord Coupe V6
    Megan Racing Oe-rs Stainless Cat Back Exhaust For 08-12 Accord Coupe V6
    Megan Racing Oe-rs Stainless Cat Back Exhaust For 08-12 Accord Coupe V6

    Megan Racing Oe-rs Stainless Cat Back Exhaust For 08-12 Accord Coupe V6
    MEGAN RACING OE-RS STAINLESS CAT BACK EXHAUST FOR 08-12 ACCORD COUPE V6. Megan Racing OE-RS series cat backs are based on factory style, with bigger piping, OEM style polished mufflers and quiet sound. The cat back system is made stainless steel. All piping are mandrel bent with a high polished finish. Exhaust system comes with all the necessary hardware needed for a direct bolt on installation. Improves HP with minimal noise. Being constructed of T-304 Stainless Steel this durable piece will easily handle the elements and offer you years of performance. SPECIFICATIONS & FEATURES: – 4″ tips with silencers – 2.5″ piping. NOTE: All Megan Racing Exhaust and Suspension products are deemed for “off-road use only”– please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws. BEST QUALITY AND PRICE GUARANTEED! Please Double Check Your Fitment on the Product or Message Us Directly!! Our Feedback Speaks for Itself! Fast Parts Warehouse is committed in providing you excellent customer service and getting you your products in an orderly amount of time. We have all the resources to get you the correct products to you the first time, so please ask us if you have any questions at all to ensure that you’re getting the correct item. Sales will be considered final, unless the error is made on our part. With over 15 years of experience in the aftermarket car parts industry, we continue to bring you, the customers, the best products possible. The item “MEGAN RACING OE-RS STAINLESS CAT BACK EXHAUST FOR 08-12 ACCORD COUPE V6″ is in sale since Wednesday, May 29, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Mufflers”. The seller is “fastpartswarehouse” and is located in Pomona, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
    • Brand: MEGAN RACING
    • Manufacturer Part Number: CBS-HA082DV6-M + MR-CBS-HA082DV6-R

    Megan Racing Oe-rs Stainless Cat Back Exhaust For 08-12 Accord Coupe V6

    Tags: , , , , , , , ,

  • chevrolet Comments Off
    Chevrolet-Cobalt-2005-2006-2007-Tsudo-Performance-SS-2-0-Race-Cat-back-Exhaust-01-wi Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust

    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust
    2005 cobalt ss/sc tsudo exhaust – YouTube. 2.0L ECOTEC engine. Vehicle photos and photos with captions are of the actual item(s). Size and shape may vary in other pictures. The Tsudo Difference – Quality. Features 63.5mm / 2.50in diameter piping with a 115mm / 4.5in diameter exhaust tip. Perforated core straight-through muffler design for smooth, unrestricted performance. Muffler and piping polished to a mirror-like finish. Includes removable exhaust tip silencer. Utilizes the factory exhaust hangars. Produces a deep, aggressive exhaust note. Tuned piping diameter maximizes power gains. Improves horsepower, torque, throttle response, and fuel mileage. Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance. CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow. CNC cut flanges and fully TIG welded construction. Significant weight reduction compared to OEM exhaust system. Includes all necessary hardware (bolts and gaskets) for installation. Bolt-on installation with typical hand tools. FAQ – Frequently Asked Questions. Are your exhausts street and/or smog legal? Do your catbacks have CARB exemption numbers? The vast majority (over 95%) of our exhaust systems are smog legal. Some of our exhaust products are race products designed for racing or off road use only, please check with your local and state laws. Catback exhausts do not require CARB exemption because they are bolted after the catalytic converter and maintain stock exhaust routing and sensors. What is the difference between Tsudo exhausts and other brand “x” exhausts? Tsudo exhausts are all made completely out of T304 stainless steel, the best stainless steel in the industry. Other and “brand name” companies may use aluminized mild steel, painted mild steel, or cheaper stainless steel to save costs. Tsudo exhausts are also all constructed with mandrel bent tubing. All the mufflers and resonators used in the exhaust systems are straight-through design, having good muffling capacity while producing the best performance. Why is T304 stainless steel better than other types of steel (mild, aluminized, T430 steel)? T304 stainless steel has the highest corrosion resistance compared to T430 and other grades of stainless steel. It will never rust and is the strongest steel for use in exhaust systems. Painted mild steel and aluminized steel will eventually rust/corrode and fail over time when the coating of paint/aluminum easily corrodes through Why is mandrel bent tubing better? Mandrel bent tubing has a uniform diameter throughout the bend, a 2.5″ mandrel bend would be 2.5″ all the way through. This keep performance up and exhaust flow high and efficient, maximizing the performance potential of the system. A crush bent pipe is literally crushed into a bend, making the diameter smaller where the bend is made. A typical 2.5″ crush-bent pipe could only be 2″ in diameter or even less! A picture of a crush bent (left) and mandrel bent (right) pipe is shown below. Why can’t I just have any exhaust shop make an exhaust system for me? A mandrel bending machine easily costs in the tens of thousands of dollars, so most exhaust shops can ONLY make crush bends for their piping. This results in piping that won’t perform as well as a mandrel bent system. The typical neighborhood exhaust shop also would not stock high quality stainless steel piping. The low quality aluminized steel that is normally used will rust and corrode from the moisture and heat in the exhaust system and is not as durable as T304 stainless steel. How hard is it to install the exhaust system? Can you install it for me? All of our exhaust systems/components are built for straight forward installation with just hand tools. ALWAYS use jack stands and wheel chocks on level ground. Safety should always be the first priority when working on your car. About Us – Speed-Element Motorsports. Speed-Element Motorsports is commited to providing our customers with the best service at the most competitive prices. ALL SALES ARE FINAL. Please inspect packages upon receipt. The item “Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust” is in sale since Thursday, October 24, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “speedelement” and is located in La Habra, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cayman islands, Sri lanka, Luxembourg, Monaco, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
    • Part Brand: Tsudo
    • Cobalt 05 06 07 catback: Cobalt SS catback exhaust
    • Application: 05 06 07 2005 2006 2007 Cobalt with 2.0L ECOTEC
    • Brand: Tsudo Performance
    • Mounting Hardware Included: Yes
    • Exit Type: Single
    • Country/Region of Manufacture: Taiwan
    • Fitment Guide!: 562-888-0188
    • Placement on Vehicle: Rear
    • Surface Finish: Polished
    • Manufacturer Part Number: 20-9371
    • Fitment Type: Performance/Custom

    Chevrolet Cobalt 2005 2006 2007 Tsudo Performance SS 2.0 Race Cat back Exhaust

    Tags: , , , , , ,

  • stainless Comments Off
    Stainless-Steel-Sport-Race-Cat-Back-Exhaust-System-For-Fiat-500-1-2-8v-07-13-01-vw Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13
    Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13
    Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13
    Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13
    Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13
    Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13
    Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13

    Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13
    HUGE RANGE IN STOCK. 30 DAYS RETURN GUARANTEE. STAINLESS STEEL SPORT RACE CAT BACK EXHAUST SYSTEM FOR FIAT 500 1.2 8V 07-13. Manufactured from high quality T304 grade stainless steel. Mandrel bent and fully TIG welded for strength and durability. Designed to improve power and torque across the entire RPM range. Noticeably improves throttle response. Built in flexi joint to reduce strain on your exhaust. Please note fitting instructions are. Supplied complete as shown. We recommend all exhaust components are fitted by a qualified mechanic to ensure the correct fitment. Northern Ireland & Ireland, AB31 – AB56, IV1 – IV40, IV52 – IV54, IV63, KW1 – KW14 including Orkney Islands, PA21 – PA38, PH4 – PH50, HS1 – HS9, all Western Isles, IV41 – IV51, IV55 & IV56 (SKYE), KA27 & KA28, KW15 – KW17, PA20, PA41 – PA78, ZE including Shetlands, Isles of Scilly, Isle of Man, Guernsey, Jersey, Isle of Wight and BFPO addresses. We dispatch all orders Monday-Friday. Please be aware that with heavy items the courier may require assistance to unload your order. We recommend all our parts be fitted by qualified persons to ensure correct installation and compatibility. We do not however accept any liability for the costs involved in this. We shall not be held liable for labour costs incurred relating to incompatibility or product failure. All labour costs are incurred as part of an agreement between you and your chosen garage and as such, any labour charge disputes should be handled between those parties concerned. We recommend thoroughly checking compatibility of products on receipt before commencing installation. We ask that all returning items are provided in an un-used state in their original packaging. Our friendly and honest advisors will work with you to resolve the issue promptly. Why deal with us? Whether its a daily driven street weapon or purpose built track monster you can rest assured we have exactly what you need. Our comprehensive range of performance parts are engineered to perfection, tested to their limits and in stock ready to go all at unbeatable prices! The price you see is the price you pay! Our expert advisors are all petrol-heads through and through, with over 30 years experience between them. Our dedicated friendly and knowledgeable advisors are here to help so if youve got a question, need a little help or if on the odd occasion things dont quite go to plan; our team will do all they can to put things right! Huge range of products in stock manufactured and tested to the highest quality standards. Unbeatable prices all stock is on the shelf in our UK-based warehouse. The item “STAINLESS STEEL SPORT RACE CAT BACK EXHAUST SYSTEM FOR FIAT 500 1.2 8V 07-13″ is in sale since Wednesday, January 4, 2012. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts”. The seller is “gravity-performance” and is located in Lancashire. This item can be shipped to all countries in Europe.
    • Brand: Gravity
    • Manufacturer Part Number: KIT0564GV
    • Material: T304 Stainless Steel
    • Instructions: Not included
    • Modifications: May be required
    • Bore Size (mm): 43
    • Length (mm): 3010
    • Tailpipe Bore (mm): 52×108
    • Tailpipe Length (mm): 100

    Stainless Steel Sport Race Cat Back Exhaust System For Fiat 500 1.2 8v 07-13

    Tags: , , , , , , , ,

  • 075-12 Comments Off
    07-5-12-Diamond-Eye-Dodge-5DPF-Race-Turbo-Back-Exhaust-NB-No-Muffler-AL-01-so 07.5-12 Diamond Eye Dodge 5DPF Race Turbo Back Exhaust NB No Muffler AL

    07.5-12 Diamond Eye Dodge 5DPF Race Turbo Back Exhaust NB No Muffler AL
    For 2007.5-2011- Dodge 6.7L Cummins Diesel 2500/3500- (all cab and bed lengths) 5Aluminized Steel-Performance Diesel Exhaust System DPF Turbo Back- Single Kit – No bungs- No Muffler. These parts are for “RACE” applications only! These “RACE” applications products are limited to use in governed course racing by a racing organization. Any use, including off-road use, could be in violation of local, state and federal laws. These systems and parts will also requite electronic control modules to work with your vehicle. Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment. Enabling us to produce the finest exhaust components in today’s marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8″ to 5″ OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. Our new state-of-the-art Research & Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this; we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive! When it comes time for you to place your next order or get a system for yourself, please keep Diamond Eye Manufacturing in mind. This off-road race only product (“this Product”) is designed and intend for use in organized, amateur and professional racing events, but is limited to closed-course racing and open-course racing that is formally sanctioned by a recognized racing organization involving the motor vehicle in which it is installed (the “Vehicle”). It is not for use on public highways or roads nor is it for recreational off-road use other than solelyfor competition purposes. Its officers, employees, agents, distributors and dealers for any damages, penalties, fines, expenses or other costs which may arise from the use of this product and without limiting the generality of the forgoing specifically acknowledges the following. Use of this Product for purposes other than solely for competition is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. The User warrants that the product shall only be used in sanctioned closed-circuit events. That use of this Product may make the Vehicle unfit or unsafe for the purposes intended or for any purpose and cause personal injury, property damage or death. That the installation of this Product, improper installation of this Product, use of this Product with other components or failure to use this Product in conjunction with other components, could result in or cause personal injury, property damage or death. THIS PRODUCT IS FOR COMPETITION USE ONLY. ALL OTHER USES ARE CONTRARY TO FEDERAL LAW. The item “07.5-12 Diamond Eye Dodge 5DPF Race Turbo Back Exhaust NB No Muffler AL” is in sale since Sunday, December 29, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “wholesale-tuners_fuel-injection” and is located in Missoula, Montana. This item can be shipped worldwide.
    • Manufacturer Part Number: K5253A-RP now K5238A-RP
    • Interchange Part Number: Performance Exhaust 6.7L Dodge No Bungs
    • Other Part Number: 2500/3500 Dodge Ram Cummins Diesel Truck
    • Placement on Vehicle: Right
    • Surface Finish: Aluminized Steel
    • Warranty: Yes
    • Part Brand: DIAMOND EYE PERFORMANCE 2012

    07.5-12 Diamond Eye Dodge 5DPF Race Turbo Back Exhaust NB No Muffler AL

    Tags: , , , , , , , ,

  • milltek Comments Off
    Milltek-Golf-MK6-R-Exhaust-3-Race-System-Cat-Back-Non-Res-Non-Valved-Polished-01-st Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished
    Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished
    Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished
    Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished
    Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished
    Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished
    Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished

    Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished
    BRAND NEW MILLTEK STAINLESS STEEL 3 RACE SYSTEM CAT BACK NON RESONATED NON VALVED SYSTEM POLISHED TAILS TO FIT GOLF MK6 R 2.0 TSI 270PS 2009 – 2013. A Milltek Stainless Steel 3 Race System. Golf MK6 R 2.0 TSi 270PS. MSVW399REP (Centre Silencer Replacement Pipe). Rear Silencer Assembly (no valve or tips). MSVW373 x 2 (Polished Trims GT100). 3.00-inch (76.20mm). 2 x Polished GT100 Trims. The UK’S No1 Largest Stockist! At Roadrunner we pride ourselves on our personal service that cannot be compared to any of our competitors. Our highly competent sales team are always more than willing to help, whether youre unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. Milltek are the exhaust specialists! Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipe work and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid range torque. Why choose a Milltek Sport exhaust? Milltek Sport exhausts have a genuine performance edge noticeable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture. Highest quality aircraft grade stainless steel. Low pressure systems for maximum performance. Responsibly developed and engineered. Performance exhausts engineered for optimum exhilaration. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49. PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. The item “Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished” is in sale since Wednesday, September 20, 2017. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in Nottingham. This item can be shipped worldwide.
    • Type: Exhaust
    • Part Manufacturer: Milltek
    • Part Manufacturer Number: SSXVW218
    • Manufacturer: Volkswagen
    • Bundle Listing: No
    • Country/Region of Manufacture: United Kingdom
    • Make: Milltek
    • Intended Use: Modification/ Enhancement
    • Model/ Series: Golf Mk6 R 2.0 TSI 270PS 2009 – 2013
    • Subtype: 3″ Race System Cat Back Non-Res Non-Valved Polish
    • SYSTEM TYPE: NON VALVED – Cat Back Non Resonated LOUDER
    • PIPE DIAMETER SIZE OD: 3.00-inch (76.20mm)
    • TAILPIPE: 2 x Polished GT100 Trims
    • Manufacturer Part Number: SSXVW218
    • Classic Car Part: No
    • Other Part Number: SSXVW218
    • Brand: Milltek

    Milltek Golf MK6 R Exhaust 3 Race System Cat Back Non Res Non Valved Polished

    Tags: , , , , , , ,

  • megan Comments Off
    MEGAN-RACING-SUPREMO-AXLE-BACK-EXHAUST-With-BURNT-ROLLED-TIPS-FOR-11-15-F10-535-01-rl MEGAN RACING SUPREMO AXLE BACK EXHAUST With BURNT ROLLED TIPS FOR 11-15 F10 535
    MEGAN RACING SUPREMO AXLE BACK EXHAUST With BURNT ROLLED TIPS FOR 11-15 F10 535
    MEGAN RACING SUPREMO AXLE BACK EXHAUST With BURNT ROLLED TIPS FOR 11-15 F10 535

    MEGAN RACING SUPREMO AXLE BACK EXHAUST With BURNT ROLLED TIPS FOR 11-15 F10 535
    MEGAN RACING SUPREMO AXLE BACK EXHAUST W/ BURNT ROLLED TIPS FOR 11-15 F10 535. PIPING SIZE 2.5. TIP SIZE 3.5. NOTE: All Megan Racing Exhaust and Suspension products are deemed for “off-road use only”– please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws. BEST QUALITY AND PRICE GUARANTEED! Please Double Check Your Fitment on the Product or Message Us Directly!! Our Feedback Speaks for Itself! Fast Parts Warehouse is committed in providing you excellent customer service and getting you your products in an orderly amount of time. We have all the resources to get you the correct products to you the first time, so please ask us if you have any questions at all to ensure that you’re getting the correct item. Sales will be considered final, unless the error is made on our part. With over 15 years of experience in the aftermarket car parts industry, we continue to bring you, the customers, the best products possible. The item “MEGAN RACING SUPREMO AXLE BACK EXHAUST With BURNT ROLLED TIPS FOR 11-15 F10 535″ is in sale since Monday, September 17, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “fastpartswarehouse” and is located in Pomona, California. This item can be shipped worldwide.
    • Brand: MEGAN RACING
    • Manufacturer Part Number: MR-ABE-BF10-VO-RR + MR-ABE-BF10-VO-RL

    MEGAN RACING SUPREMO AXLE BACK EXHAUST With BURNT ROLLED TIPS FOR 11-15 F10 535

    Tags: , , , , , , , , ,

« Previous Entries